储层岩石电性特征的逾渗网络模型研究(英文)

建立能够反映储层孔隙结构、流体特征的逾 渗网络模型,通过数值模拟研究了储层孔隙尺寸、 孔隙形状、连通性、微孔隙的发育状况等对I-Sw曲 线影响的定性规律,研究了地层水矿化度对岩石电 阻率的影响。分析讨论了不同因素对电阻率影响的 相对强度。最后,通过曲线拟合定量地研究了不同 因素对I-Sw曲线的影响规律。研究表明,在上述影 响因素中连通性和微孔隙对I-Sw曲线的影响很大, 其它因素的影响强度较小。地层水矿化度对岩石电 阻率绝对值的影响很大。“非阿尔奇”现象普遍存在, 在低渗透(低连通性)储层岩石中更为明显。     

石灰改良膨胀土力学性质的研究

膨胀(?)主要是由强亲水性粘土矿物蒙脱石和伊利石组成的,是具有膨胀性、多裂隙性和超固结性的高塑性粘性土。在铁路施工中,膨胀土不能直接作为路基填土,必需进行改良。通过室内试验的方法来讨论石灰改良膨胀土的力学性质在各种影响因素下的变化规律。     

Analysis of village accessibility and its impact on land use dynamics in a mountainous province of northern Vietnam

Surveys carried out in mountainous areas of northern Vietnam at research sites selected across a gradient of market integration, revealed strong relationships between the location of the village with respect to the national road network and the nature of its land-use systems, its poverty level and more generally its potential for development. We developed and tested in Bac Kan province a method to give an objective and quantitative definition of accessibility over a large geographic area. Accessibility maps integrated in a provincial GIS showed that despite recent improvements to the road network, some remote areas do not benefit from recent development.     

Sediment concentration changes in runoff pathways from a forest road network and the resultant spatial pattern of catchment connectivity

Hydrological connectivity is a term often used to describe the internal linkages between runoff and sediment generation in upper parts of catchments and the receiving waters. In this paper, we identify two types of connectivity: direct connectivity via new channels or gullies, and diffuse connectivity as surface runoff reaches the stream network via overland flow pathways. Using a forest road network as an example of a landscape element with a high runoff source strength, we demonstrate the spatial distribution of these two types of linkages in a 57 km² catchment in southeastern Australia. Field surveys and empirical modelling indicate that direct connectivity occurs primarily due to gully development at road culverts, where the average sediment transport distance is 89 m below the road outlet. The majority of road outlets were characterised by dispersive flow pathways where the maximum potential sediment transport distance is measured as the available hillslope length below the road outlet. This length has a mean value of 120 m for this catchment. Reductions in sediment concentration in runoff plumes from both pathways are modelled using an exponential decay function and data derived from large rainfall simulator experiments in the catchment. The concept of the volume to breakthrough is used to model the potential delivery of runoff from dispersive pathways. Of the surveyed road drains (n=218), only 11 are predicted to deliver runoff to a stream and the greatest contributor of runoff occurs at a stream crossing where a road segment discharges directly into the stream. The methodology described here can be used to assess the spatial distribution and likely impact of dispersive and gullied pathways on in-stream water quality.     

AutoCAD技术在道路工程施工测量中的应用

在道路建设中,通常分为几个标段同时施工,每个标段里一般包括路基及各种构造物,因此,施工测量任务十分繁重,由于全站仪在工程测量中的普遍应用,其极坐标放样功能使测量工作中出现错误主要为坐标计算错误,特别是具有记忆功能的全站仪,可以事先输入坐标,复核后再到现场放样。所以测量的主要工作就是根据施工图纸计算其各个部位的坐标,而如何快速、准确地计算坐标是关键所在。应用AutoCAD技术进行坐标定位计算,则可以做到事半功倍,并能取得良好的施工效果。     

GPS定位技术在福建地壳形变监测中的应用

随着GPS观测及数据处理技术的发展,GPS定位技术在地球动力学方面的应用越来广泛,本文介绍国内外利用GPS定位技术在地球动力学方面的应用现状,着重介绍了GPS精密定位技术在福建地壳形变监测方面的应用现状和取得的初步成果。     

On size and boundary effects in scaled model blasts spatial problems

This paper addresses size and boundary effects on wave propagation, fracture pattern development and fragmentation in small scale laboratory-size specimens for model blasting. Small block type specimens are centre-line loaded by linear explosive charges and supersonically detonated. Using elastic wave propagation theory and fracture mechanics it is shown that the type of boundary conditions which prevail at the outer boundary of the cylinder control the extension of bore-hole cracking and fragmentation within the body of the cylinder. In the case of a composite block where a cylindrical core of different material is embedded, the level of fracturing and fragmentation is controlled by the separation of the interface which in turn depends on the relative dimensions of the core and the block. The most important parameter is the ratio between the length of the pulse (space-wise or time-wise) and the characteristic dimensions of the models, i.e. in this case the dimensions of the core and the mantel. Stress wave superposition effects occur in the corner sections of the mantel. Theoretical results are in good agreement with recent experimental findings.     

Prediction of creep characteristic of rock under varying environment

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.