Instability of gradient dependent elasto-viscoplasticity for clay

A gradient-dependent viscoplastic constitutive model for water saturated clay is proposed to describe the strain localization phenomena and pattern formation during deformation. Second- and fourth-order gradients of volumetric viscoplastic strain are introduced into the constitutive equations to account for the non-local effects due to the motion of microstructures. A linear perturbation analysis is applied to this model. The instability of the government equations (i.e. the constitutive equations and the equations of motion for the clay skeleton and pore water) is discussed for both the one-dimensional and the two-dimensional situations. In addition, issues concerned with the formulation of boundary value problems by finite element analysis in relation to the formulation and the boundary conditions are presented. Copyright © 1999 John Wiley & Sons, Ltd.     

Pathlines of pollutant migration in groundwater of the Visakhapatnam urban area,India

The groundwater regime in the north‐western part of the Visakhapatnam urban area was polluted as early as 1981 by discharge of untreated industrial effluent from a Hindustan Polymers Limited (HPL) plant. A total dissolved solids (TDS) concentration of surficial effluent up to 6500 mg/l and of groundwater in the range 3000–4200 mg/l has been reported in the environs of the HPL plant during May 1992. Groundwater occurs under water table conditions. The groundwater flow model was simulated as a single layer aquifer, using MODFLOW and FLOWPATH computer models. Aquifer parameters were estimated and the value of effective porosity assumed. The water table configuration was mapped in May 1981 using 33 observation wells. The calibrated hydraulic head distribution was used to compute the velocity field using the effective porosity values. The flow paths of groundwater migration from the source locations up to 2002 AD were predicted. Pathlines of particles in the groundwater indicated a predominant north‐east and south‐west migration of groundwater pollution in the area. Copyright © 1999 John Wiley & Sons, Ltd.     

基于高斯距离加权格网法研究华北地区地壳形变特征

分析了高斯距离加权格网法计算应变率的原理和特征,研制了相应的计算程序,并用于华北地区现今地壳应变特征研究。基于华北地区1999～2009年的GPS观测结果,研究了确定高斯平滑半径的原则和方法,并给出华北地区地壳形变多个应变率物理量的分布。结果表明,基于150 km高斯平滑半径计算水平速度梯度能够较好地分辨华北地区的应变率空间变化特征,首都圈地区地壳以张渤带上的左旋剪切为主,其中唐山-秦皇岛地区同时存在南北向的拉张变形;山西带整体表现为沿断裂的右旋剪切变形,同时兼具“南挤北张”特性;郯庐断裂带整体形变特征不显著,在南北两端局部区域存在较小的剪切形变;鄂尔多斯块体内部比较稳定,北缘以拉张和左旋剪切变形为主,西缘表现为左旋剪切以及EW向的挤压特征,南缘的秦岭块体南北两侧分别具有左旋剪切和右旋剪切的特性,东西两侧分别表现为正断拉张与逆断挤压特征。     

Seismic inversion modeling method for faulted basins:a case study of Liaohe Beach in Bijialing region

There is not much correlation between sand content and P-wave impedance in faulted basins , and the prediction results cannot be guaranteed .Due to sedimentary facies control , there is inconsistency between sand content and low frequency trend of P-wave impedance , causing problems for seismic inversion modeling , which directly affects final seismic inversion results .The acoustic impedance increases with burial depth .When the same layers of sand and shale formation endure different compaction , the acoustic impedance values will be dif-ferent .Therefore , The seismic inversion modeling of faulted basin is different from that of conventional basins . The authors built an inversion model using uncompact sandstone percentage , directly compensating for the low frequency trend of the inversion model .In addition, the model's intermediate frequency is similar to P-wave im-pedance , ensuring that the inversion results are converged correctly .The final results of the inversion can be used directly as sandstone percentage .The aforementioned method was applied to Liaohe Beach in the Bijialing region and obtained optimistic lithology inversion effects:the results were correlated well with the depositional facies map and with lithology in the well borehole .The inversion results can be used to define the sand body horizontally and can separate sand bodies vertically , which is very difficult on conventional seismic section . Therefore the inversion results played an important role in reservoir prediction .     

Modelling road surface sediment production using a vector geographic information system

Field investigations indicate that unpaved roads are the largest sediment source on St John, US Virgin Islands. Cross-sectional measurements of eroded road surfaces were used to establish an empirical relationship to predict annual road surface erosion as a function of road gradient and contributing drainage area. A model (ROADMOD) for estimating and mapping average annual sediment production from a road network was developed by combining this empirical relationship with a series of network algorithms to analyse road data stored in a vector geographic information system. ROADMOD was used to estimate road surface erosion in two St John catchments with very different road densities but similar land cover, topography and soils. Unpaved roads were found to increase sediment production in the more densely roaded catchment by a factor of three to eight, and in the less-roaded catchment by a factor of 1·3–2·0. Turbidity measurements in the receiving bays of these two catchments are consistent with model predictions and observed sediment delivery processes. Although this model was developed specifically for St John, it can easily be adapted to other locations by substituting a locally derived predictive equation for road erosion. Model assumptions, limitations and potential improvements are discussed. © 1998 John Wiley & Sons, Ltd.     

Development and application of a distributed catchment-scale hydrological model for the River Ythan,NE Scotland

Mathematical models are being used to develop a decision support system for integrated management of the Ythan catchment in NE Scotland. One component of this has involved the development of a distributed catchment-scale hydrological model. The model is based on subsurface flow routing and calculates the contribution to stream flow from each 50 m×50 m cell in the 548 km² catchment. It uses two topographic parameters, slope and distance to stream following the main line of flow, and five physical parameters. The topographic analysis and distributed flow accumulation are performed by linking the single cell model with a geographic information system. Preliminary results from a three-year simulation of daily flows indicate that the model successfully predicts the main characteristics of the catchment flow. © 1998 John Wiley & Sons, Ltd.     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

Simulation of the direct runoff hydrograph at basin outlet

A simple model describing the transformation of effective rainfall to direct runoff through the overland flow mechanism is presented. The model is based on the classical representation of a watershed by a combination of planes and channels. The dynamics of overland flow in each plane is simulated by the non-linear kinematic wave, but the outflow from a given plane is concentrated in the middle of the corresponding drainage channel. The water routing in the channels is carried out by a piece-wise linearized formulation in space of the kinematic wave approximation. Using synthetic events on 10 watersheds, the model was tested by comparing it with results obtained by applying the non-linear kinematic wave to all the elements of the watershed. The model was found to be adequate, even in a form that simplifies the geometric features of the planes through an averaging procedure based on the Horton–Strahler ordering scheme of the watershed. © 1998 John Wiley & Sons, Ltd.     

泡沫混凝土隧道减震层减震机制

基于泡沫混凝土隧道减震材料,通过室内试验研究了不同密度、围压、应变率条件下泡沫混凝土材料的力学特性。试验结果表明：随着密度的增加,试样的单轴破坏形态由骨架坍塌破坏逐渐转化为劈裂剪切破坏,峰后应变软化与材料脆性增强;随着围压的增加,材料强度增加且延性增强,峰后由应变软化逐渐转换为应变硬化。在中等应变率范围内（10?5/s ～10?3/s）,随着应变率的增加,泡沫混凝土材料的强度近似呈指数增长,同时峰后残余应力增长明显,且塑性应变越大,应变率对峰后应力的影响越大。基于上述试验结果初步建立了泡沫混凝土材料的本构模型。依托嘎隆拉隧道,采用数值方法研究了减震层剪切模量、厚度及减震层-衬砌界面特性3个因素对减震效果的影响规律,相关研究成果可为高烈度区隧道工程减震层的设计提供参考。