Thermal equation of state of magnesite to 32 GPa and 2073 K

Pressure–volume–temperature relations have been measured to 32 GPa and 2073 K for natural magnesite (Mg_0.975Fe_0.015Mn_0.006Ca_0.004CO₃) using synchrotron X-ray diffraction with a multianvil apparatus at the SPring-8 facility. A least-squares fit of the room-temperature compression data to a third-order Birch–Murnaghan equation of state (EOS) yielded K₀ = 97.1 ± 0.5 GPa and K′ = 5.44 ± 0.07, with fixed V₀ = 279.55 ± 0.02 Å³. Further analysis of the high-temperature compression data yielded the temperature derivative of the bulk modulus (∂K_T/∂T)_P = −0.013 ± 0.001 GPa/K and zero-pressure thermal expansion α = a₀ + a₁T with a₀ = 4.03 (7) × 10⁻⁵ K⁻¹ and a₁ = 0.49 (10) × 10⁻⁸ K⁻². The Anderson–Grüneisen parameter is estimated to be δ_T = 3.3. The analysis of axial compressibility and thermal expansivity indicates that the c-axis is over three times more compressible (K_Tc = 47 ± 1 GPa) than the a-axis (K_Tc = 157 ± 1 GPa), whereas the thermal expansion of the c-axis (a₀ = 6.8 (2) × 10⁻⁵ K⁻¹ and a₁ = 2.2 (4) × 10⁻⁸ K⁻²) is greater than that of the a-axis (a₀ = 2.7 (4) × 10⁻⁵ K⁻¹ and a₁ = −0.2 (2) × 10⁻⁸ K⁻²). The present thermal EOS enables us to accurately calculate the density of magnesite to the deep mantle conditions. Decarbonation of a subducting oceanic crust containing 2 wt.% magnesite would result in a 0.6% density reduction at 30 GPa and 1273 K. Using the new EOS parameters we performed thermodynamic calculations for magnesite decarbonation reactions at pressures to 20 GPa. We also estimated stability of magnesite-bearing assemblages in the lower mantle.     

青藏块体强震活动状态分析

强震活动状态分析与研究是地震形势跟踪分析的重要基础,以频次的角度分析和探讨青藏块体的强震状态特征,研究表明,青藏块体存在强震平静与活跃交替活动的状态特征,已经历5个平静与活跃交替活动的状态过程.2008年3月21日于田7.3级地震、5月12日汶川8.0级地震和2010年4月14日玉树7.1级地震的发生表明青藏块体强震活动已处于活跃状态.     

The effects of rock uplift and rock resistance on river morphology in a subduction zone forearc,Oregon, USA

Relationships between riverbed morphology, concavity, rock type and rock uplift rate are examined to independently unravel the contribution of along-strike variations in lithology and rates of vertical deformation to the topographic relief of the Oregon coastal mountains. Lithologic control on river profile form is reflected by convexities and knickpoints in a number of longitudinal profiles and by general trends of concavity as a function of lithology. Volcanic and sedimentary rocks are the principal rock types underlying the northern Oregon Coast Ranges (between 46°30′ and 45°N) where mixed bedrock–alluvial channels dominate. Average concavity, θ, is 0·57 in this region. In the alluviated central Oregon Coast Ranges (between 45° and 44°N) values of concavity are, on average, the highest (θ = 0·82). South of 44°N, however, bedrock channels are common and θ = 0·73. Mixed bedrock–alluvial channels characterize rivers in the Klamath Mountains (from 43°N south; θ = 0·64). Rock uplift rates of ≥0·5 mm a⁻¹, mixed bedrock–alluvial channels, and concavities of 0·53–0·70 occur within the northernmost Coast Ranges and Klamath Mountains. For rivers flowing over volcanic rocks θ = 0·53, and θ = 0·72 for reaches crossing sedimentary rocks. Whereas channel type and concavity generally co-vary with lithology along much of the range, rivers between 44·5° and 43°N do not follow these trends. Concavities are generally greater than 0·70, alluvial channels are common, and river profiles lack knickpoints between 44·5° and 44°N, despite the fact that lithology is arguably invariant. Moreover, rock uplift rates in this region vary from low, ≤0·5 mm a⁻¹, to subsidence (<0 mm a⁻¹). These observations are consistent with models of transient river response to a decrease in uplift rate. Conversely, the rivers between 44° and 43°N have similar concavities and flow on the same mapped bedrock unit as the central region, but have bedrock channels and irregular longitudinal profiles, suggesting the river profiles reflect a transient response to an increase in uplift rate. If changes in rock uplift rate explain the differences in river profile form and morphology, it is unlikely that rock uplift and erosion are in steady state in the Oregon coastal mountains. Copyright © 2006 John Wiley & Sons, Ltd.     

H_∞ drift control of time-delayed seismic structures

In this paper,an optimal H∞ control algorithm was applied to the design of an active tendon system installed at the first story of a multi-story building to reduce its interstory drift due to earthquake excitations.To achieve optimal control performance and to guarantee the stability of the control system,an optimum strategy to select control parameters γ and α was developed.Analytical expressions of the upper and the lower bounds of γ and α were obtained for a single degree-of-freedom system with state fee...     

A mathematical model for steady‐state regolith production at constant erosion rate

It has been hypothesized that many soil profiles reach a steady‐state thickness. In this work, such profiles were simulated using a one‐dimensional model of reaction with advective and diffusive solute transport. A model ‘rock’ is considered, consisting of albite that weathers to kaolinite in the presence of chemically inert quartz. The model yields three different steady‐state regimes of weathering. At the lowest erosion rates, a local‐equilibrium regime is established where albite is completely depleted in the weathering zone. This regime is equivalent to the transport‐limited regime described in the literature. With an increase in erosion rate, transition and kinetic regimes are established. In the transition regime, both albite and kaolinite are present in the weathering zone, but albite does not persist to the soil–air interface. In the weathering‐limited regime, here called the kinetic regime, albite persists to the soil–air interface. The steady‐state thickness of regolith decreases with increasing erosion rate in the local equilibrium and transition regimes, but in the kinetic regime, this thickness is independent of erosion rate. Analytical expressions derived from the model are used to show that regolith production rates decrease exponentially with regolith thickness. The steady‐state regolith thickness increases with the Darcy velocity of the pore fluid, and in the local equilibrium regime may vary markedly with small variations in this velocity and erosion rate. In the weathering‐limited regime, the temperature dependences for chemical weathering rates are related to the activation energy for the rate constant for mineral reaction and to the ΔH of dissolution, while for local equilibrium regimes they are related to the ΔH only. The model illustrates how geochemical and geomorphological observations are related for a simple compositional system. The insights provided will be useful in interpreting natural regolith profiles. Copyright © 2010 John Wiley & Sons, Ltd.     

Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information

Scalar and vector intensity measures are developed for the efficient estimation of limit‐state capacities through incremental dynamic analysis (IDA) by exploiting the elastic spectral shape of individual records. IDA is a powerful analysis method that involves subjecting a structural model to several ground motion records, each scaled to multiple levels of intensity (measured by the intensity measure or IM), thus producing curves of structural response parameterized by the IM on top of which limit‐states can be defined and corresponding capacities can be calculated. When traditional IMs are used, such as the peak ground acceleration or the first‐mode spectral acceleration, the IM‐values of the capacities can display large record‐to‐record variability, forcing the use of many records to achieve reliable results. By using single optimal spectral values as well as vectors and scalar combinations of them on three multistorey buildings significant dispersion reductions are realized. Furthermore, IDA is extended to vector IMs, resulting in intricate fractile IDA surfaces. The results reveal the most influential spectral regions/periods for each limit‐state and building, illustrating the evolution of such periods as the seismic intensity and the structural response increase towards global collapse. The ordinates of the elastic spectrum and the spectral shape of each individual record are found to significantly influence the seismic performance and they are shown to provide promising candidates for highly efficient IMs. Copyright © 2005 John Wiley & Sons, Ltd.     

超临界态甲烷密度研究

超临界甲烷密度不仅是非常规天然气资源量计算与吸附能力测定的重要参数,同时也是衡量超临界甲烷扩散效率与溶解有机物能力的主要指标。通过对比分析各种气体状态方程的适用性,认为基于亥姆霍兹能量基本状态方程可以准确计算0~30 MPa、270~360 K条件下甲烷的密度。利用Microsoft Office Excel编写了甲烷密度的计算程序,与NIST （美国国家标准与技术研究院）商业软件计算结果相比,误差小于0.05%。分析了0~100 MPa、270~360 K范围内甲烷密度的变化规律。结果表明,甲烷密度随压力增大而增大,在低于30 MPa时增速较大且对温度的敏感性较强,高于30 MPa时增速逐渐变缓,且敏感性减弱。在煤层原位条件下随着埋深的增大,甲烷密度随温度升高而减小,随压力增大而增大;在温度与压力共同作用下,甲烷密度呈先增速不变、近似线性增加,后增速逐渐减小、凸曲线形增加的变化规律。游离态甲烷密度受温度的影响比吸附态甲烷小,是深部煤层气资源增量的主要贡献者。研究结果为深部煤层气赋存及其潜力预测提供了基础参数。      

南海油气资源潜力及勘探现状

南海的油气资源极为丰富,享有“第二个波斯湾”的美誉.南海地貌类型多样,地形复杂,其战略位置极为重要,是东亚及相邻各国必经之路.资源之争,使得周边各国使出浑身解数,发展海洋经济与技术,1981年至2002年,越南就从南沙海域的油田中开采了1亿吨石油、15亿多立方米的天然气,获利250亿美元,南海石油已成为越南国民经济的第一大支柱产业.近半世纪中国南海油气勘探工作取得巨大的成就,发现了26个新生代盆地,取得了南海海域的基本石油地质成果,为南海的勘探开发奠定了基础.南海具有巨大的勘探空间及技术发展空间,每一次的技术进步,都会带来南海油气勘探的质的飞跃.     

原油生成温度计算的理论与实践

定量求取原油的成熟度是目前尚未有效解决的问题。Mango发现4个C7的异构化合物相对组成有显著的不变性,提出了稳态催化轻烃成因模式。据该模式的2,4-/2,3-二甲基戊烷比值是一项纯温度参数,Bement和Mango等建立了该轻烃温度参数与埋深温度的函数关系式用于原油生成温度计算,为定量研究原油成熟度提供了新思路。本文以塔中地区为例,计算了原油的Mango参数,得到原油K1平均为1.06,在Mango给出的相对稳定范围。应用原油生成温度公式计算的原油生成温度为120~129℃,折算镜质组反射率R。=0.88%~0.90%,与新藿烷成熟度参数反映的成熟度特征相一致,说明该方法是可靠的。     

The Petrology and Mineralogy Analysis of Noble Metal Alloys in the Inclusions of a Chondrite: An Implication on the Evolution of the Solar Nebula

The calcium-aluminium-rich inclusions (CAIs) in chondrites are believed to be the most early solids formed in the solar system, and retain the original information of the early solar nebula. However, in-depth researches revealed that most inclusions had experienced a complex history of evolution, including partial melting and secondary alteration. Focused on the refractory and chemically stable noble metal particles in the CAI of a CV meteorite (NWA 2140), a study of astrochemistry is made in this paper. The petrology and mineralogy analysis as well as the composition determination have been made on the noble metal particles. Based on the result of composition analysis, the thermodynamic process experienced by the CAI is inferred, and two kinds of noble metal alloys are identified, which correspond to the early-stage condensation products and the secondary alteration products of primordial metals, respectively.