大同盆地砷中毒病区沉积物中砷的吸附行为和影响因素分析

沉积物对砷的吸附-解吸作用是控制砷在地下水中的迁移和转化的决定性因素。对砷中毒重病区大同盆地山胡县沉积物中砷的吸附行为和影响因素研究结果表明,沉积物对砷的吸附符合Freundlich吸附等温模式,吸附量主要与沉积物颗粒大小、黏土矿物质量分数和类型、铁铝氧化物质量分数以及沉积物中As的质量分数有关,有机质质量分数对砷的吸附量影响需进一步深入研究。铝硅酸盐、铁铝氧化物质量分数较高且颗粒较细的黏土和亚黏土类沉积物对砷的吸附性较强;而铝硅酸盐、铁铝氧化物质量分数较低且颗粒较粗的细砂和粉砂类沉积物对砷的吸附性较差,其所处的含水层也是形成高砷地下水的主要含水层。pH值为5．5～8．0时,砷的吸附量最大。大同盆地高砷地下水pH条件非常不利于沉积物中砷的吸附,易形成高砷地下水。该区地下水10℃左右的温度条件非常有利于沉积物对砷的吸附,但由于影响因素较多,且地下水的温度在不同季节会发生一定的变化,其产生的影响还有待进一步研究。     

八面河地区原油、烃源岩中甾类化合物的分布特征及其应用

对渤海湾盆地八面河地区31个分别形成于还原性咸化水体和淡水环境的页岩和泥岩样、20个油样中甾类化合物进行了剖析。结果表明该区烃源岩、原油中的甾类化合物异常丰富，主要包括C27－29规则甾烷、C28－304－甲基甾烷、甲藻甾烷以及芳香甾类；不同层段烃源岩中甾类化合物的分布各具特色，发育于牛庄洼陷南斜坡咸化水体的富藻类沙四段页岩富含4－甲基甾烷及甲藻甾烷，形成于淡水环境的沙三段泥岩中甲藻甾烷不太发育。烃源岩、原油中规则甾烷的分布型式明显有别于甲基甾烷，指示两类化合物可能来源于不同的藻类属种。甾类化合物的分布特征受控于古环境、生物先质种类及热成熟度等多种因素。不同层段甾类化合物的特征性分布使其成为该区油源岩确认的关键指标。结果还表明，甲基甾烷在油源岩识别中比规则甾烷具有更好的应用效果。依据甾类化合物，可判断埋深超过2700m的Es4烃源岩与原油具有较好的相关性，发育于牛洼洼陷南斜坡的未熟－低熟特殊烃源岩－富藻类页岩与原油没有可比性，该结论是对近期油源调查结果的进一步确认。     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.     

三峡库区万州区山湾堰塘沉积物特征及演化历史

万州特有的阶梯状地貌特征是万州地区河流地貌演化及水平地层特殊地质环境共同作用的结果,通过系统的野外地质调查、勘探和资料收集,结合2008年堰塘的湖中钻探,对该堰塘沉积物进行系统取样与分析,并进行了沉积物年龄与成分的测定.结果表明山湾陡崖的崩塌与阶地抬升及区域构造运动一致.绘制了山湾滑坡崩塌堆积物各期次沉积剖面,共分为10个崩塌旋回.结合沉积物测年,研究了山湾滑坡体沉积物沉积速率,得出了山湾危岩陡崖后退速率为0.31~0.37 m/ka.      

多金属结核的沉积物地球化学场

远洋沉积物是多金属结核赖以生长的场所，本文系统地研究了沉积物中主要成矿元素水成组分在不同地球化学场和不同沉积阶段的地球化学特征，以及水成组分的含量比与成矿作用的相互关系。研究表明，Ｍｎ、Ｆｅ、Ｃｏ、Ｎｉ、Ｃｕ都是一些比较活泼的元素，它们共处于多金属结核、沉积物和大洋水的统一体系中，当结核形成时，Ｍｎ、Ｆｅ、Ｎｉ、Ｃｕ在结核与沉积物中的含量呈负相关，而Ｃｏ含量呈正相关。研究区东部结核以富含Ｍｎ、Ｎｉ、Ｃｕ贫Ｆｅ、Ｃｏ为特征，其伴生沉积物相对贫Ｍｎ、Ｎｉ、Ｃｕ、Ｃｏ，而富Ｆｅ，可称之为贫化的地球化学场。研究区西部结核富含Ｆｅ、Ｃｏ而贫Ｍｎ、Ｎｉ、Ｃｕ，其伴生沉积物则相应贫Ｆｅ，而富Ｍｎ、Ｎｉ、Ｃｕ、和Ｃｏ，可称之为富化的地球化学场。可以看出，贫化的沉积物地球化学场，恰恰是寻找富矿结核的最佳场所。早中新世以来的沉积物，根据水成组分的含量或含量比，也可相应于结核的形成分为三大沉积阶段，其中的第Ⅱ阶段具有贫化的地球化学特征，是多金属结核形成的最有利时期     

Subbottom acoustic and sedimentary records of past surface water–groundwater exchange through sinkhole lakes in south Georgia,U.S.A

Lake Balboa is a deep sinkhole lake in south Georgia. Subbottom acoustic profiling and long sediment cores reveal four stratigraphic units within >20 m of lacustrine fill above acoustically stratified and faulted Miocene/Pliocene overburden and basement Eocene limestone which hosts the Floridan Aquifer system (FAS). Fill consists of thin, rhythmically bedded, peaty sediments (Unit I), indicative of slow sedimentation in a shallow swamp until 13,110–12,680 cal BP, a mix of desiccated and over-consolidated clay and silty sand (Unit II) implying periodic subaerial exposure of the lake bed until 9470–9025 cal BP, and gyttja associated with a rapid 8 m rise in water level by 9120–9020 cal BP (Unit III), as well as an additional rise of 10 m to modern lake levels (Unit IV). Accumulation of nearly 4.5 m of low permeability gyttja, and higher lake levels have fundamentally changed exchange between surface water and groundwater, reducing by 40% or more the rate of vertical leakage to the FAS and increasing shallow aquifer discharge to the lake.     

一些有机物对Ph、Zn、Cu迁移与沉积作用的实验研究

根据一些有机物在成矿溶液中存在的可能性,作者相继就中性、酸性与碱性氨基酸,以及酒石酸在铅、锌、铜迁移与沉积过程中的作用,进行了模拟实验研究。结果表明,在从９０～２１０℃范围内,酸性氨基酸在热卤水中的存在,比中性和碱性氨基酸更有利于铅、锌、铜的活化、迁移。而酒石酸在热卤水中的存在,只在９０℃或更低时,才是铅、锌等金属活化、迁移的最佳温度条件。且无论哪种有机物在热卤水中的存在,随作用时间及温度的变化,不同金属的活化、迁移明显不同。这表明,金属与氨基酸或其它有机物形成的易溶络合物,其稳定性不仅与金属、氨基酸等有机物的种类有关,而且还受温度的显著影响。     

扎河坝蛇绿混杂岩内富铌玄武(安山)岩的地球化学特征及其地质意义

在新疆北部东准噶尔的扎河坝蛇绿混杂岩中发现的富铌玄武（安山）岩,其SiO₂含量介于46.71%~57.65%,TiO₂含量为1.00%~1.76%,与太古代绿岩带内富铌玄武（安山）岩相似,Na₂O含量为3.86%~6.64%,P₂O₅为0.34%~0.82%,明显高于太古代绿岩带富铌玄武（安山）岩。扎河坝富铌玄武岩铌含量介于7.22×10^-6~21.91×10^-6之间,大于7×10^-6,与典型的富铌玄武岩相同。该岩石轻重稀土元素分馏较明显,其分布模式为无明显铕至弱负铕异常的右倾曲线。尽管铌的绝对含量较高,但由于钍和轻稀土元素更加富集,在微量元素蛛网图中扎河坝富铌玄武（安山）岩仍表现为铌的明显亏损,同时高场强元素Zr、Hf及Ti也表现出一定程度的亏损。微量元素地球化学特征显示,扎河坝蛇绿混杂岩内富铌玄武（安山）岩形成于古亚洲洋的洋内弧,它是被埃达克质岩浆交代的地幔楔橄榄岩部分熔融的产物,同时大洋沉积物及俯冲板块释放的流体对成岩作用也有一定的贡献。富铌玄武（安山）岩作为弧前增生楔定位在扎河坝蛇绿混杂岩体内,与早前报道的超高压变质岩共存表明,该蛇绿混杂岩体至少记录了两次性质不同的古亚洲洋洋壳俯冲,这更进一步证实新疆北部晚古生代新增陆壳是古亚洲洋多次俯冲作用的产物。     

沉积物物源定量识别的非线性规划模型——以东海陆架北部表层沉积物物源识别为例

依据“质量守衡”原理和沉积物物源难以穷尽的认识 ,提出了沉积物物源定量识别的非线性规划数学模型。利用该模型实现了东海陆架北部表层沉积物物源的定量计算 ,阐明了长江、黄河入海物质的大致分布特征。长江沉积物主要分布于 32°N以南、台湾暖流以西的海域 ,黄河沉积物主要分布于 32°N以北、台湾暖流以东的海域。长江、黄河两类沉积物的这种分布格局与本海域的流系分布相吻合。     

长江河口北槽河道悬沙絮团特性及其影响因素研究

利用多种先进室内外测量仪器进行河口现场观测和室内电镜扫描获得相关资料,对长江河口北槽河道细颗粒泥沙絮凝的水沙环境、絮团的微观形态结构、絮团的粒径组成及其主要影响因素进行了综合分析和讨论。结果表明,北槽河道具有非常适宜细颗粒泥沙絮凝的潮流、盐度、含沙量和悬沙颗粒粒径等基本环境条件。北槽河道悬沙絮团形态多样,主要包括松散状絮团、蜂窝状絮团和密实状絮团。絮团主要由细粉砂和黏土类细颗粒泥沙组成,表面多粗糙不平,结构或密或疏。絮团粒径变化与潮周期动力过程密切相关,具有周期性变化特征。涨、落憩时絮团粒径较大,涨、落急时絮团粒径较小。絮团粒径涨憩大于落憩,小潮大于大潮。垂向上,絮团粒径由表层至底层逐渐增大。周期性潮流流速对北槽河道悬沙絮团粒径变化起到了控制作用。北槽细颗粒泥沙絮凝作用,是导致疏浚航道发生回淤的主要原因之一。