Simulation of oasis breeze circulation in the arid region of the Northwestern China

In this paper, the process of oasis-desert circulation (ODC) is simulated by MM5V3.5 model through designing an ideal oasis-desert scheme and assuming that initial atmosphere is at rest (V = 0). The findings showed that the key of forming special oasis boundary structure is the difference of energy and water between oasis and desert. The evaporation of oasis surface consumes heat energy, and the low temperature of oasis causes an oasis breeze circulation (OBC), which drives an ODC with a downdraft over the oasis and an updraft over the desert. Later, the cold, dry and stable boundary over oasis is gradually formed, on the contrary,the atmospheric boundary over desert on the edge of oasis is hot, humid and unstable and its height is about 600 hPa. The updraft over the desert forms a wet ring that acts as a vertical wall weakening the low-level moisture exchange between the oasis and desert. The downdraft of OBC increases the atmospheric stability that reduces the oasis evaporation. The low-level outflow from the oasis (into the desert) prevents the dry, hot air flowing from the desert into the oasis.Thus an oasis self-preservation mechanism may be formed due to OBC. The horizontal area influenced by oasis is twice as oasis area and the vertical range is four times as oasis. The ODC is strong in the daytime and reaches the strongest at 17:00, and the influenced area is the largest at 20:00.     

Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct

Environmental vibrations from recent high-speed trains are becoming a special concern in the civil and environmental engineering field since they can give detrimental effects to residents, sensitive equipments and high-tech production facilities in the vicinity of train tacks. Herein, aiming at the vibration mitigation for a specific high-tech industrial area, the low-frequency vibrations from a train viaduct are targeted over an anticipated range. A theoretically designed innovative countermeasure, called honeycomb wave impeding barrier (WIB) for a wave impeding barrier, is introduced and its effects are investigated by computer simulation. The present WIB is based on the wave dispersion phenomenon that can modulate the incoming wavelengths into the shorter wavelengths, creating an apparent wave cut-off characteristic in the wave field across WIB installation area. The shorter wavelengths are further impeded due to the impedance ratio of the WIB walls and in-fill materials and absorbed by the in-fills more. The three-dimensional FEM simulation demonstrates a dramatic reduction effect that is difficult to achieve by conventional measures.     

遥感影像三维可视化研究

利用DEM高程资料实现遥感影像的三维显示可大大提高遥感监测产品的使用价值，而商用软件成本高操作繁琐普及困难。利用计算机图形学知识和Delphi编程语言，开发了一套遥感影像三维可视化软件。对在开发过程中遇到的有关DEM数据的裁剪与拼接、图像配准、地表模拟、透视变换、消隐处理、光照和阴影效果以及颜色变换等问题的解决方案和实现方法作了简要的介绍。     

GOALS模式对热带太平洋ENSO年际变化特征的模拟评估

文中重点分析了中国科学院大气物理研究所LASG最新发展的全球大气环流谱模式(R42L9)与一全球海洋环流模式(T63L30)耦合形成的全球海洋-大气-陆面气候系统模式(GOALS/LASG)新版本已积分30 a的模拟结果,通过与多种观测资料的对比分析,讨论了赤道太平洋海表温度(SST)的年际变化及其纬向传播、赤道东太平洋SST异常与其他洋面SST变化之间的遥相关关系、赤道太平洋浅表层海温的年际变化特征等研究内容.结果表明,COALS模式模拟出了赤道太平洋SST异常出现不规则的年际变化特点;赤道东太平洋SST异常的向西传播过程;赤道太平洋混合层海温变化由西向东、由深层向浅层的传播过程;同时也模拟出了赤道东太平洋SST变化与赤道西太平洋以及与西南太平洋海温之间的反相关关系,与南印度洋和副热带大西洋SST之间的正遥相关关系等实际观测现象.但COALS模式也存在明显的不足,如对赤道东、中太平洋SST异常的年际变化幅度明显偏小,没能模拟出赤道东太平洋的SST变化比赤道中太平洋强的特点;赤道太平洋SST从东向西的传播速度明显比实际观测慢得多,但混合层海温极值变化由西向东的传播速度明显比实际情况快得多;没能模拟出赤道东太平洋SST变化同西北太平洋SST的负相关和北印度洋海温变化的正相关现象,因此也影响了对南亚、东南亚降水年际变化的模拟能力.     

发现过程模型法对大港陆地探区油气资源的评价

对现有油气资源基本评价方法的原理、优缺点、适应性做了分析总结，重点剖析了在油藏总体分布服从帕莱托分布基础上建立起来的发现过程模型法．同时根据已建立的油气藏总体预测模型，对符合发现过程模型的大港陆地古近系成藏体系进行了油气资源评价。     

昌马水库右岸山体稳定性研究

昌马水库导流排砂洞塌方导致右岸山体发生松动 ,本文在大量地质资料的基础上 ,对右岸岩体裂隙网络进行模拟 ,同时 ,采用极限分析能量法和有限元数值模拟方法等对右岸山体的稳定性进行分析研究 ,并提出相应的加固方案。     

董家山隧道小净距段爆破控制的数值模拟

结合都-汶高速公路董家山隧道小净距段的实际情况,应用数值模拟方法,对小净距段在爆破荷载作用下的相互影响问题进行了研究.结果表明在隧道爆破施工中应对迎爆侧进行重点监控,采用合理的开挖和加固方式将有效降低爆破施工对先建隧道的不利影响.研究结论可为类似小净距段隧道的爆破设计、施工及现场监控量测提供参考.     

降雨条件下岩土饱和-非饱和渗流分析

基于Buckley-Leverett两相渗流方程,提出了新的岩土饱和-非饱和渗流数学模型,利用有限差分方法给出了隐式压力显示饱和度数值求解方法,编制了饱和-非饱和渗流计算程序.结合工程实例,模拟了降雨入渗条件下边坡岩体渗流场孔隙压力变化和含水饱和度变化,模拟结果验证了所提出的模型对饱和-非饱和渗流的有效性.     

Numerical simulations for coupled rock deformation and gas leak flow in parallel coal seams

Based on the new viewpoint of interaction mechanics for solid and gas, gas leakage in parallel deformable coal seams can be understood. That is, under the action of varied geophysical fields, the methane gas flow in a double deformable coal seam can be essentially considered to be compressible with time-dependent and mixed permeation and diffusion through a pore-cleat deformable, heterogeneous and anisotropic medium. From this new viewpoint, coupled mathematical models for coal seam deformation and gas leak flow in parallel coal seams were formulated and the numerical simulations for slow gas emission from the parallel coal seams are presented. It is found that coupled models might be close to reality. Meanwhile, a coupled model for solid deformation and gas leak flow can be applied to the problems of gas leak flow including mining engineering, gas drainage engineering and mining safety engineering in particular the prediction of the safe range using protective layer mining where coal and gas outbursts can efficiently be prevented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Indicator Simulation Accounting for Multiple-Point Statistics

Geostatistical simulation aims at reproducing the variability of the real underlying phenomena. When nonlinear features or large-range connectivity is present, the traditional variogram-based simulation approaches do not provide good reproduction of those features. Connectivity of high and low values is often critical for grades in a mineral deposit. Multiple-point statistics can help to characterize these features. The use of multiple-point statistics in geostatistical simulation was proposed more than 10 years ago, on the basis of the use of training images to extract the statistics. This paper proposes the use of multiple-point statistics extracted from actual data. A method is developed to simulate continuous variables. The indicator kriging probabilities used in sequential indicator simulation are modified by probabilities extracted from multiple-point configurations. The correction is done under the assumption of conditional independence. The practical implementation of the method is illustrated with data from a porphyry copper mine.