Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.     

台湾海峡及其西边地区正常地震动态及危险性特征

本文从地震的时，空分布特征，区域应力场动态，能量释放方式，ｂ值及震群特征６个方面研究了台湾海峡及其西边地区地震活动的正常动态及异常特征。结果表明，具有前兆意义的变化模式表现为区域地震活动在时间，空间及功能方面的有序性变化，即：（ａ）地震空间分布由分散转为集中，形成条带或空区；（ｂ）断裂活动由多组转为单一，应力场趋向一致；（display status     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

中国花鲈细胞色素b基因片段的序列研究(英文)

参考鳗鲡等鱼类线粒体 DNA序列进行了中国花鲈线粒体 DNA细胞色素 b基因片断的引物设计、PCR扩增及其序列测定。得到中国花鲈的碱基序列为 4 10 bp,其 A、T、G、C含量分别为 10 1bp(2 4 .6 3% )、112 bp(2 7.32 % )、72 bp(17.56 % )、12 5bp(30 .4 9% ) ,与鳗鲡等其他鱼类相同基因片断序列碱基含量相似。     

Application of the first internal transcribed spacer(ITS-1) of ribosomal DNA as a molecular marker to population analysis in farrer''s scallop Chlamys farreri

Sequence variation of the first internal transcribed spacer of ribosomal DNA （ ITS - 1 ） was examined and its application to the study of genetic variation was explored in four populations of farter＇ s scallop Chlamys farreri. ITS - 1 fragments, with a length of about 300 bp,of 78 individuals collected from Dalian, Qingdao, Yantai in China and Korea respectively were amplified via PCR, cloned and sequenced. Intra-genomic variation was examined by sequencing several clones of single individuals. Alignment and polymorphism analysis detected 44 haplotypes and 50 polymorphic sites which consist of 30 substitutions and 20 indels, indicating a high level of polymorphisms. Sequence analysis also showed a very low level of intra-individual variation. All these features validated the feasibility of application of ITS - 1 fragment to population analysis. Polymorphism analysis showed that the Korea sample has the richest genetic variation, followed by Yantai and Qingdao samples. AMOVA （analysis of molecular variance） showed that the majority （96.26%） of genetic variation was distributed within populations and 3.74% resulted from among populations, but with P 〈 0.05 （ = 0.042）, indicating that the populations in this study have significant divergence. This output was basically concordant with the result arising from RAPD data and different from that from mitochondrial 16S rDNA sequence data. Discussion on this inconsistency was made accordingly.     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

西沙礁序列的磁性地层学研究

利用西沙群岛西琛一井３３０ｍ以上井段的１４９块岩心标本，用美国２－Ｇ型超导磁力仪进行了古地磁测定，获得了一个从更新世至中新世晚期包括布容，松山，高斯和吉尔伯特四个极性时及若干亚极性的磁性地层柱，为礁序列的划分对比，提供了新的依据。     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。     

Southern Segment of the European Geotraverse — a wide-angle seismic refraction experiment in the Sardinia Channel

The Sardinia Channel dataset was collected as part of the European Geotraverse (EGT)—a 4000 km seismic refraction line running from Northern Norway to the Sahara, designed to investigate the structure of the lithosphere beneath Europe. Wideangle seismic data recorded by ocean bottom seismometers deployed in the Sardinia Channel as part of the Southern Segment of the EGT, together with gravity data, were used to constrain the final crustal model. In the centre of the Channel the crust is identified as thinned continental in nature, with a crystalline thickness of 10 km overlain by 4 km of sediments and 2.5 km of water in the most extended region. High velocities in the lower crust in the central region are thought to represent an area of underplating or intrusion by igneous material caused by extension related to the opening of the Tyrrhenian Sea. The crust overlies an anomalously low velocity upper mantle.