Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.     

Population Structure and Secondary Production of the Mediterranean Octocoral Lophogorgia ceratophyta (L. 1758)

Abstract. The gorgonian Lophogorgia ceratophyta thrives in turbid water at Tinetto Rock, La Spezia Gulf, Ligurian Sea. Its age structure suggests that the population is in a steady state; nevertheless, it is difficult to discern whether the main factors controlling this population are biological or event-related. Secondary production was estimated by means of an increment-summation method and yielded 0.54 g ash-free dry weight (AFDW)*m^-1 a^-1. This estimate does not take into account biomass losses due to reproductive output and non-lethal predation. Standing stock biomass was 5.44 g AFDW e m^-2. The annual P/B ratio was 0.10 and turnover time about 10a     

基于实时路况数据的原发性交通拥堵点判别——以北京市二环以内为例

以北京市二环内道路为研究区域,将实时路况数据矢量化并构建其路网间拓扑关系,根据原发性拥挤与继发性拥挤时序上的差异,提出定量的拥堵度变化点的判别准则,将拥堵度变化点分为原发性拥堵、继发性拥堵、原发性消散、继发性消散4类.研究发现原发性拥堵的时空分布符合居民出行特征,重点集中于二环内热点区域,发生在岔路口处的概率较大,且验证了继发性较原发性在时空顺序上的滞后性.     

南京地区新近系含膏砂泥地层的发现及其意义

在进行南京市城市立体地质填图试点工作中,经钻探于仙林大学城发现一套新近系含膏砂泥地层,可与六合灵岩山雨花台组沉积地层对比。该地层的发现对于重新认识南京地区某些相类似断陷盆地基岩面之上的松散覆盖层的结构很有意义,对其在环境地质和工程地质中的影响进行了评述。同时,对地下水参与成矿作用进行了初步论述。     

四川什邡北部山区遥感调查次生地质灾害现状及防治建议

四川汶川发生8．0级强震后,在震中附近山区引发了大量的岩石崩滑、山体滑坡、堰塞湖等次生地质灾害,国土资源部中国地质调查局组织四川、湖北、湖南、陕西、安徽和中国地大的有关专家利用卫星遥感资料,迅速调查次生地质灾害情况,每天上报,供国务院等有关部门决策。本文选择重灾区之一的有代表性的什祁北部山区加以介绍,分析了特殊构造部位与次生地质灾害发生的关系,建立了次生地质灾害遥感解译标志,总结了该区次生地质灾害的主要类型,评价了该区的灾情现状,并提出了合理的防治建议,供同行们切磋。     

农村中小学选址的空间运筹

农村中小学的选址问题是当前地理学区位理论应用的一个热点,学校作为一个设施对学生上学安全和便捷程度有很大影响。许多学者研究了学校的区位问题,然而对农村地区来说,采用模型不够适合。本文学校选址研究充分考虑P-重心模型和P-中心模型的优缺点,在P-重心模型的基础上对模型进行改进,增加学生上学最大距离不超过某一阈值的约束,这样改进后的模型同时具有P-中心和P-重心模型的优点,既保证农村偏远地区的学生上学相对方便,又保证加权距离和相对最小。为了方便应用,应用地理信息科学方法,使用改进的节点交换搜索算法求解,然后通过Visual Studio 开发平台和ArcGIS Engine 二次开发组件库开发了农村中小学最优选址的决策支持系统。最后以山东省某镇为例,用该系统解决该镇的小学选址,结果发现改进后同时具有P-重心和P-中心特性的模型比传统的P-重心模型更能适合农村小学选址,能够作为小学学校规划选址的辅助决策依据。     

一株深海耐嗜压菌的细胞毒活性次生代谢产物研究

通过CCK8法检测分离自深海一株深海耐压菌Shewanella piezotolerans WP3次生代谢产物的细胞毒活性,研究了温度、压力、噬菌体对WP3次生代谢产物细胞毒活性的影响.发现WP3次生代谢产物具有良好细胞毒活性.低温因素可提高其细胞毒活性,在100μg/cm^3的含量下,代谢产物对肿瘤细胞Bel7402、CNE2、A549、HT1080细胞毒活性均有提高,其中对A549细胞毒活性提高了1.3倍.在最适温度（20℃）情况下,高压可降低其细胞毒活性.20 MPa培养条件下,代谢产物对4株肿瘤细胞均未表现出明显活性,而常压培养条件下对SW 480具有93.3%的抑制率,对HT1080抑制率表现出87.5%,对CNE2抑制率是79.8%.在低温情况下,压力因素对其细胞毒活性无影响,噬菌体对细胞毒活性影响不大.HPLC指纹图谱分析发现不同温度条件下,其次生代谢产物指纹图谱有变化,结合细胞毒活性结果分析,为后期分离鉴定细胞毒活性化合物提供指导.     

基于三维光学测量系统的三维建模软件研究

三维光学测量系统结合了数字近景摄影测量技术和结构光栅空间编码测量技术,同时具备摄影测量效率高和光栅测量精度良的优点。利用三维光学测量数据进行建模,可以很好地重构出原始物件的表面形状,在现代工业中有着不可替代的作用。利用三角形生长法生成点云数据的不规则格网的方法,构建其数据模型,通过CAD的二次开发实现其显示功能,研究表明：该软件能很好地重现物件的表面特征,建模精度高,可应用于三维光学测量的建模。     

生物降解原油中吡咯氮化合物组成的变化

渤海海域地区近50个原油样品中性氮组分的GC／MS定量分析资料表明,油藏中的生物降解作用对原油的吡咯氮化合物含量和分布有明显影响。经与同源未降解原油比较,各种烷基咔唑和苯并咔唑在3。4级中轻度降解油中就出现明显降解迹象,随生物降解程度增高其含量逐渐减少,在6—8级严重降解油中它们的总含量降低到原有的五分之一左右。在3—4级中轻度降解油中,裸露型甲基咔唑异构体更容易被微生物侵袭而代谢,抗生物降解能力按1-甲基咔唑〉4-甲基咔唑〉2-、3-甲基咔唑顺序递减;当降解程度更高时,这些化合物降解速率相当,1-／4-MCA等比值相对稳定。低-中等降解阶段,不同类型二甲基咔唑异构体的抗生物降解能力也存在明显差异性,呈屏蔽型〉半屏蔽型〉裸露型降低;在生物降解水平进一步增高时,这些异构体之间的相对含量变化不大。生物降解作用对苯并咔唑系列化合物分布的影响具有不确定性,且随降解程度的增加变得更为显著,降解油中【a】／[c】苯并咔唑比值或增高或降低。生物降解原油中吡咯氮化合物的组成变化,使降解油的二次运移示踪面临新的问题。     

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.