21世纪全球油气资源形势和海上多波地震技术展望

首先综述了现在对全球油气资源量的估计和对 2 1世纪全球油气资源发展形势的预测。表明2 1世纪全球油气资源不会枯竭。未来 10 0年 ,不是世界上有没有油气可供开采 ,而是环境允不允许和在多大程度上允许以及用多大的成本开采的问题。在所有情况下 ,技术进步都起着关键的作用。然后从油气勘探角度对技术进步中的一项主要技术———多分量地震的历史、现状和发展作了评述 ,并结合国家 86 3项目关于海上多波地震技术研究的状况提出了进一步实施的设想     

河北省数字地震台网子台地动噪声分析

通过对河北省数字遥测地震台网子台地动噪声分析,各个子台的台址环境和观测仪器的性能基本优良,能够适应宽频带地震观测要求。由于子台受当地经济发展、城市规模扩大以及交通建设等影响,部分台址观测条件受到影响。可以有针对性地对部分台站进行环境改造,为地震监测预报创造更好条件。     

模拟磁带记录仪MCD—3和解调器CBY—2的改装及其在工程地震上的应用

本文主要介绍模拟碰带记录地震仪MCD—3及其解调器CBY—2系列的一种行之有效的改进法。该方案配以IBM—PC/XT计算机硬软件,能实现宽频多道数字采集与处理。改装结果在工程地震方面获得广泛的应用,取得明显的经济效果。     

Deep reflection seismic imaging of the internal zone of the South Armorican Hercynian belt (western France) (ARMOR 2/Géofrance 3D Program)

We present results and interpretation of a 72 km long deep seismic reflection profile acquired across the internal zone of the Hercynian belt of South Brittany. The profile is of excellent quality, most of the crust being highly reflective. The “ARMOR 2 South” profile, is correlated with the “ARMOR 2 North” profile that was published in 2003. Correlation of the main subsurface reflections with surface geological and structural data provides important information about the crustal structure that resulted from thickening during Late Devonian and regional-scale extension during Late Carboniferous. In particular, seismics image shows a very high reflectivity zone, lying flat over more than 40 km at about 10–12 km depth. This zone is interpreted as a major zone of ductile crustal thinning.     

Morphology,sedimentary infill and depositional environments of the Early Quaternary North Sea Basin (56°–62°N)

The North Sea Basin has been subsiding during the Quaternary and contains hundreds of metres of fill. Seismic surveys (170 000 km²) provide new evidence on Early Quaternary sedimentation, from about 2.75 Ma to around the Brunhes-Matuyama boundary (0.78 Ma). We present an informal seismic stratigraphy for the Early Quaternary of the North Sea, and calculate sediment volumes for major units. Early Quaternary sediment thickness is > 1000 m in the northern basin and >700 m in the central basin (total about 40 000 km³). Northern North Sea basin-fill comprises several clinoform units, prograding westward over 60 000 km². Architecture of the central basin also comprises clinoforms, building from the southeast. To the west, an acoustically layered and mounded unit (Unit Z) was deposited. Remaining accommodation space was filled with fine-grained sediments of two Central Basin units. Above these units, an Upper Regional Unconformity-equivalent (URU) records a conformable surface with flat-lying units that indicate stronger direct glacial influence than on the sediments below. On the North Sea Plateau north of 59°N, the Upper Regional Unconformity (URU) is defined by a shift from westward to eastward dipping seismic reflectors, recording a major change in sedimentation, with the Shetland Platform becoming a significant source. A model of Early Quaternary sediment delivery to the North Sea shows sources from the Scandinavian ice sheet and major European rivers. Clinoforms prograding west in the northern North Sea Basin, representing glacigenic debris flows, indicate an ice sheet on the western Scandinavian margin. In the central basin, sediments are generally fine-grained, suggesting a distal fluvial or glacifluvial origin from European rivers. Ploughmarks also demonstrate that icebergs, derived from an ice sheet to the north, drifted into the central North Sea Basin. By contrast, sediments and glacial landforms above the URU provide evidence for the later presence of a grounded ice sheet.     

煤田三维地震叠前深度偏移技术及其应用

三维地震叠前深度偏移可实现反射点的正确空间归位和真正的共反射点叠加,减小菲涅尔带的影响范围,大大提高地震资料的分辨率。论述了三维地震叠前深度偏移的成像原理和关键技术,并应用于实际地震资料的处理中。结果显示,小断点显示较叠前时间偏移剖面更为清晰,提高了煤田三维地震探测细微构造的能力,取得了较好的地质效果。      

Towards quantitative evaluation of gas injection using time‐lapse seismic data

Of particular concern in the monitoring of gas injection for the purposes of storage, disposal or improved oil recovery is the exact spatial distribution of the gas volumes in the subsurface. In principle this requirement is addressed by the use of 4D seismic data, although it is recognized that the seismic response still largely provides a qualitative estimate of moved subsurface fluids. Exact quantitative evaluation of fluid distributions and associated saturations remains a challenge to be solved. Here, an attempt has been made to produce mapped quantitative estimates of the gas volume injected into a clastic reservoir. Despite good results using three accurately repeated seismic surveys, time‐delay and amplitude attributes reveal fine‐scale differences though large‐scale agreement in the estimated fluid movement. These differences indicate disparities in the nature of the two attributes themselves, which can be explained by several possible causes. Of most impact are the effects of processing and migration, wave interference effects and noise from non‐repeatability of the seismic surveys. This subject highlights the need for a more careful consideration in 4D acquisition, amplitude processing and use of true amplitude preserving attributes in quantitative interpretation.     

Repeatability analysis of land time‐lapse seismic data: CO2CRC Otway pilot project case study

Time‐lapse seismics is the methodology of choice for remotely monitoring changes in oil/gas reservoir depletion, reservoir stimulation or CO₂ sequestration, due to good sensitivity and resolving power at depths up to several kilometres. This method is now routinely applied offshore, however, the use of time‐lapse methodology onshore is relatively rare. The main reason for this is the relatively high cost of commercial seismic acquisition on land. A widespread belief of a relatively poor repeatability of land seismic data prevents rapid growth in the number of land time‐lapse surveys. Considering that CO₂ sequestration on land is becoming a necessity, there is a great need to evaluate the feasibility of time‐lapse seismics for monitoring. Therefore, an understanding of the factors influencing repeatability of land seismics and evaluating limitations of the method is crucially important for its application in many CO₂ sequestration projects. We analyse several repeated 2D and 3D surveys acquired within the Otway CO₂ sequestration pilot project (operated by the Cooperative Research Centre for Greenhouse Technologies, CO2CRC) in Australia, in order to determine the principal limitations of land time‐lapse seismic repeatability and investigate the influence of the main factors affecting it. Our findings are that the intrinsic signal‐to‐noise ratio (S/N, signal to coherent and background noise levels) and the normalized‐root‐mean‐square (NRMS) difference are controlled by the source strength and source type. However, the post‐stack S/N ratio and corresponding NRMS residuals are controlled mainly by the data fold. For very high‐fold data, the source strength and source type are less critical.     

浅层地震勘探在滇西第三系盆地探查铀矿床的应用及效果

通过对方法可行性试验,确认在滇西第三系盆地中应用浅层地震反射波方法,探查100—400m深度的基底形态、构造及对盖层分层的有效性。试验采用McSEIS-1500地震仪,选择合适的激发条件,根据工作区有效波和干扰波的特点,研究并采取了有效的野外技术措施,达到提高S/N比,突出有效波的目的。     

Sediment velocity estimation using iterative 3-D migrations of short offset seismic reflection data in deep water

In deep ocean settings where water depth greatly exceeds the source-to-receiver length, the geometry is insufficient for accurate determinations of velocity from reflection-moveout. However, velocities are crucial for estimates of physical properties and image processing. Focusing analyses with conventional post-stack two-dimensional migration improves images, but does not produce geologically meaningful velocities except in the special case of a two-dimensional earth. For the more general case of the three-dimensional earth there is no a priori method to determine the degree of geometrical complexity. We present a technique using a short-offset three-dimensional (3-D) data set over the 5 km deep trench west of the Lesser Antilles. These data illustrate highly sensitive post-stack 3-D focusing analyses (± 20 m s^–1 interval velocities), and the relationship of these seismically derived velocities to rock velocities. In our Barbados example we were able to establish the presence of a widespread 80-160 m thick low-velocity zone at and above the main low-angle fault. This observation suggests the water-rich décollement leaks water into the overlying sections. Also evident is a low-velocity section associated with turbidite sands. These results are confirmed with sparse logging data and well samples. Deep-water short offset 3-D experiments provide a potentially effective approach for velocity estimation, replacing the operational complexity of long-offsets with simpler short-offset techniques. In areas of structural complications and abundant diffracted energy, it is a surprisingly accurate method, utilizing the high fidelity 3-D wavefield and the information carried in zero-offset diffraction ellipsoids. The velocity used to properly collapse a diffraction ellipsoid is explicitly the velocity of propagation in the media since the travel path is known exactly. Thus, the derived velocities should closely represent rock velocities, unlike the 2-D case where the propagation geometry is not known.