经历剪切变形历史的岩石节理表面粗糙特性分析

基于两类岩石节理剪切试验，采用非接触式激光测距仪，实测了剪切前后节理表面粗糙数据，统计分析了岩石节理表面粗糙特性的三维粗糙参数的物理含义，并将这些参数与相应的二维参数进行了充分比较。结果表明，三维参数与二维参数间存在的近似线性关系，而多个三维参数相对比单一的二维参数更全面有效地描述了节理表面粗糙特性。     

红砂岩高陡岩质边坡稳定性分析及治理

充分利用边坡失稳前自身抗滑能力进行高陡边坡治理，结合工程实例，提出了主动性公路边坡治理的思路。分别利用极限平衡法和有限元数值法，综合考虑了两种方法的优缺点，对红砂岩高陡边坡进行了全面的稳定性分析，并针对性地提出了经济合理的治理方案。     

水泥土桩单桩荷载传递及临界桩长研究

将克拉夫-邓肯模型作为传递函数，对水泥土桩荷载传递规律及临界桩长进行了研究，描述了桩周摩阻力的分布及发展规律，并详细讨论了临界桩长的确定标准及各种因素对临界桩长的影响。结果表明，该方法是可行的，该方法同样适用于其它形式的柔性桩。     

从全国水环境数据库看中国水环境状况

以全国水环境数据库的监测记录为第一手资料,以各大流域片为单位,从宏观上介绍了各大流域片的水质总体概况,包括各类水质所占比例、污染水质的超标物类型等,基本反映了我国各大流域在20世纪90年代的水质状况以及水环境的时空变化特征.总的来说,我国的水环境状况不容乐观,水质污染比较严重,尤其是我国北方的流域片.     

淮河息县站流量概率预报模型研究

应用美国天气局采用的由Roman Krzysztofowicz开发的贝叶斯统计理论建立概率水文预报理论框架，即以分布函数形式定量地描述水文预报不确定度，研究了淮河息县站流量概率预报模型。理论和经验表明，概率预报至少与确定性预报一样有价值，特别当预报不确定度较大时，概率预报比现行确定性预报具有更高的经济价值。     

区域水资源与社会经济协调程度评价研究

基于陈守煜多级多目标模糊模式识别模型，提出了区域水资源与社会经济协调程度评价模型。该模型利用级别特征值解决了多层多级多目标系统区域水资源与社会经济协调程度的评价，给出了多个目标隶属函数的计算公式。经分析比较，方法可行，结果合理。     

陕西渭北东部岩溶水环境同位素

陕西渭北东部岩溶水系统是一个复杂的地下水系统，碳酸盐岩大面积隐伏与深埋。使用传统手段和方法勘查岩溶地下水和研究可持续开发利用方案遇到诸多困难，不仅费时，而且耗资大。本文通过系统分析研究陕西渭北东部地区岩溶地下水T、D、^180、^14C环境同位素特征，揭示岩溶水的补给迳流排泄条件、岩溶水系统边界性质以及岩溶水与黄河洛河地表水、黄河岩溶泉与洛河岩溶泉之间的补排关系。结果显示环境同位素方法简便有效，能够达到预期目的。     

Sorption Characteristics of Rare Earth Element Eu^3＋ onto Silica-Water Interfaces Studied by Fluorescence Spectroscopy

The sorption of Eu species onto nano-size silica-water interfaces was investigated using fluorescence spectroscopy for Ph ranges of 1-8.5 and an initial Eu concentration (Ceu) of 2×10-4 M. The sorption rate of Eu was initially low, but significantly increased at Ph>4. The sorption density of Eu species on a silica surface was ～1.58×10-7 mol/m2 when the dissolved Eu species were completely sorbed onto silica-water interfaces at Ph=～5.8. The sorbed Eu species at Ph<6 is aquo Eu3 , which is sorbed onto silica-water interfaces as an outer-sphere complex at Ph<5, but may be sorbed as an inner-sphere bidentate complex at 5相似文献   

Seismic studies of the Brasília fold belt at the western border of the São Francisco Craton, Central Brazil, using receiver function, surface-wave dispersion and teleseismic tomography

The Tocantins Province in Central Brazil is composed of a series of SSW–NNE trending terranes of mainly Proterozoic ages, which stabilized in the Neoproterozoic in the final collision between the Amazon and São Francisco cratons. No previous information on crustal seismic properties was available for this region. Several broadband stations were used to study the regional patterns of crustal and upper mantle structure, extending the results of a recent E–W seismic refraction profile. Receiver functions and surface wave dispersion showed a thin crust (33–37 km) in the Neoproterozoic Magmatic Arc terrane. High average crustal Vp/Vs ratios (1.74–1.76) were consistently observed in this unit. The foreland domain of the Brasília foldbelt, on the other hand, is characterized by thicker crust (42–43 km). Low Vp/Vs ratios (1.70–1.72) were observed in the low-grade foreland fold and thrust zone of the Brasília belt adjacent to the São Francisco craton. Teleseismic P-wave tomography shows that the lithospheric upper mantle has lower velocities beneath the Magmatic Arc and Goiás Massif compared with the foreland zone of the belt and São Francisco craton. The variations in crustal thickness and upper mantle velocities observed with the broadband stations correlate well with the measurements along the seismic refraction profile. The integration of all seismic observations and gravity data indicates a strong lithospheric contrast between the Goiás Massif and the foreland domain of the Brasília belt, whereas little variation was found across the foldbelt/craton surface boundary. These results support the hypothesis that the Brasília foreland domain and the São Francisco craton were part of a larger São Francisco-Congo continental plate in the final collision with the Amazon plate.     

Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.