基于FEA的填充墙与隔震器协同抗震系统性能分析

隔震器与填充墙对建筑抗震性能有很大作用。为了探究填充墙布置形式及填充材料和隔震器协同作用对钢筋混凝土框架结构动力特性及抗震性能的影响,采用等效斜撑理论,对3种不同填充墙布置形式与隔震器协同作用的抗震系统方案进行对比分析,研究发现顶层不布置填充墙与隔震器协同抗震系统钢筋混凝土框架结构的抗震性能最佳。在此系统上分析了不同填充材料对钢筋混凝土框架结构抗震性能的影响,结果表明,加气混凝土砌块填充墙的钢筋混凝土框架结构抗震性能最好。     

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.     

考虑尺寸效应的近海桥梁天然橡胶隔震支座力学性能老化时变规律研究

目前天然橡胶支座（NRB）的性能研究大多未考虑尺寸效应,在前期开展的近海桥梁隔震支座和材料老化时变规律研究的基础上,同时考虑支座直径尺寸变化和老化作用时间的影响对NRB的性能进行研究。首先采用ABAQUS有限元软件对不同直径尺寸NRB的性能进行分析,得到了NRB性能随直径尺寸的变化规律;然后结合前期老化作用对NRB及其橡胶材料性能时变规律的影响研究成果,分析了直径尺寸及老化作用时间共同作用下,NRB性能的变化规律,并通过ABAQUS有限元分析,验证了该变化规律的准确性。结果表明:NRB的水平刚度和竖向刚度均随其直径尺寸的增大呈正比例增大趋势;NRB水平刚度比和竖向刚度比均随老化作用时间的增长呈线性增大趋势;且直径为150mm的NRB在实际环境老化60a后,其水平刚度和竖向刚度的增长幅度分别为:30.8%和16.41%,由此可见老化作用时间对NRB水平刚度的影响较显著,对其竖向刚度的影响较小。研究内容可为隔震桥梁结构中支座缩尺模型试验的相关设计提供参考,并为将实验室缩尺橡胶隔震支座的相关成果较好地应用于实际工程计算及设计中提供依据。     

Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

块状地质体的多面体表示及交互编辑

针对固体矿产的地质建模问题,中国科技工作者提出了用于人机交互构造块状地质模型的“橡皮膜技术”并在此基础上完成了人机交互计算机辅助勘查系统PandaCAEX。“橡皮膜技术”可以快速地构造出任意形状的块状地质模型,为地质模型的构造提供了极大的方便。但“橡皮膜技术”本身存在着模型表达过于复杂和一些功能上的缺陷。本文针对这些问题提出直接使用多面体模型对块状地质体进行表达,同时给出了模型的交互编辑方法。与“橡皮膜技术”相比,这种技术在保留“橡皮膜技术”优点的同时,使块状地质模型的表达大大简化、功能更加完善。该模型已经成为新的改进系统的核心,证明了模型的实用性。     

Seismic isolation for low‐to‐medium‐rise buildings using granulated rubber–soil mixtures: numerical study

This paper presents the preliminary research works on a potential seismic isolation method that makes use of scrap rubber tires for the protection of low‐to‐medium‐rise buildings. The method involves mixing shredded rubber tire particles with soil materials and placing the mixtures around building foundations, which provides a function similar to that of a cushion. Meanwhile, the stockpiling of scrap tires is a significant threat to our environment, and the engineering community has been looking for long‐term viable solutions to the recycling and reuse of rubber. A finite element program has been developed for modeling the time‐domain dynamic responses of soil–foundation–structure system, by which the effectiveness and robustness of the proposed method have been evaluated. In general, the structural responses, in terms of acceleration and inter‐story drift, can be reduced by 40–60%. Copyright © 2012 John Wiley & Sons, Ltd.     

Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling

Horizontal bidirectional loading tests are conducted for real-sized high-damping rubber (HDR) bearings with diameters of 700 mm (HDR700) and 1300 mm (HDR1300). The hysteresis loops of these bearings under bidirectional horizontal loadings are compared with those under unidirectional loadings. The results show that the bearing force measurement in the primary direction of loading increases when there is displacement in the orthogonal direction. Unusually, the maximum restoring force in the orthogonal direction to the primary loading direction occurs near zero displacement. On the basis of the observations of the restoring forces, a rate-independent model is proposed. This model simulates well the test results under both bidirectional loading and unidirectional loading. It can reproduce the irregular restoring forces characteristics around zero displacement as described above. Bidirectional loading induced twist deformation in the HDR bearings that increased local shear strains. This phenomenon results in an early failure as observed in HDR700. The additional shear strain is estimated based on the twist deformation measured by video image analysis. The comparison of the nominal total shear stress demonstrates that the increase of shear stress because of bidirectional loading occurs when the average shear strain is larger than about 200%. The larger the shear strain, the greater the bidirectional effect. It is shown that the nominal total shear stress of average strain of 350% under bidirectional circular loading pattern is approximately the same as the average shear strain of 400% under unidirectional loading. This means that the average shear strain of 350% under a bidirectional circular loading corresponds to a local shear strain of 400%. Copyright © 2012 John Wiley & Sons, Ltd.     

中老缅交界地区橡胶种植的时空格局及其地形因素分析

橡胶林地是东南亚地区主要的土地利用类型,动态监测橡胶种植并分析其时空变化规律,对于区域土地资源开发、生态环境保护以及维护边境安全稳定具有重要意义。本文基于遥感技术实地研究了中老缅交界地区1980-2010 年的橡胶林地分布格局及其时空变化规律,定量分析了橡胶林地的分布特征及其地形因素的影响与限制。结果表明:(1) 2010 年中老缅交界地区橡胶林地面积为60.14 万hm²,占土地面积的8.17%,是研究区最大的土地利用类型。就林地结构来看,橡胶成林(≥10 年) 与橡胶幼林(<10 年) 之比大体是5:7,近10 年来橡胶林地扩展迅速。(2) 1980-2010 年中老缅交界地区橡胶林地已由最初的7.05 万hm²增加到60.14 万hm²,扩展近9 倍,橡胶林地扩张显著。橡胶林地已呈现由集中至分散、由边境向国外,“以景洪为中心、北上南进、西拓东扩”的空间分布格局与地域扩展特征。(3) 中老缅交界地区橡胶种植受地形因素制约,橡胶林地4/5 以上集中在600~1000 m适宜区间,很少超过1200 m;近2/3 集中分布在8°~25°的坡地,极少或很少分布在超过35°的急陡坡;主要分布在南坡和东坡,北坡和西坡相对较少,橡胶种植强度也呈现相同规律。(4) 橡胶林地国别对比分析表明,中国境内橡胶林地在向高海拔、陡坡地扩展,老缅境内具有较大地形适宜空间,有利于橡胶种植的跨境发展。(5) 中老缅交界地区的橡胶种植必将由中国向老挝和缅甸跨境发展,老挝和缅甸境内,特别是近中国边境地区的橡胶林地持续扩张已是不可避免。     

模型试验柔性均布压力加载系统研制及其应用

地质力学模型试验均布压力精确加载是保证试验精度的前提。为此研制了一种新型柔性均布压力加载系统,该系统主要包括液压自动控制系统和柔性均布压力加载装置。液压自动控制系统操作方便,可实现计算机自动控制12路压力精确伺服加、卸载和长期稳压。柔性均布压力加载装置由液压油缸、球铰、刚性推力器和柔性传力橡胶垫块等组成,采用数值方法确定柔性橡胶的厚度为50 mm。该系统应用到表面不平的模型加载中并与刚性加载进行了对比。试验结果表明,柔性均布压力加载系统相对于刚性加载效果显著,模型内应力场均匀程度取决于橡胶传力垫块的邵氏硬度、加载应力大小和距表面深度。邵氏硬度小的橡胶柔性加载模型内应力场更均匀;且模型应力场随加载应力增大趋于均匀。模型内应力场距加载表面越远越均匀,柔性加载使距加载表面130 mm以下应力场基本保持均匀状态。试验表明,柔性均布压力加载系统有利于提高模型试验加载精度,具有广泛的应用前景。