A DEVICE FOR MEASURING GULLY HEADWALL MORPHOLOGY

This paper describes a low-cost device for measuring the three-dimensional morphology of a gully headwall. The device was designed to operate in a gully system with the following characteristics: overhanging banks caused by a thick, dense root mat; retreat of the underlying unconsolidated sediments through small slab failures, leading to a considerable variation in retreat rate at each point on the headwall; and changes in the orientation of the headwall owing to changes in sediment properties and the topographical and hydrological controls of gully growth. The device is used to measure a series of closely spaced vertical profiles of the headwall, and the collected data are combined to draw a contour map showing the distance from the plane of the instrument to the headwall. Comparing maps for sequential times enables retreat rates for the diffferent proportions of the headwall to be quantified.     

地磁台网高压直流输电判别处理系统设计

介绍地磁高压直流输电干扰自动判断处理系统的主要功能、架构设计和运行流程,并对其核心功能的实现过程进行描述。本系统为全国地磁观测人员处理高压直流输电干扰提供具体时间、幅度参考标准,有利于地磁预处理数据质量的提高。     

Depositional sequence architecture and filling response model of the Cretaceous in the Kuqa depression, the Tarim basin

The Cretaceous system of the Kuqa depression is a regional scale (second order) depositional sequence defined by parallel unconformities or minor angular unconformities. It can be divided into four third-order sequence sets, eleven third-order sequences and tens of fourth- and fifth-order sequences. It consists generally of a regional depositional cycle from transgression to regression and is composed of three sets of facies associations: alluvial-fluvial, braided river-deltaic and lacustrine-deltaic facies associations. They represent the lowstand, transgressive and highstand facies tracts within the second-order sequence. The tectonic subsidence curve reconstructed by backstripping technique revealed that the Cretaceous Kuqa depression underwent a subsidence history from early accelerated subsidence, middle rapid subsidence and final slower subsidence phases during the Cretaceous time, with the correspondent tectonic subsidence rates being 30-35 m/Ma, 40-45 m/Ma and 5-10 m/Ma obtained from northern foredeep. This is likely attributed to the foreland dynamic process from early thrust flexural subsidence to late stress relaxation and erosion rebound uplift. The entire sedimentary history and the development of the three facies tracts are a response to the basin subsidence process. The slower subsidence foreland gentle slope was a favorable setting for the formation of braided fluvial deltaic systems during the late period of the Cretaceous, which comprise the important sandstone reservoirs in the depression. Sediment records of impermanent marine transgression were discovered in the Cretaceous and the major marine horizons are correctable to the highstands of the global sea level during the period.     

一种高效率的软件开发方法--以用户为中心的软件开发方法(UCD)

软件开发是海洋监测技术与设备研究与开发的一个重要的环节,软件开发质量的高低直接关系到海洋监测仪器和设备的质量。文中阐释了以用户为中心的软件开发方法的概念、特点以及其实施中的基本原则和关键活动,并对传统的软件开发方法和以用户为中心的软件开发方法进行了比较研究。该方法不仅提高了用户的生产效率和生产质量,而且还减少了企业支持和培训方面的费用,提高了产品和服务的竞争力。     

Reducing fishing vessel fuel consumption and NOX emissions

There is a growing concern with the impact of marine operations on the environment. This requires reducing fuel consumption and vessel pollution during operation. On-board computers and satellite communications will enable the operator to reduce fuel consumption and NO_X emissions during vessel operations.This paper presents the results of a study on this problem and how such an on-board system could be implemented to reduce fuel consumption and engine NO_X emissions.     

尼日尔盆地油藏水道沉积构型识别及演化规律

深海水道作为深水环境中重要的储层类型,具有极为丰富的深海油气资源,近年来一直是深海油田勘探和开发的重点区域,但对水道内部构型边界的识别刻画仍然是一个难点。依据三维地震数据以及测井和岩心资料,对西非X油藏水道进行了内部构型边界的精细划分,并分析了其水道演化模式。研究表明：区内水道体系边界可通过地震相特征差异进行识别,并将其分为限制性、半限制性和非限制性3种类型;复合水道边界可通过“垂向分期”和“侧向划界”原则进行确定;单一水道边界可通过水道边界振幅强弱变化进行识别,其在平面上有单侧向迁移和沿下游摆动迁移2种迁移模式,在剖面上单向侧向迁移段水道呈侧向迁移的特征,沿下游摆动段呈现出多期水道相互摆动切叠的特征;水道体系的演化可划分为初始形成、快速发育、平稳发育以及水道消亡4个阶段,对应一个完整的海平面变化旋回。     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.     

基于“天地图”的位置服务平台的设计与实现

在位置服务平台建设过程中,为了解决全国性地图数据源、标准统一、详实性、现势性等问题,设计在地图数据源上采用国家、省、市三级的"天地图"地图服务。并且介绍了平台的分布式架构、多服务器集群服务技术、多终端协议集成服务技术及"天地图"接入实现应用的方法。     

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。