SH波上方垂直入射时界面附近椭圆夹杂与裂纹的动态响应

采用Green函数、保角映射等方法分析SH波上方垂直入射时弹性半空间中椭圆形弹性夹杂与任意方位裂纹的相互作用。首先,求解含椭圆形弹性夹杂的弹性半空间内任意一点承受时间谐和出平面线源荷载作用时的位移基本解,即Green函数,再结合裂纹切割法构造裂纹,得到SH波上方垂直入射时椭圆夹杂和裂纹同时存在条件下的位移场与应力场。作为算例,给出大量的数值结果,探讨不同参数情况下弹性夹杂周边动应力集中系数（DSCF）、地表位移及裂纹尖端动应力强度因子（DSIF）的分布规律,结果表明不同参数的变化会对三者的分布带来一定的影响。     

基于有效固结应力法确定结构性黏性土不排水抗剪强度

由于结构性的存在使得很多天然黏性土的强度和变形特性不同于重塑土和非结构性土。首先回顾了适用于确定重塑土和非结构性土不排水抗剪强度的有效固结应力法,并推导了相应的方程。在此基础上,对于结构性黏性土,采用两段不同斜率（内摩擦角正切）和截距（黏聚力）的直线模拟其抗剪强度包络线,建立了确定其不排水抗剪强度的有效固结应力法方程;当有效应力小于结构屈服应力时,有效固结应力方程中有效应力部分需乘以0.8的修正系数;只要已知剪切前的有效应力,利用相应的有效固结应力法公式,可确定结构性土体的不排水抗剪强度。利用连云港结构性软黏土的等压固结三轴试验数据,验证了有效固结应力法的适用性。分析表明：对于连云港软黏土的不排水抗剪强度,有效固结应力法的计算结果与试验结果吻合较好;对于结构屈服应力,有效固结应力法的预测结果与试验数据点的拟合结果有一定偏差,但并不明显。     

地震动作用下均匀土质边坡的临界转角分析

均质土坡变形的整体旋转角度（即转角）与其弧形滑动特征相协调,是比永久位移更为优越的土坡变形与稳定性表征量。地震动瞬态弹性变形应变能相当于土坡系统势能的动态随机性“涨落”,临界点（临界转角）作为系统本身的一个固有特性,不受地震动随机性“涨落”的影响,土坡滑动失稳的临界转角实质上对应着系统势能的突变点。基于均质土坡地震动失稳的特点,结合突变理论,给出了确定失稳临界转角的计算公式,发现其仅与滑带介质本构模型参数 、 和滑弧半径R有关,但在本质上体现了诸因素的影响而具有广泛适用性。     

Discipline progress of mineral mapping of gold deposit in China

Sanjiang and Jiaodong areas are the important gold regions in China. The gold mineralization is cor- related with the Mesozoic faults and its derivative faults in the granite or the contact zone between granite and base rock. The mineral mapping is one of the important approaches of prospecting mineralogy. The temporal and spatial band distribution of mineral, mineral combination and mineral typomorphism features are natural regularity rules, but this kind of band feature is sometimes hidden and thus in need of mineral typomorphism re- search and mapping to disclose this band feature and to serve for the prospecting of mineral. The changes of the mineral typomorphism feature are often embodied in the ＂ through＂ mineral, the typomorphism features of the through mineral change like the gradient toward the ore body, and the changes of the features are most obvious and strongest toward the orebodies. The new American mineralogy mapping indicates the weak change of the mineral composition or structure will lead to the change of the shape and wave length position of the specific ab- sorbent feature. Australian experiment lab investigation has held the reason of a series of mineral. The progress achievement of the remote sensing and computer analysis technology now permits a direct comparison directly between the lab and remote sensing data, so the good feature database of the experiment light spectroscopy can serve for drawing of the spacial distribution and remote sensing material. Mineralogy mapping raised the exten- sive emphasis in the international earth arena.     

以夹角调制的矢量地图可逆水印算法

传统水印嵌入方法往往导致原始载体数据质量的下降,而可逆水印技术由于能完整恢复原始载体数据,因此,在精度要求较高的矢量地图版权保护应用中具有较高的适用性。目前,栅格图像的可逆水印算法研究较为成熟,而在矢量地图领域则主要借鉴栅格图像的相关方法,由于没有充分利用矢量数据的组织特性,因此鲁棒性不强。针对上述问题,本文以矢量地图坐标点之间的基本空间关系在常规地图操作前后的不变性,提出一种鲁棒的矢量地图可逆水印算法。算法首先利用道格拉斯—普克方法将要素点分为特征点与非特征点两类,在此基础上计算每个非特征点与其相邻前后特征点连线所构成的夹角。在水印嵌入时,利用该夹角来映射水印比特位,并通过调整非特征点坐标来对该夹角进行调制以实现水印信息的嵌入。实验表明该算法所生成的水印具有一般可逆水印的不可感知性与可逆性,同时,对旋转、平移、要素排序、裁剪、压缩、简化等攻击也具有较好的鲁棒性。     

Optimization of slope angle and its seismic stability: A case study for the proposed open pit coalmine in Phulbari, NW Bangladesh

The present study reflects upon the results of substantial program of two-dimensional Finite Element Method （FEM） numerical analyses of the open pit that links to slope angle optimization associated with the safety factor of the pit slope of a coal mine in Bangladesh. In the present analyses, two types of models have been presented. The first model estimates safety factor without seismic effect on the overall pit slope of the model; the second model incorporates safety factor with seismic stability of the model. The calculated optimum slope angle of the first model is 31% with a rational safety factor of 1.51, prior to the seismic effect. However, the value is reduced to 0.93, 0.82, and 0.72, after we applies the seismic effect in the second model with M6, M6.5, and M7, respectively. Finally, our modeling results emphasize that for the case of the proposed Phulbari coalmine, there is extremely high prospect for causing massive slope failure along the optimum pit slope angle with 31% if the mine area felt seismic shaking, like the Sikkim （in northern India） earthquake with M6.9 on September 18, 2011.     

基于Landsat7ETM+的青岛地区热岛效应反演及分析

用水源热泵技术,将矿井回风、矿井水、洗浴废水、冷却水（风）中的低品位废热转变为供热热能。该热泵热回收技术系统可靠、经济效益好,可达到节能减排的目的。该文分析了矿井系统中的废热类型和应用原理,给出了矿井回风、矿井水、洗浴废水、冷却水（风）废热回收量的计算方法,并分析了山东济宁梁宝寺煤矿矿井废热回收供热系统设计实例。认为该技术的应用为矿区提供了生产、生活必备的热源和热水,节约了生产成本,保障了煤矿企业的绿色生产,改善了矿区周围的生活环境。     

Fragility analysis of low‐rise masonry in‐filled reinforced concrete buildings by a coefficient‐based spectral acceleration method

This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd.     

基于谱修正方法的非高斯风场模拟

为克服基于H erm ite谱修正方法的缺点,减少该方法中计算H erm ite多项式系数所需耗费的大量机时,提出了一种模拟非高斯风压场的新方法,采用非高斯累积分布函数（CDF）映射技术来代替基于H erm ite的概率密度函数（PDF）修正。选择任意边缘PDF模型作为概率目标模型,采用目标功率谱密度（PSD）作为样本函数,通过迭代修正该样本函数,使其收敛于目标概率密度函数和目标功率谱密度。将该方法应用于实际结构的非高斯风场模拟,模拟结果与目标谱符合良好,表明本文方法模拟非高斯风场具有较高的精确度和计算效率。     

Estimation of seawater movement based on reflectors from a seismic profile

Seismic oceanography is a new cross-discipline of reflection seismology and physical oceanography. The biggest difference between seismic oceanography and traditional reflection seismology is its research object of time-varied seawater. How to estimate the temporal variations of reflectors in water structure and make some corrections in seismic data are basic problems in seismic oceanography research. Here a method of estimation for seawater movement is provided based on the reflectors. The application results of this method to the simulated and field seismic data turn out to be acceptable. As compared with the previous research, this method has the advantages of low-dependence on migration velocity and dip of reflectors, and it is very suitable for correction in a spectral analysis using seismic data, which is very useful in the research of ocean energy budget.