Signatures in flowing fluid electric conductivity logs

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.     

多级次地下水流系统的最小能耗率原理初探

20世纪60年代初期,Tóth基于定水头上边界条件推导出解析解,得出多级次地下水流系统,是水文地质学里程碑式的突破,成功地解决了一系列理论和实际问题。但Tóth解析解存在的缺陷也长期沿袭：单纯重视数学模拟而忽视物理机制;将地形控制地下水位看成是普适性规律;忽视给定水头上边界数学模拟的失真。这些缺陷,尤其是忽视物理机制探究,不仅妨碍Tóth理论自身发展,而且导致地下水流系统理论尚未被国际水文地质界普遍接受。参照河流动力学中应用的最小能耗率原理,类比提出地下水流最小能耗率的表达式。基于已有的通量上边界地下水流模式数值模拟结果,进一步探究物理机制,归纳得出地下水流系统遵循最小能耗率原理的结论。     

萃淋树脂吸附法测金

对萃淋树脂在酸性介质中吸附解脱金及相关体系的条件选择，以及萃淋树脂在生产方面的应用前景进行了实验研究。结果表明，萃淋树脂在稀王水介质中能较好地吸附金，用硫脲解脱金简便完全，检测限达0．002μg／g，吸附率达100％，解脱率99．8％。     

质量传输和同位素交换:流动几何学和交换机制

耦合的质量传输和动力学限制的同位素交换模型综合考虑了平流、扩散、热液弥散 ,以及岩石与水之间的不平衡同位素交换等项因素。把耦合模型应用于 2个构造环境下的古热液系统 ,进而解释稳定同位素数据。对于造成环绕浅成侵入岩体分布的18O亏损环带的流体的流动几何学 ,以及浅部正断层流体流动的几何学 ,耦合模型提供了不同于单一同位素交换模型的解释。耦合模型也提供了关于同位素相对交换速率和同位素交换机制的信息。结果表明 ,断层带的动态重结晶促进了表面反应 ,进而便利了同位素交换 ;在化学不反应性和未变形的矿物中 ,同位素交换可能受制于固态条件下的扩散。     

材料状态对干砂小应变特性的影响

利用注能虚拟质量(EIVM)共振柱系统进行了干砂小应变特性试验,研究了有效平均正应力、土样密度、剪应变幅值以及荷载往复次数对剪切模量和阻尼比的影响。试验结果表明,剪切模量随有效平均正应力与土样密度的增加而增加,而阻尼比的变化规律则与之相反,并且有效平均正应力对干砂小应变特性的影响程度比土样密度的影响程度大得多;随着剪应变的增加,剪切模量越来越小,而阻尼比越来越大;荷载往复次数对剪切模量基本没有影响,而对阻尼比有较大影响。     

洮河泥沙分布及变化分析

以洮河红旗站1956~2005年水文监测资料为依据,通过对泥沙分布特征、年内年际变化规律和水沙匹配情况进行分析,得出洮河泥沙具有含量高、输沙总量大、产沙的区域性、年际的波动性、年内的不均匀性和时间的集中性六大特点。     

地浸采铀浸出液氧化沉淀法除铁研究

在氧化沉淀法去除铁的过程中,氧化反应分别在自然曝气、充气和除钙的条件下进行,对照结果进行分析,得出最佳的除铁配方,同时还着重对氧化反应速率及其影响因素（pH,Eh等）进行了探索性研究,为以后试验提供了一定的依据。     

统计降尺度方法在青海省冬季最低温度预测中的应用

利用2003-2007年国家气象中心T213L31全球中期数值预报模式逐日输出产品与青海地区25个气象站的观测数据作为试验资料, 利用相关系数和逐步回归进行因子选择, 并以单隐层神经网络和多元回归作为降尺度方法进行对比研究, 用2003-2006年间的11月1日～次年3月1日的资料作为训练样本, 以数值预报产品和前一日观测的最低温度作为因子, 建立青海省25个气候站的冬季最低温度的24, 48, 72 h预报模型, 并且以2006年12月和2007年的1、 2月作为24, 48, 72 h逐日最低温度预报试验时段。试验表明, 对于青海地区来说, 青海北部地区的预报命中率总体好于南部高原地区; 在4种对比方案中, 以选择数值预报资料结合前一日地面观测的最低温度作为主要因子的方法相对较优, 随着预报时效的延长, 24 h历史实况的作用逐渐减弱; 对于所有台站来说, 这4种方案各有优缺点, 没有一种方案可以完全代替其他所有方案; 在实际业务运行中, 对不同的台站应采用不同的预报方案进行实际业务预报。     

K-Ar Ages of Granitic Magmatism and Related Pegmatite Formation at the Umanotani-Shiroyama Mine, Shimane Prefecture, SW Japan and Their Bearings on Cooling History

Abstract. The Umanotani-Shiroyama pegmatite deposits, the largest producer of K-feldspar and quartz in Japan, are of typical granitic pegmatite. Ilmenite-series biotite granite and granite porphyry, hosting the ore deposits, and biotites separated from these rocks yielded K-Ar ages ranging from 89.0 to 81.4 Ma and 95.2 to 93.7 Ma, respectively. Muscovite and K-feldspar separated from the ore zone yielded K-Ar ages with the range of 96.2 to 93.1 Ma and 87.3 to 80.7 Ma, respectively. Muscovites from quartz-muscovite veins in the ore zone and in the granite porphyry yielded K-Ar ages of 90.4 and 76.3 Ma, respectively. K-feldspar is much younger in age than coexisting muscovite. It is noted that the K-Ar ages of biotite separates and the whole-rock ages are identical to those of muscovite and K-feldspar in the ore zone, respectively. These time relations, as well as field occurrence, indicate that the formation of the pegmatite deposits at the Umanotani-Shiroyama mine is closely related in space and time to a series of granitic magmatism of ilmenite-series nature. Using closure temperatures of the K-Ar system for biotite and K-feldspar (microcline), cooling rate of the pegmatite deposits is estimated to be about 82C/m.y. at the beginning, but slowed down to about 15C/m.y. in the later period.