Evaluation of pullout load capacity of suction caissons in sand using a three-dimensional displacement approach

An investigation was conducted to obtain analytical solutions for the pullout behavior of a suction caisson undergoing inclined loads in sand. The inclined load is transformed into an equivalent load system in which the vertical, horizontal, and moment loads are applied on the center of the lid of the suction caisson. The vertical and lateral stiffness coefficients along the skirt of the suction caisson in sands are presented using the new three-dimensional elastic solutions taking into account the nonhomogeneous and nonlinear properties of the sand. The vertical, lateral, and rocking stiffness coefficients on the base of the suction caisson are presented considering the solutions of a hollow rigid cylindrical punch acting on the surface of a soil. The yield, pullout, and failure for sands with the nonhomogeneous and nonlinear characteristics are taken into consideration. The effects of the load inclination, the loading depth, and the aspect ratio on the pullout load capacity of the suction caisson are presented. Behaviour of the suction caisson in sand prior to failure is clarified from the relationship between tensile load, displacement, and rotation and that between depth, vertical pressure, and lateral pressure.     

分析土和结构相互作用的一种实用耦合方法

提出一种新的数值解与解析解耦合的理论和计算方法,研究土-结构相互作用(SSI)体系的地震动力响应。采用大型有限元软件OpenSees模拟复杂结构的非线性行为,用等效线弹性频域内解析解模拟地基土的行为,使用时域离散递归方法将频域内的解析解转化到时域内,再通过子结构边界上力和位移的协调条件来求解。二者之间的耦合和实时数据交流通过CS集成方法来实现。以一个单自由度算例和一个实际工程为例,验证此方法的精度、稳定性和工程实用性,对比在考虑和不考虑SSI体系情况下结构动力响应的区别。本文所提的耦合SSI计算方法和部分研究成果可为工程设计人员提供参考。     

Analytical model of well leakage pressure perturbations in a closed aquifer system

Deep saline aquifers are commonly used for disposal and storage of various surface fluids. The target injection zone must be hydraulically isolated from overlying zones in order to ensure containment of the injected fluids. Improperly plugged nonoperational abandoned wells that penetrate the injection zone are the main potential leakage pathways. Leakage through such wells may cause an observable pressure signal in a zone overlying the injection zone; such a signal can be used to detect the leakage. In this paper we develop an analytical model to evaluate the pressure change induced by leakage through a well in a multilayer system. Unlike previous analytical models on the topic, our model uses a closed system, which may significantly affect the strength and behavior of the pressure signal induced by leakage. The analytical model is first presented for a two-layer system centered at the leaky well location. We evaluate the leakage-induced pressure change using the Laplace transform of Duhamel’s superposition integral, yielding the solution in the Laplace domain. We then derive a late-time asymptotic solution using the final value theorem, which suggests that the leakage rate becomes constant after sufficient time. We then obtain the multilayer solution by extending the two-layer solution and presenting it in matrix form in the Laplace domain. We apply the solution to three examples. In the first example, we apply the analytical model to a two-layer system, investigating its behavior and comparing the results with a numerical solution. In order to demonstrate behavior and potential applications of the multilayer analytical model, we present two multilayer examples: one with identical layers and another, replicating a CO₂ storage site, with dissimilar layers. The leakage-induced pressure change does not necessarily decrease as the distance increases from the injection zone toward the surface.     

2010年6月广西凌云-凤山交界3级震群应力水平分析

2010年6月28日至8月15日,在广西凌云与凤山交界持续发生了高密集、高集中、高频率的震群活动,共记录地震3 071次,其中ML2~2.9级地震41次,3级以上地震3次,最大为7月1日10时27分3.2级地震。对此次震群的空间分布范围、2级以上地震震源机制解P轴优势方向、b值特征、应力降等进行了分析研究。结果表明,此次震群震中集中,深度较浅,震源机制解P轴没有形成优势分布,序列参数b值较高,约为1.21,应力降主要分布在0.19~2.0 Mpa之间,认为广西凌云-凤山交界3级震群是属于低应力背景下的地震活动,不具有前兆震群和前震序列的性质。分析结果对正确了解此次震群的特征、正确判断地震趋势具有一定的帮助作用。     

中国前新生代残留盆地油气勘探难点分析及对策

中国50年油气勘探的历程主要在新生代陆相生油的指导思想下,发现了大庆、胜利等大油田,取得了辉煌的成就,形成了一套针对新生代陆相断陷湖盆油气勘探的理论与方法.时至今日,能源的增长已远远跟不上经济的高速发展,提出“油气二次创业”,前新生代海相残留盆地就是主战场.残留盆地的勘探难点集中在三方面,一是勘探思路局限,二是勘探程度低,三是勘探技术的限制;根据这些难点提出5项对策来解决残留盆地的勘探问题.     

Focal Mechanism Solutions of the 2008 Wenchuan earthquake sequence from P-wave polarities and SH/P amplitude ratios: new results and implications

The 2008 Wenchuan earthquake, a major intraplate earthquake with M _w 7.9, occurred on the slowly deforming Longmenshan fault. To better understand the causes of this devastating earthquake, we need knowledge of the regional stress field and the underlying geodynamic processes. Here, we determine focal mechanism solutions (FMSs) of the 2008 Wenchuan earthquake sequence (WES) using both P-wave first-motion polarity data and SH/P amplitude ratio (AR) data. As P-wave polarities are more reliable information, they are given priority over SH/P AR, the latter of which are used only when the former has loose constraint on the FMSs. We collect data from three categories: (1) permanent stations deployed by the China Earthquake Administration (CEA); (2) the Western Sichuan Passive Seismic Array (WSPSA) deployed by Institute of Geology, CEA; (3) global stations from Incorporated Research Institutions for Seismology. Finally, 129 events with magnitude over M _s 4.0 in the 2008 WES are identified to have well-constrained FMSs. Among them, 83 are well constrained by P-wave polarities only as shown by Cai et al. (Earthq Sci 24(1):115–125, 2011), and the rest of which are newly constrained by incorporating SH/P AR. Based on the spatial distribution and FMSs of the WES, we draw following conclusions: (1) the principle compressional directions of most FMSs of the WES are subhorizontal, generally in agreement with the conclusion given by Cai et al. (2011) but with a few modifications that the compressional directions are WNW–ESE around Wenchuan and ENE–WSW around Qingchuan, respectively. The subhorizontal compressional direction along the Longmenshan fault from SW to NE seems to have a left-lateral rotation, which agrees well with regional stress field inverted by former researchers (e.g., Xu et al., Acta Seismol Sin 30(5), 1987; Acta Geophys Sin 32(6), 1989; Cui et al., Seismol Geol 27(2):234–242, 2005); (2) the FMSs of the events not only reflected the regional stress state of the Longmenshan region, but also were obviously controlled by the faults to some extent, which was pointed out by Cai et al. (2011) and Yi et al. (Chin J Geophys 55(4):1213–1227, 2012); (3) while the 2008 Wenchuan earthquake and some of its strong aftershocks released most of the elastic energy accumulated on the Longmenshan fault, some other aftershocks seem to occur just for releasing the elastic energy promptly created by the 2008 Wenchuan earthquake and some of its strong aftershocks. (4) Our results further suggest that the Longmenshan fault from Wenchuan to Beichuan was nearly fully destroyed by the 2008 Wenchuan earthquake and accordingly propose that there is less probability for great earthquakes in the middle part of the Longmenshan fault in the near future, although there might be a barrier to the southwest of Wenchuan and it is needed to pay some attention on it in the near future.     

非线性四阶四点边值问题的正解

利用锥不动点定理,并结合Green函数性质,证明一类四阶四点边值问题的正解的存在性.     

Numerical modelling of rise and fall of a dense layer in salt diapirs

Numerical models are used to study the entrainment of a dense anhydrite layer by a diapir. The anhydrite layer is initially horizontally embedded within a viscous salt layer. The diapir is down-built by aggradation of non-Newtonian sediments ( n = 4, constant temperature) placed on the top of the salt layer. Several parameters (sedimentation rate, salt viscosity, perturbation width and stratigraphic position of the anhydrite layer) are studied systematically to understand their role in governing the entrainment of the anhydrite layer. High sedimentation rates during the early stages of the diapir evolution bury the initial perturbation and, thus, no diapir forms. The anhydrite layer sinks within the buried salt layer. For the same sedimentation rate, increasing viscosity of the salt layer decreases the rise rate of the diapir and reduces the amount (volume) of the anhydrite layer transported into the diapir. Model results show that viscous salt is capable of carrying separate blocks of the anhydrite layer to relatively higher stratigraphic levels. Varying the width of the initial perturbation (in our calculations 400–800 m), from which a diapir triggers, shows that wider diapirs can more easily entrain an embedded anhydrite layer than the narrower diapirs. The anhydrite layer is entrained as long as rise rate of the diapir exceeds the descent rate of the denser anhydrite layer. We conclude that the four parameters mentioned above govern the ability of a salt diapir to entrain an embedded dense layer. However, the model results show that the entrained blocks inevitably sink back if the rise rate of the diapir is less than the rate of descent of the anhydrite layer or the diapir is permanently covered by a stiff overburden in case of high sedimentation rates.