基于傅里叶变换的频谱分析法在X射线轮胎检测中的应用

子午线轮胎的缺陷检测方法比较多,频谱分析法是基于频域的图像分析方法,其主要功能是获取图像在频域中的纹理特征。傅里叶变换能够将时域的信号分解为频域各频率分量下之和,即分解为各个频率下的谱。然后通过对得到的频谱进行图像处理,判断轮胎有无缺陷。实验证明使用基于傅里叶变换的频谱分析法进行子午线轮胎缺陷检测可以大幅降低工作量,提高轮胎检测效率。     

Upper mantle seismic anisotropy beneath a convergent boundary: SKS waveform modeling in central Tibet

This study used SKS waveforms from the International Deep Profiling of Tibet and the Himalayas (INDEPTH) III dataset and a new 2D method for modeling seismic waves in anisotropic media to construct an image of anisotropic structures beneath central Tibet. A preferred model revealed three-segment anisotropic structures in the upper mantle beneath the study region. Waveform modeling demonstrated that the anisotropy was mainly generated by the lithosphere but not the asthenosphere, and that an anisotropic model with a flatter axis of symmetry provides a more consistent interpretation of the observations than models having steeply dipping symmetry axes. A relatively low velocity zone may underlie or intermingle with the anisotropic structures in the northern portion of the region. Synthetic tests also indicate that variations in the elastic constants and depth extent of the anisotropy assumed by the calculations do not affect the general conclusions, although trade-offs exist among certain model parameters. The modeling results suggest that the complex seismic structures in central Tibet were associated with underthrusting of the Indian lithosphere beneath the Asian lithosphere; the inferred flat symmetry axis of the anisotropy was likely generated during this collision process. If this were not the case, the inherited anisotropy would exhibit a steeply dipping axis of symmetry, parallel to the direction of underthrusting.     

基于MODIS谱纹信息融合的海洋溢油检测方法

鉴于仅依赖光谱特征或纹理特征的传统溢油检测算法的信息检测精度较低的问题,本文提出了一种新的光学遥感数据的谱纹海面溢油检测方法。谱是光学遥感数据的油膜敏感波段图像,纹是利用灰度共生矩阵计算获得的图像纹理特征,将这些特征相结合,引入支持向量机方法（Support Vector Machine,SVM）,建立谱纹海面溢油检测模型。本文以2006年渤海溢油事故为例,利用中等分辨率成像光谱仪MODIS的光学遥感数据对溢油进行检测,MODIS的第2波段为油膜敏感波段,所以,第2波段图像即为选取的谱特征,经过对各个纹理特征的分析得到,均值、对比和相关3个特征量可作为溢油提取的纹理特征。检测结果的总体精度达91.23%。试验结果表明,将MODIS图像的光谱特征和纹理特征相结合,可有效地对渤海海洋油膜信息进行检测,并具有很强的抑制噪声能力。     

基于遥感和GIS方法的科尔沁沙地边界划定

基于已有文献,依据科尔沁沙地的形成历史与早期分布,确定科尔沁沙地的核心区;以核心区为基础,采用生态学取样方法,选取与核心区边界相交的16个方向上的交叉点为样本,以Landsat-5 TM影像为主要数据源,采用光谱混合模型、穗帽变换等遥感和GIS方法,通过反复试验设定阈值,提取每个方向的分界特征,据此勾画出科尔沁沙地的分界线。此后,进行实地考察和Google Earth高清影像验证,最终确定科尔沁沙地生态区域的边界。结果表明,科尔沁沙地面积为52 300 ± 360 km²,验证后精度在94%以上。研究结果为科尔沁沙地生态恢复与环境整治提供确切基础范围。     

采用便携式近红外矿物分析仪鉴别注胶翡翠

目前,采用传统的中红外光谱技术鉴别不透明注蜡与注胶翡翠有一定的难度。采用便携式近红外矿物分析仪检测鉴定了翡翠、注蜡与注胶翡翠样品,对其近红外反射光谱进行了分析与研究,同时对微透明样品作了中红外透射光谱的比对测试。研究结果表明,采用BJKF-1型便携式近红外矿物分析仪,能获得较好的透明或不透明翡翠、注蜡与注胶翡翠样品的近红外反射光谱,三者的近红外光谱特征存在着明显的差异。利用这些特征可有效地鉴别翡翠、注蜡翡翠与注胶翡翠。     

基于统计判别法的不同类型植被高光谱数据分析研究

该文利用统计学方法对不同植物的多个采样光谱样本进行比较分析。选用大豆、红薯、茶树、松树的19个野外采样光谱样本,采用Mann-Whitney U检验方法和马氏距离判别法进行比较分析,结果显示,Mann-Whitney U检验适用于同一地物反射光谱的采样样本,判别分析方法适用于不同地物的采样样本,两种方法基本能达到区分的效果。     

地下地震动频谱特点研究

本以美国加州强震观测计划(CSMIP）的6个岩土工程台阵的429条地表和地下地震动程为数据基础,按照各台阵场地土层分布情况将台阵分为七层和“上层／基岩”两类。对于同一类场地,将其中的各次地震,按照震级的大小将其分为三类;对于同一类地震,首先计算各地震的水下分量5％阻尼的反应谱以及相应的标准反应谱,并得到各深度测点相对于最深处测点的反应谱比值,分析比较两类场地下各深度反应谱的特点,另外,傅里叶谱也是本分析的一部分,通过对不同深度地下地震动的反应谱和傅氏谱的比较,得到了一些较有意义的结论,以供工程参考。     

月球表面主要矿物反射光谱特性研究

分析了矿物在可见光及近红外区光谱生成的机理,介绍了月球表面最为主要的四种矿物——辉石、斜长石、橄榄石、钛铁矿,并分析了它们各自光谱特征及生成原因,讨论了造成同种矿物光谱差异的原因,给出了它们各自的标志性特征。     

基于Landsat7ETM+的青岛地区热岛效应反演及分析

用水源热泵技术,将矿井回风、矿井水、洗浴废水、冷却水（风）中的低品位废热转变为供热热能。该热泵热回收技术系统可靠、经济效益好,可达到节能减排的目的。该文分析了矿井系统中的废热类型和应用原理,给出了矿井回风、矿井水、洗浴废水、冷却水（风）废热回收量的计算方法,并分析了山东济宁梁宝寺煤矿矿井废热回收供热系统设计实例。认为该技术的应用为矿区提供了生产、生活必备的热源和热水,节约了生产成本,保障了煤矿企业的绿色生产,改善了矿区周围的生活环境。     

Fragility analysis of low‐rise masonry in‐filled reinforced concrete buildings by a coefficient‐based spectral acceleration method

This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd.