地理国情要素数据成果的一致性检查方法

本文结合全国地理国情要素数据成果过程质量控制、质量复核工作,以及地理国情要素数据成果自身、与地表覆盖分类数据成果、与外业调查核查数据、与专题资料的一致性要求,通过分析检查中发现的质量问题,提出了地理国情要素数据成果的质量控制方法。该方法为国情要素数据成果的质量控制提供了技术参考,为质检工作提供了方法依据。     

省级测绘档案管理服务系统关键技术研究

结合山东省测绘档案管理服务系统的建设,理清了省级测绘档案接收、管理、服务的全业务流程,探讨了"图形、档案、库房"协同管理、基于模板的汇交管控等关键技术方法,实现了省级测绘档案"收、存、管、用"一站式服务。     

无人机航空摄影测量技术在矿区地形测量中的应用研究

无人机摄影测量是中小面积地形测绘的重要手段,具有低成本、高效率、高精度、信息量大、产品可以重复使用的优点,弥补了传统方法的不足。本文简要介绍了无人机航空摄影测量技术,从工程实例中,进一步论述了利用无人机,搭载非量测型相机,在地形复杂的高山矿区进行地形测量的过程和方法,评估了点位精度误差,希望能为相关领域研究人员提供借鉴。     

地图数据图层级批量综合功能的设计与研制

目前,已有地图综合系统使用过程中需要专业人员深度参与,耗时耗力、自动化程度较低。针对这一问题,从软件工程的角度探讨了图层级批量综合功能的研制。以1∶5万居民地图层数据的综合处理为例,分别从建筑物目标的剖分、特征参量定义与计算、综合操作决策与实施、综合控制规则建立与表达4个方面进行分析,尝试构建"特征诊断→行为决策→操作执行"的完整技术链条。结合样例数据对提出的技术设想进行可行性验证,并对后续工作进行展望。     

Critical conditions for natural gas charging and delineation of effective gas source rocks for tight sandstone reservoirs

Although it has been shown that the potential of tight‐sand gas resources is large, the research into the mechanisms of hydrocarbon charging of tight sandstone reservoirs has been relatively sparse. Researchers have found that there is a force balance during hydrocarbon charging, but discriminant models still have not been established. Based on the force balance conditions observed during gas migration from source rocks to tight sandstone reservoirs, a calculation formula was established. A formula for identifying effective source rocks was developed with the gas expulsion intensity as the discrimination parameter. The critical gas expulsion intensity under conditions of various burial depths, temperatures, and pressures can be obtained using the calculation formula. This method was applied in the Jurassic tight sandstone reservoirs of the eastern Kuqa Depression, Tarim Basin, and it was calculated that the critical expulsion intensity range from 6.05 × 10⁸ m³/km² to 10.07 × 10⁸ m³/km². The critical gas charging force first increases with depth and later decreases with greater depths. The distribution range of effective gas source rocks and total expelled gas volume can be determined based on this threshold. This method provides new insight into and method for predicting favourable tight‐sand gas‐bearing regions and estimating their resource potentials. Copyright © 2014 John Wiley & Sons, Ltd.     

2015年4月大气环流和天气分析

2015年4月环流特征如下：极涡为偶极型环流,极涡主体位于格陵兰西侧与加拿大之间,另一中心位于亚洲的东北部;两个极涡中心较常年平均偏低4~8 dagpm,乌拉尔山高压脊偏高8~12 dagpm;副热带高压面积偏大、西脊点偏西,南支槽位置与强度接近常年平均;4月全国平均气温11.6℃,较常年同期（11℃）偏高0.6℃;全国平均降水量43 mm,接近常年同期（44.7 mm）,我国中东部长江以北地区降水偏多,江南、华南降水偏少。4月全国强对流天气过程频发,1—4、19—20和28—29日出现了范围较大的强对流天气。北方地区出现2次沙尘天气。     

带有小数补偿的低频数控振荡器及其基于FPGA的实现

在分析数控振荡器（NCO）工作原理的基础上,以低频信号为例,研究了影响NCO性能的几个因素。结合杂散特性,着重讨论了频率控制字误差对输出频率带来的影响,提出在相位累加器中加入小数部分补偿,以使降低信号频率门限值和提高输出的准确性。最后采用FPGA（现场可编程门阵列）实现了带有小数补偿的NCO,在兼顾硬件资源的同时优化了系统性能,另外通过仿真验证了这种方法的可行性。     

FAST望远镜40米模型天文观测软件的开发

针对FAST的天文观测要求,对其天文观测软件进行了设计与开发。首先介绍了FAST天文观测的原理,对天文观测软件进行了需求分析。而后提出了馈源天文运动轨迹规划算法,并进行了仿真。针对其轨迹要求给出了控制方法,对天文观测控制软件进行了设计与实现。最后通过现场实地实验,验证了本文所提的算法与软件的可行性。     

卫星激光测距的电控系统设计与实现

给出的卫星激光测距的二轴系统实现了通过软件控制望远镜coude光路调整、接收系统SPAD和APD的自动切换、视场光阑大小的自动调节、以及发射光束指向的精确控制。该系统是基于MPC07运动控制卡,通过人机交互界面进行实时控制,旨在实现不同功能的调节,提高卫星激光测距的自动化程度。详细介绍了该系统的硬件组成、技术指标及软件工作方式。     

Effects of brace stiffness on performance of structures with supplemental Maxwell model‐based brace–damper systems

Shear‐type buildings with Maxwell model‐based brace–damper systems are studied in this paper with a primary emphasis on the effects of brace stiffness. A single‐story building with a viscous damper installed on top of a Chevron‐brace is first investigated. Closed‐form solutions are derived for the simple structure, relating the brace stiffness and damper coefficient to the targeted reduction in response displacement or acceleration. For a given brace stiffness, the solution is minimized to give a set of formulae that will allow the optimal damper coefficient to be determined, assuring the desired performance. The model is subsequently extended to multistory buildings with viscous dampers installed on top of Chevron‐braces. For a targeted reduction in the mean square of the interstory drift, floor acceleration or base shear force, the minimum brace stiffness and optimal damper coefficients are obtained through an iterative procedure. The response reduction, which signifies the improved performance, is achieved by a combination of brace stiffness and viscous damper coefficients, unlike conventional approaches where damper coefficients are typically optimized independent of brace stiffnesses. Characteristics of multi‐degree‐of‐freedom systems are studied using a 2‐story and a 10‐story buildings where the effects of brace stiffness on the overall performance of the building can be quantified. Copyright © 2010 John Wiley & Sons, Ltd.