钙质砂抗剪强度特性的环剪试验

珊瑚礁沉积的钙质砂与石英砂的物理力学性质有较大差别。对取自南海岛礁的钙质砂进行了单次往返环剪试验以分析钙质砂的抗剪强度特性,试验中考虑了相对密实度和竖向应力对结果的影响,并与相同级配和试验条件下的石英砂进行对比分析。结果表明：钙质砂正向剪切时应力-位移曲线为软化型,具有明显的残余强度特性,而反向剪切时则表现为硬化型,正向和反向剪切强度基本一致;石英砂正向剪切和反向剪切均表现为软化型。钙质砂正向剪切和反向剪切残余强度与峰值强度的比值在0.75～0.93之间;石英砂正向剪切和反向剪切残余强度与对应峰值强度的比值在0.89～0.96之间。相同级配和试验条件下,钙质砂残余强度均大于石英砂,且强度比值基本保持在1.05～1.3之间。在100、200 kPa竖向荷载作用下,钙质砂0.5～2.0 mm的颗粒发生了破碎,破碎率分别为4%和6%。     

考虑钙质砂细观颗粒形状影响的液体拖曳力系数试验

钙质砂作为南海岛礁填筑常用的岩土材料,其渗透性很大程度上决定着填筑后土体的固结和沉降。拖曳力系数是表达流体对土体颗粒表面力的参数,也是表征颗粒状土体渗透能力的一个重要参数,目前国内外对钙质砂拖曳力系数的研究十分有限。首先引入一个修正的三维参数 对钙质砂这种天然非规则颗粒材料的形状进行定量描述,然后开展一系列单个钙质砂颗粒在液体中沉降试验,利用高速相机记录颗粒沉降过程,结合图像处理技术获得颗粒沉降平衡速度Ut,进而计算出拖曳力系数CD和雷诺数Re,最后拟合出包含CD、Re及 三个参数的钙质砂拖曳力系数半经验模型。结果发现,在相同雷诺数条件下钙质砂的形状系数 越大,拖曳力系数越小。通过与其他研究结果对比发现,其表面微孔隙越发育,拖曳力系数越小的规律。该模型能够考虑不规则颗粒形状对拖曳力系数的影响,从而提高对土体渗透性预测的精度,对南海岛礁填筑工程中钙质砂固结和沉降的计算也具有重要意义。     

基于MatDEM的砂土侧限压缩试验离散元模拟研究

离散元法基于非连续介质力学理论,尤其适用于砂土等离散介质体的数值模拟研究。利用岩土体离散元模拟软件MatDEM的二次开发功能,研发了砂土侧限压缩试验三维离散元模拟器。对三个不同级配砂土试样进行了侧限压缩试验,并且进行了与之相对应的数值模拟,通过分析对比试验结果与数值模拟结果验证了所开发模拟器的有效性。模拟结果表明:离散元法可以很好地反应砂土压缩过程中的配位数变化;每个模拟样品中,粒径较小的单元受到较大的平均压力,导致平均位移较大;数值计算结果的主要误差是由离散元颗粒自身的泊松比引起的。研究突破了常规土力学研究方法的局限性,为今后岩土工程离散元模拟研究提供了参考。      

华南地区5月降水的水汽特征分析

利用国家气候中心的降水资料及NCEP/NCAR再分析资料、NOAA海温资料分析了华南地区5月降水的主要水汽通道及变异机制。发现异常多雨年的水汽主要来自南海、孟加拉湾和青藏高原南侧;异常少雨年则因西太平洋副热带高压(简称副高)偏东,来自南海的水汽缺失,只有来自孟加拉湾和高原南侧的两股水汽,因而南海的水汽是影响华南地区5月降水的重要因素。分析发现当北太平洋的准东西向海温异常是"负正负"分布时,南海地区为异常的反气旋性环流,有利于副高西伸加强;北太平洋海温距平为"正负正"异常分布时,南海地区为异常的气旋性环流,副高东退减弱。此外,北方南下冷空气的阻挡使得季风北界位置偏南,冷空气和季风在华南地区交汇导致5月降水异常增多。     

High-resolution sequence stratigraphy,sedimentology and reservoir quality evaluation of the Yaojia Formation in the Longxi area of the Western Slope,Songliao Basin,China

Delta-front sand bodies with large remaining hydrocarbon reserves are widespread in the Upper Cretaceous Yaojia Formation in the Longxi area of the Western Slope, Songliao Basin, China. High-resolution sequence stratigraphy and sedimentology are performed based on core observations, well logs, and seismic profile interpretations. An evaluation of the reservoir quality of the Yaojia Formation is critical for further petroleum exploration and development. The Yaojia Formation is interpreted as a third-order sequence, comprising a transgressive systems tract (TST) and a regressive systems tract (RST), which spans 4.5 Myr during the Late Cretaceous. Within this third-order sequence, nine fourth-order sequences (FS9–FS1) are recognized. The average duration of a fourth-order sequence is approximately 0.5 Myr. The TST (FS9–FS5) mostly comprises subaqueous distributary channel fills, mouth bars, and distal bars, which pass upward into shallow-lake facies of the TST top (FS5). The RST (FS4–FS1) mainly contains subaqueous distributary-channel and interdistributary-bay deposits. Based on thin-sections, X-ray diffraction (XRD), scanning electron microscope (SEM) and high-pressure mercury-intrusion (HPMI) analyses, a petrographic study is conducted to explore the impact of the sedimentary cyclicity and facies changes on reservoir quality. The Yaojia sandstones are mainly composed of lithic arkoses and feldspathic litharenites. The sandstone cements mostly include calcite, illite, chlorite, and secondary quartz, occurring as grain coating or filling pores. The Yaojia sandstones have average core plug porosity of 18.55% and permeability of 100.77 × 10⁻³ μm², which results from abundant intergranular pores and dissolved pores with good connectivity. Due to the relatively coarser sediments and abundant dissolved pores in the feldspars, the FS4–FS1 sandstones have better reservoir quality than the FS9–FS5 sandstones, developing relatively higher porosity and permeability, especially the FS1 and FS2 sandstones. The source–reservoir–cap-rock assemblages were formed with the adjoining semi-deep lake mudstones that were developed in the Nenjiang and Qingshankou Formations. This study reveals the deposition and distribution of the delta-front sand bodies of the Yaojia Formation within a sequence stratigraphic framework as well as the factors controlling the Yaojia sandstones reservoir quality. The research is of great significance for the further exploration of the Yaojia Formation in the Longxi area, as well as in other similar lacustrine contexts.     

扬子浅滩东南海域海底潮流沙脊、沙波特征

利用seabat8101多波束系统对扬子浅滩东南海底地形进行了高精度探测。发现海底呈明显近乎平行排列的条带状起伏,脊谷相间,沙脊大部分呈NW-SE向排列,发育在45~50 m水深范围之内,沙脊横剖面不对称,大部分沙脊西南侧坡度大、东北坡缓。沙脊规模略有差异,沙脊宽度约0.6~9.8 km,沙脊之间间距可达8.9~22.4 km,高度约1.8~13.3 m,研究区内最长可达53 km。部分脊槽过渡区域发育成片链状海底沙波,沙波大致呈NE-SW走向,波高约0.3~1 m,波长1 km左右。研究区中西部有海底礁石孤立地突兀于相对平坦的海底之上,暂定名为扬礁,最浅水深35.9 m,位于30°59'7.4'~31°N,124°36'48.7'~124°37'40'E。扬子浅滩东南海域沙脊是介于活动沙脊和衰亡沙脊之间的准活动沙脊。该研究将为我国海洋开发和海洋经济发展、海洋行政管理以及海洋安全保障提供服务。     

Breaching-related turbidites in fluvial and estuarine channels: Examples from outcrop and core and implications to reservoir models

An understanding of the paleoenvironment and the main sedimentary processes behind preserved deposits is crucial to correctly interpret and represent lithofacies and facies associations in geomodels that are used in the hydrocarbon industry, particularly when a limited dataset of cores is available. In this paper a fairly common facies association is discussed containing massive sands - here defined as thick (>0.5 m) structureless sand beds devoid of primary sedimentary structures, or with some faint lamination - deposited by mass failures of channel banks in deep fluvial and estuarine channels. Amongst geologists it is generally accepted that liquefaction is the main trigger of large bank failures in sandy subaqueous slopes. However, evidence is mounting that for sand deposits a slow, retrogressive failure mechanism of a steep subaqueous slope, known as breaching, is the dominant process. A model of breaching-induced turbidity current erosion and sedimentation is presented that explains the presence of sheet-like massive sands and channel-like massive sands and the sedimentary structures of the related deposits. Sheet-like packages of spaced planar lamination that are found together with massive sand bodies in deposits of these environments are identified as proximal depositional elements of breach failure events. The model, acquired from sedimentary structures in deposits in the Eocene estuarine Vlierzele Sands, Belgium, is applied to outcrops of the Dinantian fluvial Fell Sandstone, England, and cores of the Tilje and Nansen fms (Lower Jurassic, Norwegian Continental Shelf). The possible breach failure origin of some other massive sands described in literature from various ancient shallow water environments is discussed. Breach failure generated massive sands possibly also form in deep marine settings. The potentially thick and homogeneous, well-sorted sand deposits bear good properties for hydrocarbon flow when found in such an environment. However, in case of deposition in an estuarine or fluvial channel, these sand bodies are spatially constricted and careful facies interpretation is key to identifying this. When constructing a static reservoir model, this needs to be considered both for in-place volume calculations as well as drainage strategies.     

辐射沙脊主要水道的演变特征及其水动力机制研究

近四十年来的水下地形资料对比显示：南黄海辐射沙洲区水道普遍存在逐渐向南偏移的趋势（西洋主槽冲深、南延,南翼烂沙洋水道、小庙洪水道向南逼进）。有关辐射沙洲整体南移的原因及机理虽有诸多猜想,但至今没有统一可靠的认识,这种趋势性过程的驱动力成为辐射沙洲区海岸冲淤动态研究及港口建设过程中亟待解决的问题。在恢复黄河北归以来苏北黄河三角洲海岸不同发育阶段的岸线位置和水下地形的基础之上,通过所建立的潮波数学模型,研究了在苏北黄河三角洲不同演变阶段南黄海潮波系统的特征及水动力变化。研究表明,随着岸线后退和水下三角洲的夷平,辐射沙洲地区潮差不断增大;水动力不断加强,而且加强的区域逐渐向南偏移,这种大范围区域性水动力主轴的向南偏移就有可能是导致辐射沙洲整体南移的主导因素之一。     

东太平洋CC区西区表层沉积物黏土矿物和地球化学特征

本文以太平洋CC区西区12个表层沉积物样品作为研究对象,对其粒度、化学组分和矿物成分进行分析,讨论其沉积环境和物质来源。研究区地处深海,主要以深海黏土和硅钙质黏土为主,含有少量的硅质黏土、黏土质硅质软泥和黏土质钙质软泥。黏土矿物成分主要是蒙皂石和伊利石,含有部分的高岭石和绿泥石。黏土矿物组成表明,区内沉积物主要是陆源,由高空气流携带而来,南极底流和热液活动对其物源的来源有一定影响。沉积物地球化学特征也表明,物源以陆源为主,稀土元素分布曲线和北太平洋表层海水稀土曲线类似,且表现出强的Ce亏损,表明生物活动导致的生物沉降对表层沉积物也有一定的影响。     

Basin modeling of the Late Miocene Zeit source rock in the Sudanese portion of Red Sea Basin: Implication for hydrocarbon generation and expulsion history

The Late Miocene Zeit Formation is exposed in the Red Sea Basin of Sudan and represents an important oil-source rock. In this study, five (5) exploratory wells along Red Sea Basin of Sudan are used to model the petroleum generation and expulsion history of the Zeit Formation. Burial/thermal models illustrate that the Red Sea is an extensional rift basin and initially developed during the Late Eocene to Oligocene. Heat flow models show that the present-day heat flow values in the area are between 60 and 109 mW/m². The variation in values of the heat flow can be linked to the raise in the geothermal gradient from margins of the basin towards offshore basin. The offshore basin is an axial area with thick burial depth, which is the principal heat flow source.The paleo-heat flow values of the basin are approximately from 95 to 260 mW/m², increased from Oligocene to Early Pliocene and then decreased exponentially prior to Late Pliocene. This high paleo-heat flow had a considerable effect on the source rock maturation and cooking of the organic matter. The maturity history models indicate that the Zeit Formation source rock passed the late oil-window and converted the oil generated to gas during the Late Miocene.The basin models also indicate that the petroleum was expelled from the Zeit source rock during the Late Miocene (>7 Ma) and it continues to present-day, with transformation ratio of more than 50%. Therefore, the Zeit Formation acts as an effective source rock where significant amounts of petroleum are expected to be generated in the Red Sea Basin.