Chemical aspects of iron oxide coagulation in water: Laboratory studies and implications for natural systems

Initial coagulation rates of colloidal hematite (-Fe₂O₃) particles (diameter less than 0.1 µm) were measured experimentally in well-defined laboratory systems at constant temperature. The relative stability ratio,W, was obtained at various ionic strengths in NaCl medium and at pH values in the range from 3 to 12. ExperimentalW values ranged from 1 to 10⁴ in various systems. The results delineate the roles ofspecific andgeneralized coagulation mechanisms for iron oxides. Among the specifically-interacting species (G _ads ⁰ >G _coul ⁰ ) studied were phosphate, monomeric organic acids of various structures, and polymeric organic acids. The critical coagulation-restabilization concentrations of specifically-interacting anions (from 10^–7 to 10^–4 molar) can be compared with the general effects of non-specific electrolyte coagulants (10^–3 to 10^–1 molar). The laboratory results are interpreted with the help of a Surface Complex Formation/Diffuse Layer Model (SCF/DLM) which describes variations of interfacial charge and potential resulting from variations of coagulating species in solution. Comparison of these laboratory experiments with observations on iron behavior in estuarine and lake waters aids in understanding iron removal mechanisms and coagulation time scales in natural systems.     

Interactive effects of the type of milling media and CuSO4 addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

预应力锚索在公路高陡边坡加固整治工程中的应用

预应力锚索锚固技术以其结构合理、工艺灵巧、适应性广、施工速度快、造价低等优势，目前已广泛应用于各工程领域。在桂（林）—柳（州）高速公路高边坡加固工程中采用了该项技术，经过近1年的运转表明，效果良好。对该项工程作了详细讨论，介绍了边坡的地质条件、稳定性分析和设计参数的选取，总结了施工中锚索的造孔、下索、注浆、张拉锁定等设计及施工要点。     

复合土钉墙支护技术在某大型软土基坑围护中的应用

根据拟建建筑基坑的工程地质条件、周边环境条件、基坑开挖深度等特点综合考虑，对基坑分段采用超前微型桩支护加土钉墙、放坡加土钉墙2种复合支护方案。实践证明，该工程所采用的多种复合式支护实施方案，技术安全可靠，经济合理。     

广州科学城保利林语山庄高边坡支护工程的实践

主要介绍了广州科学城保利林语山庄高边坡支护设计方案与施工方法。支护方案综合采用了锚索、锚杆、抗滑桩、钢管桩、格构梁及挡土墙等多种支护方法，有效地提高了边坡的稳定性。应用有限元方法来验证设计方案的合理性，模拟结果与工程实践基本吻合。     

大变形有限元法分析边坡稳定性

边坡稳定性分析的重要任务是确定边坡潜在滑面的位置及相应的安全系数,鉴于坡体位移可在现场监测中直接得到,提出边坡潜在滑面确定的位移判据,采用大变形有限元首先计算出边坡的位移场,然后在开挖面的不同高度作塑性区内的水平位移参考线,依次连接参考线上的位移突变点即得到边坡失稳的潜在滑面位置,分析滑面上的应力以及岩体抗剪强度即得到边坡的整体安全系数。     

双坡面临空岩质边坡滑动破坏模式下的稳定性分析

多数岩质边坡稳定性分析已基本解决了常走向单坡面临空的边坡平面滑动问题。然而,在路堑边坡工程和自然边坡中有很多边坡坡面并不是平面,它包含多个坡面。多坡面边坡包含两个或多个不同走向的坡面。多坡面边坡几何特征不同于单坡面边坡,所以滑动条件也不一样。在赤平投影图上,多坡面的滑动包络线是组成边坡的每个坡面单独投影包络线的组合。为了探讨方便,只讨论了双坡面临空岩质边坡的滑动破坏模式,并将其分为双坡面临空下的平面破坏和楔形体破坏。在赤平投影图上,双坡面滑动区域定义为双坡面边坡滑动包络图中两侧坡面的真倾线之间的面积。如果有一两个节理面真倾向线落在滑动区内,滑动破坏才可能发生。     

加固含水平软弱层高陡边坡预应力锚索倾角的取值范围

用直线和曲线滑面两种模型，模拟预应力锚索加固含有水平软弱层的高陡边坡的潜在滑动面，通过对锚索加固的力学机理分析来阐述预应力在滑动面主滑方向上产生分力的原因。从锚索受力角度上对锚索倾角的取值范围进行探讨，结合实际造孔过程有不同程度的孔斜或弯曲以及获取较好的锚固灌浆效果，就仰角锚固和俯角锚固两种锚固条件分别得出锚索倾角的取值范围，并以此来判定锚索的预应力是否会在滑动面走向方向上产生不利于坡体稳定的下滑力。