西藏自治区乃东县劣布铜矿综合地质特征

文章介绍区域地质背景、矿区地物化特征，对成矿时代、流体包裹体特征进行初步研究，并指出找矿远景，希望对矿区的矿产勘查具有借鉴和指导意义。     

CMIP5模式对东太平洋ITCZ偶极子模态模拟能力的评估

本研究利用第五次国际间耦合模式比较计划(Coupled Model Intercomparison Project phase 5, CMIP5)中的24个模式的工业革命前控制试验(Pre-industrial Control, picontrol)模拟结果, 结合观测资料, 评估了24个CMIP5 模式对东太平洋热带辐合带偶极子(Eastern Pacific ITCZ dipole, EPID)降水模态的模拟能力, 并建立了其与模式对热带太平洋气候态模拟之间的联系。结果表明: 1) 绝大多数模式在北半球春季(2—4月)对EPID模态模拟能力较差, 主要原因在于CMIP5模式对热带辐合带(Intertropical Convergence Zone, ITCZ)的模拟偏差, 其中模拟效果较差的模式在2—4月的气候态降水分布在赤道以南, 且降水普遍偏强; 2) 对各模式的EPID模态选取的季节按照技巧评分最高进行调整后, 大部分模式能较好地模拟出EPID模态的空间分布特点, 技巧评分在0.6以上, 其中模拟效果好的模式(技巧评分大于0.7)中EPID模态出现的月份同时在中东太平洋气候态表现出“双ITCZ”特征, 且多模式集合结果的模拟误差小于绝大多数模式。     

地基微波辐射计探测在黄河上游人工增雨中的应用

利用2003、2004年夏秋季在青海省河南县的地基双频段微波辐射计连续观测资料,在实施系统探测实验以进行辐射亮温值(TB(23.87),TB(31.65))与大气汽态总水汽含量(Q)和云中积分液态水含量(L)值反演处理的基础上,分析了黄河上游河曲地区的云水特征,并进行了降水预测及人工增雨作业指标的探讨。结果表明:在黄河上游河曲地区,7—9月纯晴天无云天气条件下,L值基本为0,表明了统计回归反演的显著性。多云条件下Q值和L值分别在3.76~4.75g·cm-2、227.34~859.42g·m-2的范围内。可降水云天气,Q值在5.23~8.65g·cm-2间,L值在421.18~1016.37g·m-2的范围内;积雨云个例分析表明,在降雨开始前近5小时的降雨酝酿期内,Q及L的增加有明显的波动,但在对流云出现并发展时,Q和L总是急剧上升,在降雨前达到一峰值;由河南站和西安站的Q、L值比较差异可以看出,Q、L值受水汽输送、地形等因素的影响,黄河上游河曲地区的人工增雨潜力有显著的优势;所计算出的降水预测阈值,可作为该地区人工增雨作业指标的参考。     

材料状态对干砂小应变特性的影响

利用注能虚拟质量(EIVM)共振柱系统进行了干砂小应变特性试验,研究了有效平均正应力、土样密度、剪应变幅值以及荷载往复次数对剪切模量和阻尼比的影响。试验结果表明,剪切模量随有效平均正应力与土样密度的增加而增加,而阻尼比的变化规律则与之相反,并且有效平均正应力对干砂小应变特性的影响程度比土样密度的影响程度大得多;随着剪应变的增加,剪切模量越来越小,而阻尼比越来越大;荷载往复次数对剪切模量基本没有影响,而对阻尼比有较大影响。     

3DCM的几何与纹理数据一体化管理方法研究

建设三维城市模型(3DCM)首先需要建立场景所需的海量地形地物空间数据库,从而有效组织三维实体数据来满足大范围高精度场景实时绘制的要求.该文提出一种以三维空间实体为单位的基于关系数据库(RDBMS)的3DCM的几何与纹理数据一体化管理方法.采用Direct3D 9.O三维开发平台、C#编程语言实现了3DCM空间数据库模型管理系统.实验证明:该系统在效率、安全、网络多用户访问方面都优于传统基于文件的管理模式,满足了大范围3DCM海量模型数据管理与应用需求.     

Exploring the sensitivity of coastal inundation modelling to DEM vertical error

As sea level is projected to rise throughout the twenty-first century due to climate change, there is a need to ensure that sea level rise (SLR) models accurately and defensibly represent future flood inundation levels to allow for effective coastal zone management. Digital elevation models (DEMs) are integral to SLR modelling, but are subject to error, including in their vertical resolution. Error in DEMs leads to uncertainty in the output of SLR inundation models, which if not considered, may result in poor coastal management decisions. However, DEM error is not usually described in detail by DEM suppliers; commonly only the RMSE is reported. This research explores the impact of stated vertical error in delineating zones of inundation in two locations along the Devon, United Kingdom, coastline (Exe and Otter Estuaries). We explore the consequences of needing to make assumptions about the distribution of error in the absence of detailed error data using a 1 m, publically available composite DEM with a maximum RMSE of 0.15 m, typical of recent LiDAR-derived DEMs. We compare uncertainty using two methods (i) the NOAA inundation uncertainty mapping method which assumes a normal distribution of error and (ii) a hydrologically correct bathtub method where the DEM is uniformly perturbed between the upper and lower bounds of a 95% linear error in 500 Monte Carlo Simulations (HBM+MCS). The NOAA method produced a broader zone of uncertainty (an increase of 134.9% on the HBM+MCS method), which is particularly evident in the flatter topography of the upper estuaries. The HBM+MCS method generates a narrower band of uncertainty for these flatter areas, but very similar extents where shorelines are steeper. The differences in inundation extents produced by the methods relate to a number of underpinning assumptions, and particularly, how the stated RMSE is interpreted and used to represent error in a practical sense. Unlike the NOAA method, the HBM+MCS model is computationally intensive, depending on the areas under consideration and the number of iterations. We therefore used the HBM+ MCS method to derive a regression relationship between elevation and inundation probability for the Exe Estuary. We then apply this to the adjacent Otter Estuary and show that it can defensibly reproduce zones of inundation uncertainty, avoiding the computationally intensive step of the HBM+MCS. The equation-derived zone of uncertainty was 112.1% larger than the HBM+MCS method, compared to the NOAA method which produced an uncertain area 423.9% larger. Each approach has advantages and disadvantages and requires value judgements to be made. Their use underscores the need for transparency in assumptions and communications of outputs. We urge DEM publishers to move beyond provision of a generalised RMSE and provide more detailed estimates of spatial error and complete metadata, including locations of ground control points and associated land cover.     

遥感蚀变信息检测中背景与干扰问题研究

在不同自然景观区的遥感蚀变信息检测中,背景与干扰是2个复杂而又容易混淆的研究对象。本文结合光谱混合模型理论与随机变量概率分布相关理论,深入分析了遥感数据的光谱空间几何结构特征(重点剖析二维散点图),系统研究了背景与干扰的关系、复杂度以及干扰地物类型的划分等问题。这些问题的探讨为遥感蚀变信息检测的最佳方案设计和蚀变信息潜在性评价与准确提取提供了技术思路。     

Seasonal change in body length of important small copepods and relationship with environmental factors in Jiaozhou Bay,China

Differences among species in prosome length and in species’ response to environmental factors do exist. Therefore, it is useful to examine prosome length for different copepod species in variable environments. Seasonal variations in prosome length of four small copepods and their copepodite stages in the Jiaozhou Bay were compared and the relative influence of temperature, salinity, and chlorophyll concentration were examined. Two peaks were found in the mean prosome length of Paracalanus parvus (in early winter and May). For Acartia bifilosa, the maximum values of all copepodites occurred mainly from February to April, and decreased to the bottom in July. Prosome length of Acartia pacifica peaked when it first appeared in June, then reached to the minimum in July. Parvocalanus crassirostris only appeared from late summer to autumn and the mean prosome length showed no clear changes. Correlations of adult prosome length with environmental factors were evaluated. For the four species, temperature was negatively correlated to prosome length except for P. crassirostris. But the different species varied markedly in their responds to temperature. A. bifilosa showed a more definite trend of size variation with temperature than P. parvus and A. pacifica. Correlations of prosome length with salinity were significantly positive for almost all the small copepods. The relationship between chlorophyll concentration and prosome length was complicated for these copepods, but for P. parvus, chlorophyll concentration was also an important affecting factor. Furthermore, investigation needs to be done on food quality for some copepod. These results are essential to estimate the biomass and the production, and to understand these small copepods’ population dynamics in this human-affected bay.