A broad‐scale assessment of the effect of improved soil management on catchment baseflow index

Although the importance of sustainable soil management is recognized, there are many threats to soils including widespread soil structural degradation. This reduces infiltration through the soil surface and/or the percolation of water through the soil profile, with important consequences for crop yields, nutrient cycling and the hydrological response of catchments. This article describes a broad‐scale modelling approach to assess the potential effect that improved agricultural soil management, through reduced soil structural degradation, may have on the baseflow index (BFI) of catchments across England and Wales. A daily soil–water balance model was used to simulate the indicative BFI of 45 696 thirty‐year model runs for different combinations of soil type, soil/field condition, land cover class and climate which encapsulate the variability across England and Wales. The indicative BFI of catchments was then calculated by upscaling the results by spatial weighting. WaSim model outputs of indicative BFI were within the 95% confidence intervals of the national‐average BFI values given for the Hydrology of Soil Type (HOST ? ) classes for 26 of the 28 classes. At the catchment scale, the concordance correlation coefficient between the BFI from the WaSim model outputs and those derived from HOST was 0·83. Plausible improvements in agricultural soil/field condition produced modest simulated increases of up to 10% in the indicative BFI in most catchments across England and Wales, although for much of southern and northern England the increases were less than 5%. The results suggest that improved soil management might partially mitigate the expected adverse effects of climate change on baseflow to rivers. Healthy, well‐functioning soils produce many additional benefits such as better agricultural yields and reduced pollutant movement, so improved soil management should provide win‐win opportunities for society, agricultural systems and the environment and provide resilience to some of the expected environmental impacts of climate change. Copyright © 2011 John Wiley & Sons, Ltd.     

Implementing quality control on a random number stream to improve a stochastic weather generator

For decades, stochastic modellers have used computerized random number generators to produce random numeric sequences fitting a specified statistical distribution. Unfortunately, none of the random number generators we tested satisfactorily produced the target distribution. The result is generated distributions whose mean even diverges from the mean used to generate them, regardless of the length of run. Non‐uniform distributions from short sequences of random numbers are a major problem in stochastic climate generation, because truly uniform distributions are required to produce the intended climate parameter distributions. In order to ensure generation of a representative climate with the stochastic weather generator CLIGEN within a 30‐year run, we tested the climate output resulting from various random number generators. The resulting distributions of climate parameters showed significant departures from the target distributions in all cases. We traced this failure back to the uniform random number generators themselves. This paper proposes a quality control approach to select only those numbers that conform to the expected distribution being retained for subsequent use. The approach is based on goodness‐of‐fit analysis applied to the random numbers generated. Normally distributed deviates are further tested with confidence interval tests on their means and standard deviations. The positive effect of the new approach on the climate characteristics generated and the subsequent deterministic process‐based hydrology and soil erosion modelling are illustrated for four climatologically diverse sites. Copyright © 2007 John Wiley & Sons, Ltd.     

Aquifer heterogeneity determination through the slope method

In arid‐region wadis, groundwater storage lies within shallow Quaternary alluvium deposits, which are connected with the present‐day hydrological cycle and, therefore, are replenished due to occasional runoff and flash flood occurrences. The groundwater resources are precious in these environments; therefore, their potentiality must be assessed with care in the best manner. The aquifer potentiality is calculated after the storativity and transmissivity parameter estimations, which require rather long‐duration field tests with restrictive assumptions in the theoretical model developments, such as the homogeneity and isotropy. It is the main purpose of this paper to expose the fundamentals of the slope‐matching procedure (SMP) and its application for short‐duration field tests in arid‐region aquifers. In this manner, the subsurface hydrogeological behaviours of the bored land pieces at and around the well locations are prospected in a detailed and refined manner. It is shown that in many cases the classical techniques are appropriate, inconvenient and inapplicable with conclusive reliable results and conclusions. The application of the SMP is presented for some aquifer tests from the central western part of the Kingdom of Saudi Arabia. Copyright © 2007 John Wiley & Sons, Ltd.     

Spatio‐temporal distribution of near‐surface and root zone soil moisture at the catchment scale

Soil moisture is highly variable both spatially and temporally. It is widely recognized that improving the knowledge and understanding of soil moisture and the processes underpinning its spatial and temporal distribution is critical. This paper addresses the relationship between near‐surface and root zone soil moisture, the way in which they vary spatially and temporally, and the effect of sampling design for determining catchment scale soil moisture dynamics. In this study, catchment scale near‐surface (0–50 mm) and root zone (0–300 mm) soil moisture were monitored over a four‐week period. Measurements of near‐surface soil moisture were recorded at various resolutions, and near‐surface and root zone soil moisture data were also monitored continuously within a network of recording sensors. Catchment average near‐surface soil moisture derived from detailed spatial measurements and continuous observations at fixed points were found to be significantly correlated (r² = 0·96; P = 0·0063; n = 4). Root zone soil moisture was also found to be highly correlated with catchment average near‐surface, continuously monitored (r² = 0·81; P < 0·0001; n = 26) and with detailed spatial measurements of near‐surface soil moisture (r² = 0·84). The weaker relationship observed between near‐surface and root zone soil moisture is considered to be caused by the different responses to rainfall and the different factors controlling soil moisture for the soil depths of 0–50 mm and 0–300 mm. Aspect is considered to be the main factor influencing the spatial and temporal distribution of near‐surface soil moisture, while topography and soil type are considered important for root zone soil moisture. The ability of a limited number of monitoring stations to provide accurate estimates of catchment scale average soil moisture for both near‐surface and root zone is thus demonstrated, as opposed to high resolution spatial measurements. Similarly, the use of near‐surface soil moisture measurements to obtain a reliable estimate of deeper soil moisture levels at the small catchment scale was demonstrated. Copyright © 2007 John Wiley & Sons, Ltd.     

A multi‐year study of rainfall and soil water controls on Scots pine transpiration under Mediterranean mountain conditions

This study is focused on the analysis of the relationship between sap‐flow‐derived transpiration measured in a Scots pine stand in the Vallcebre research catchments (NE Iberian Peninsula) and meteorological and rainfall data. The first part of the study is focused on the analysis of temperature and rainfall anomalies. Then, the Scots pine transpiration response to inter‐annual rainfall variability, soil water stress and water table depth variations during the period 1997–2000 is analysed. This period includes the extremely dry year of 1998, which allows us to infer the response of Scots pine transpiration to severe droughts. Scots pine transpiration during the summer presented a high inter‐annual variability, largely related to rainfall amounts. Daily transpiration during dry summers was 40% of the transpiration of a summer day with average rainfall. Moreover, during dry summers, transpiration rates were not fully recovered even after significant rainfall events. The analysis of the dependence of Scots pine transpiration on available water indicated the strong limitation on transpiration induced by water content in the whole soil profile as well as by water table position. Under these drought conditions, a reduction of runoff and deep water stores was observed at the catchment scale, suggesting that the predicted increase in the frequency of severe summer droughts may threaten the current role of Mediterranean mountain catchments as suppliers of water resources for lowland areas. Copyright © 2010 John Wiley & Sons, Ltd.     

Factor of safety in a partially saturated slope inferred from hydro‐mechanical continuum modeling

Rainfall weakens an earth slope and triggers mass movement. Relevant triggering mechanisms are complex and include reduction of capillary pressure due to increased saturation and frictional drag on the sediment induced by fluid flow. Physics‐based continuum models utilizing modern computational tools are useful for understanding the mechanisms of deformation in partially saturated slopes; however, they do not provide a scalar indicator called ‘factor of safety’ that measures the potential of a given slope for mass movement. In the present work, we employ sequential calculations consisting of a physics‐based finite element model that couples solid deformation with fluid flow to quantify the stress and deformation fields in a steep hillside slope subjected to rainfall infiltration. This is followed by a limit‐equilibrium calculation based on the method of slices that evaluates the desired factor of safety. The field condition investigated is similar to the steep experimental catchment CB1 near Coos Bay, Oregon, which failed as a large debris flow from heavy rainfall. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydrogeochemical balance of forest umbrisol profiles (‘Sierra de Gata’, central western Spain)

Three techniques for obtaining soil water solutions (gravitational and matrical waters extracted using both in situ tension lysimeters and in vitro pressure chambers) and their later chemical analysis were performed in order to know the evolution of the soil‐solution composition when water moves down through the soil, from the Ah soil horizon to the BwC‐ or C‐horizons of forest soils located in western Spain. Additionally, ion concentrations and water volumes of input waters to soil (canopy washout) and exported waters (drainage solutions from C‐horizons) were determined to establish the net balance of solutes in order to determine the rates of leaching or retention of ions. A generalized process of sorption or retention of most components (even Cl^?) was observed, from the soil surface to the C‐horizon, in both gravitational and matrical waters, with H₄SiO₄, Mn²⁺, Na⁺, and SO₄^2? being the net exported components from the soil through the groundwater. These results enhance the role of the recycling effect in these forest soils. The net percentages of elements retained in these forest soils, considering the inputs and the outputs balance, were 68% K⁺, 85% Ca²⁺, 58% Mg²⁺, 7% Al³⁺, 5% Fe³⁺, 34% Zn²⁺, 57% Cl^?, and 20% NO₃^?, and about 75% of dissolved organic carbon was mineralized. Copyright © 2007 John Wiley & Sons, Ltd.     

Numerical study of soil heterogeneity effects on contaminant transport in unsaturated soil (model development and validation)

The movement of chemicals through soil to groundwater is a major cause of degradation of water resources. In many cases, serious human and stock health implications are associated with this form of pollution. The study of the effects of different factors involved in transport phenomena can provide valuable information to find the best remediation approaches. Numerical models are increasingly being used for predicting or analyzing solute transport processes in soils and groundwater. This article presents the development of a stochastic finite element model for the simulation of contaminant transport through soils with the main focus being on the incorporation of the effects of soil heterogeneity in the model. The governing equations of contaminant transport are presented. The mathematical framework and the numerical implementation of the model are described. The comparison of the results obtained from the developed stochastic model with those obtained from a deterministic method and some experimental results shows that the stochastic model is capable of predicting the transport of solutes in unsaturated soil with higher accuracy than deterministic one. The importance of the consideration of the effects of soil heterogeneity on contaminant fate is highlighted through a sensitivity analysis regarding the variance of saturated hydraulic conductivity as an index of soil heterogeneity. Copyright © 2011 John Wiley & Sons, Ltd.     

Using a H∞ filter assimilation procedure to estimate root zone soil water content

Root zone soil water content impacts plant water availability, land energy and water balances. Because of unknown hydrological model error, observation errors and the statistical characteristics of the errors, the widely used Kalman filter (KF) and its extensions are challenged to retrieve the root zone soil water content using the surface soil water content. If the soil hydraulic parameters are poorly estimated, the KF and its extensions fail to accurately estimate the root zone soil water. The H‐infinity filter (HF) represents a robust version of the KF. The HF is widely used in data assimilation and is superior to the KF, especially when the performance of the model is not well understood. The objective of this study is to study the impact of uncertain soil hydraulic parameters, initial soil moisture content and observation period on the ability of HF assimilation to predict in situ soil water content. In this article, we study seven cases. The results show that the soil hydraulic parameters hold a critical role in the course of assimilation. When the soil hydraulic parameters are poorly estimated, an accurate estimation of root soil water content cannot be retrieved by the HF assimilation approach. When the estimated soil hydraulic parameters are similar to actual values, the soil water content at various depths can be accurately retrieved by the HF assimilation. The HF assimilation is not very sensitive to the initial soil water content, and the impact of the initial soil water content on the assimilation scheme can be eliminated after about 5–7 days. The observation interval is important for soil water profile distribution retrieval with the HF, and the shorter the observation interval, the shorter the time required to achieve actual soil water content. However, the retrieval results are not very accurate at a depth of 100 cm. Also it is complex to determine the weighting coefficient and the error attenuation parameter in the HF assimilation. In this article, the trial‐and‐error method was used to determine the weighting coefficient and the error attenuation parameter. After the first establishment of limited range of the parameters, ‘the best parameter set’ was selected from the range of values. For the soil conditions investigated, the HF assimilation results are better than the open‐loop results. Copyright © 2010 John Wiley & Sons, Ltd.     

The response of CO2 flux to rain pulses at a saline desert

As the substantial component of the ecosystem respiration, soil CO₂ flux is strongly influenced by infrequent and unpredictable precipitation in arid region. In the current study, we investigated the response of soil CO₂ flux to rain pulses at a saline desert in western China. Soil CO₂ flux was measured continuously during the whole growing season of 2009 at six sites. We found that there were remarkable changes in amplitude or diurnal patterns of soil CO₂ flux induced by rainfall events: from bimodal before rain to a single peak after that. Further analysis indicated that there is a significant linear relationship (P < 0.001) between soil CO₂ flux and soil temperature (T_soil). However, a hysteresis between the waveform of diurnal course of CO₂ flux and T_soil was observed: with soil CO₂ flux always peaked earlier than T_soil. Furthermore, a double exponential decay function was fitted to the soil CO₂ flux after rainfall, and total carbon (C) releases were estimated by numerical integration for rainfall events. The relative enhancement and total C release, in association with the rain pulses, was linearly related to the amount of precipitation. According to the size and frequency of rainfall events, the total amount of C release induced by rain pulses was computed as much as 7.88 g C·m^–2 in 2009, equivalent to 10.25% of gross primary production. These results indicated that rain pulses played a significant role in the carbon budget of this saline desert ecosystem, and the size of them was a good indicator of rain‐induced flux enhancement. Copyright © 2012 John Wiley & Sons, Ltd.