Fuzzy Fatigue Reliability Analysis of Offshore Platforms in Ice-Infested Waters

1 .IntroductionTheBohaiGulfisinfestedbyiceinthewholewinter,andoffshorestructuresthereexperiencenotonlywind ,waves ,currentsandearthquake ,butalsoiceloadswhicharecomplicatedbecauseofthedynamicinteractionbetweenicesheetsandstructures.Duanetal.( 2 0 0 0 )hadacomprehensivere viewofthelatestadvancesonice inducedvibration ,fatigueandfractureofoffshorestructures ,payingmuchattentiontothedifferencesinicebreakingmodeanddynamicsofstructuresindifferentice in festedwaters .Theypresentedcriticallythelates…     

Modeling bed-load transport of coarse sediments in the Great Bay Estuary, New Hampshire

Current, sea level and bed-load transport are investigated in the Lower Piscataqua River section of the Great Bay Estuary, New Hampshire, USA—a well-mixed and geometrically complex system with low freshwater input, having main channel tidal currents ranging between 0.5 and 2 m s⁻¹. Current and sea level forced by the M₂M₄M₆ tides at the estuarine mouth are simulated by a vertically averaged, non-linear, time-stepping finite element model. The hydrodynamic model uses a fixed boundary computational domain and accounts for flooding–drying of tidal flats by making use of a groundwater component. Inertia terms are neglected in comparison with pressure gradient and bottom friction terms, which is consistent with the observed principal dynamic balance for this section of the system. The accuracy of hydrodynamic predictions in the study area is demonstrated by comparison with four tidal elevation stations and two cross-section averaged current measurements. Simulated current is then used to model bed-load transport in the vicinity of a rapidly growing shoal located in the main channel of the lower system. Consisting of coarse sand and gravel, the shoal must be dredged every five to eight years. Two approaches are taken—an Eulerian parametric method in which nodal bed-load flux vectors are averaged over the tidal cycle and a Lagrangian particle tracking approach in which a finite number of sediment particles are released and tracked. Both methods yield pathways and accumulations in agreement with the observed shoal formation and the long-term rate of sediment accumulation in the shoal area.     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

The Nonlinear Wave Force on a Circular Cylinder in Shallow Water

Based on the 1st order cnoidal wave theory, the nonlinear wave diffraction around a circular cylinder in shallow water is studied in this paper. The equation of the wave surface around the cylinder is formulated and by using this formula the wave surface elevation on the cylinder surface can be obtained. In this paper, the formula for calculating the cnoidal wave force on a circular cylinder is also derived. For the wave conditions which are often encountered in practical engineering designs, the ratios of the nonlinear wave forces to the linear wave forces are calculated, and the results are plotted in this paper for design purposes. In order to verify the theoretical results, model tests are conducted. After comparing the test results with the theoretical ones, it is concluded that, in shallow water, for the case of T g / d~(1/2) > 8-10 and H / d > 0.3, the cnoidal wave theory should be used to calculate the wave action on a cylindrical pier.     

Rheological Properties and Incipient Motion of Cohesive Sediment in the Haihe Estuary of China

The Haihe cohesive sediment, which is typical in China, is studied systematically for its basic physical and incipientmotion properties. Following the requirements of dredging works in the Haihe Estuary, cohesive sediment samples weretaken from three locations. Laboratory experiments were conducted to determine the rheological properties of these sam-ples and to examine the incipient motion of the cohesive sediment. It is found that the cohesive sediment has an obviousyield stress τb, which increases with the mud density in a manner of an exponential function, and so does the viscosityparameter η. The cohesive sediment behaves like a Bingham fluid when its density is below 1.38 ～ 1.40 g/cm3, andwhen denser than these values, it may become a power-law fluid. The incipient motion experiment also revealed that theincipient velocity of the cohesive sediment increases with the density in an exponential manner. Therefore, the incipientmotion is primarily related to the density, which is different from the case for non-cohesive sediment in which the incipi-ent motion is correlated with the diameter of sand particles instead. The incipient motion occurs in two different ways de-pending on the concentration of mud in the bottom. For sufficiently fine particles and a concentration lower than1.20 g/cm3, the cohesive sediment appears as fluidized mud, and the incipient motion is in the form of instability of aninternal wave. For a higher concentration, the cohesive sediment appears as general quasi-solid-mud, and the incipientmotion can be described by a series of extended Shields curves each with a different porosity for newly deposited alluvial mud.     

Experimental study of reflection coefficient and wave forces acting on perforated caisson

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.     

Vertical variations of wave-induced radiation stress tensor

INTRODUcrIONThe concept of radiation stress was deve1oPed by tonguet--Higgins and Stewart (1964 ),who intreduced the definition of radiation stress as the excess mornentum due to the presence ofwaves, on the basis of time-averaged laws of Newtonian fluid mechanics and the assmption ofa unifOrm velocity distribution over depth. Subequently, the theory has been applied success-fully in the investigation of phenomena such as wave set-up and set--down (Bowen et al.,l968), longshore currents …     

Wave Loads and Protective Techniques of An On-Shore Wave Power Device

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec     

Effect of Berm Width and Elevation on Irregular Wave Run-Up

This paper discusses the effect of berm width and elevation of composite slope on irregular wave run-up. Based on the data obtained from model tests, the formula and distribution of irregular wave run-up on composite slope are derived. The changing of wind speed, width and elevation of the berm are considered comprehensively. The wave run-up with various exceedance probability can be es-timated utilizing the distribution curves of irregular wave run-up.     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.