First seismic record for intra-arc strike-slip tectonics along the Liquiñe-Ofqui fault zone at the obliquely convergent plate margin of the southern Andes

A temporal seismic network recorded local seismicity along a 130 km long segment of the transpressional dextral strike-slip Liquiñe-Ofqui fault zone (LOFZ) in southern Chile. Seventy five shallow crustal events with magnitudes up to M_w 3.8 and depths shallower than 25 km were observed in an 11-month period mainly occurring in different clusters. Those clusters are spatially related to the LOFZ, to the volcanoes Chaitén, Michinmahuida and Corcovado, and to active faulting on secondary faults. Further activity along the LOFZ is indicated by individual events located in direct vicinity of the surface expression of the LOFZ. Focal mechanisms were calculated using deviatoric moment tensor inversion of body wave amplitude spectra which mostly yield strike-slip mechanisms indicating a NE–SW direction of the P-axis for the LOFZ at this latitude. The seismic activity reveals the present-day activity of the fault zone. The recent M_w 6.2 event near Puerto Aysén, Southern Chile at 45.4°S on April 21, 2007 shows that the LOFZ is also capable of producing large magnitude earthquakes and therefore imposing significant seismic hazard to this region.     

A seismic source zone model for the seismic hazard assessment of the Italian territory

We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.

We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.

The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.

ZS9 is made out of 36 zones where earthquakes with M_w > = 5 are expected. It also assumes that earthquakes with M_w up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.

Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates.     

安徽省黄山地区唐家坞组生物地层

安徽省南部黄山市刘村一带唐家坞组的时代以往归为晚志留世,新近在唐家坞组中采获腕足类、瓣鳃类、腹足类等多门类化石,并首次采获胞石、鹦鹉螺等化石,其中胞石Conochitina(Densichitana)dens的时代为兰多维列世末至文洛克世初期,含这些化石的层位相当于秀山动物群的层位。结合地质情况分析,唐家坞组时限主要属于早志留世。     

土壤中氟的形态分析

以宁夏盐池地区高氟土壤为例,采用连续提取法对土壤样品中各形态氟进行提取,离子色谱法测定各形态氟的含量。根据研究目的及土壤特点将氟的形态划分为水溶态、离子交换态、可还原态、可氧化态及残渣态5种形态;对各种形态连续提取过程中使用的提取液进行了选择。采用建立的方法获得提取土壤中F-的检出限为0.76μg/g;方法精密度(RSD,n=7)各形态氟为水溶态氟11.3%,离子交换态氟13.5%,可还原态氟10.7%,可氧化态氟8.9%。     

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。     

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.     

Environmental contamination of Zn,Cd, Ni,Cu, and Pb from industrial areas in Hamadan Province,western Iran

Eleven surface soil samples from calcareous soils of industrial areas in Hamadan Province, western Iran were analyzed for total concentrations of Zn, Cd, Ni, Cu and Pb and were sequentially extracted into six fractions to determine the bioavailability of various heavy metal forms. Total Zn, Cd, Ni, Cu and Pb concentrations of the contaminated soils were 658 (57–5,803), 125.8 (1.18–1,361), 45.6 (30.7–64.4), 29.7 (11.7–83.5) and 2,419 (66–24,850) mg kg⁻¹, respectively. The soils were polluted with Zn, Pb, and Cu to some extent and heavily polluted with Cd. Nickel values were not above regulatory limits. Copper existed in soil mainly in residual (RES) and organic (OM) fractions (about 42 and 33%, respectively), whereas Zn occurred essentially as RES fraction (about 69%). The considerable presence of Cd (30.8%) and Pb (39%) in the CARB fraction suggests these elements have high potential biavailability and leachability in soils from contaminated soils. The mobile and bioavailable (EXCH and CARB) fractions of Zn, Cd, Ni, Cu, and Pb in contaminated soils averaged (7.3, 40.4, 16, 12.9 and 40.8%), respectively, which suggests that the mobility and bioavailability of the five metals probably decline in the following order: Cd = Pb > Ni > Cu > Zn.     

Bedrock, soils, and hillslope hydrology in the Central Texas Hill Country, USA: implications on environmental management in a carbonate-rock terrain

The Hill Country of Central Texas, USA, is undergoing rapid socioeconomic development, but environmental management of this region is hampered by misconceptions about local bedrock, soils, terrain, and hydrologic processes. The Hill Country is underlain mostly by Glen Rose Limestone (Lower Cretaceous) and exhibits a stepped terrain, which has been incorrectly attributed to alternating hard and soft bedrock strata. Other characteristics mistakenly attributed to this landscape include thin soils with scant water-retention capabilities, and rapid runoff as the dominant hydrologic process. This report presents new findings: unweathered bedrock is well indurated, but interbeds exhibit variable weathering rates. Recessive slopes (“risers”) on this stepped terrain result from rapid deterioration of strata having generally heterogeneous depositional fabrics (bioturbation and irregular clay partings) in contrast to ledge-forming strata having homogeneous fabrics. A stony regolith is thus formed beneath risers, providing porous and permeable ground that retards runoff and promotes the formation of moderately deep to deep (two-tiered) regolith/soil zones. These surficial materials on local steep slopes compose important natural environmental buffers; they support diverse biota and enhanced geochemical cycling of nutrients; they also exhibit significant water retention and enhanced erosion abatement. Proper land management demands recognition of these attributes in the siting, design, and construction of facilities.     

The relationship between hydrodynamic properties and weathering of soils derived from volcanic rocks,Galapagos Islands (Ecuador)

The aim of this interdisciplinary study is to examine a component of the hydrological cycle in Galapagos by characterizing soil properties. Nine soil profiles were sampled on two islands. Their physical and hydrodynamic properties were analyzed, along with their mineralogical composition. Two groups of soils were identified, with major differences between them. The first group consists of soils located in the highlands (>350 m a.s.l.), characterized by low hydraulic conductivity (<10⁻⁵ m s⁻¹) and low porosity (<25%). These soils are thick (several meters) and homogeneous without coarse components. Their clay fraction is considerable and dominated by gibbsite. The second group includes soils located in the low parts of the islands (<300 m a.s.l.). These soils are characterized by high hydraulic conductivity (>10⁻³ m s⁻¹) and high porosity (>35%). The structure of these soils is heterogeneous and includes coarse materials. The physical properties of the soils are in good agreement with the variations of the rainfall according to the elevation, which appears as the main factor controlling the soil development. The clayey alteration products constrain soils physical and hydrodynamic properties by reducing the porosity and consequently the permeability and also by increasing water retention.     

Numerical modeling assessment of three-gate structures for capturing contaminated groundwater

This modeling study evaluated the capability of alternative funnel-and-gate structures with three gates for capturing contaminated groundwater in a hypothetical unconfined aquifer. Simulated interceptor structures were linear and 45 m wide, consisting of three gates and two funnels (walls). One gate occupied the center and two gates occupied the ends of the interceptor structures. The structures, positioned perpendicular to regional groundwater flow, traversed the entire thickness of the aquifer. A total of four structures were evaluated (numbers designate widths of end, center, and end gates, respectively, in meters): 3-3-3, 2-5-2, 1-7-1, and 4-1-4. Particle tracking and zonal water budgets identified shapes of capture zones and discharge patterns for each interceptor structure. A mass transport model, accounting for advection and hydrodynamic dispersion, tested the capability of each structure for capturing a contaminant plume. Results suggest that: time-dependent capture zones underestimate the amount of time to capture a contaminant plume, wide center gates facilitate plume capture, and wide end gates facilitate lateral containment of contaminants. Of the structures simulated, the 2-5-2 configuration was relatively efficient at processing and containing the simulated contaminant plume.