矿山酸性水中铝相次生矿物及环境学意义的研究进展

酸性矿山排水（AMD）是硫化矿床矿山环境污染防治的难点,因而持续受到国内外学者的关注。众多的学者对矿区AMD中次生矿物进行了研究。为深入了解AMD中次生矿物的形成和演化,为AMD污染防治提供科学依据,笔者对前人不同环境下AMD中的次生矿物类型、次生矿物形成顺序,以及铝相次生矿物的形成、特征、环境危害及意义进行了简要综述。目前与AMD有关的主要次生矿物存在3种类型,即铁相次生矿物、铝相次生矿物和其他相次生矿物,AMD中的pH、Eh和温度对于次生矿物的形成具有控制性的作用。铁、铝相次生矿物具有吸附金属能力,这一性质有助于在一定程度上实现河流的自净化作用。由于AMD形成条件高,矿物相不稳定,目前有关AMD中铝相次生矿物及“酸性白水”的研究成果有限。因此,加强铝相次生矿物以及“酸性白水”的研究,可以更好地解析蒿坪河流域石煤矿区河流酸性磺水–酸性白水的形成演化机制,以及铝相次生矿物吸附重金属的地球化学过程。     

新疆牙哈地区新近系沉积相及油气勘探意义

利用地震资料具有横向分辨率高的优点,将地震资料与录井资料和测井资料相结合,用地震相分析、地震振幅属性分析、相干分析和可视化等手段对牙哈地区新近系的河道展布进行了刻画,确定了河道、河漫滩、决口扇和曲流砂坝等沉积相类型的平面展布.在新近系共识别出7期大型河道,总面积为619 km2,可形成有利勘探面积75 km2,为牙哈地区新近系下一步勘探提供了依据.     

Evaluation of a probabilistic approach to simulation of alkalinity and electrical conductivity at a river bank filtration site

In river bank filtration, impurities present in the river water travel with the bank filtrate towards the pumping well. During this passage, certain types of impurities, such as turbidity, total coliform, and so forth, may get attenuated; however, it is interesting to note that some of the instant raw river water quality parameters, such as alkalinity and electrical conductivity, increase after the passage of water through the porous medium. This occurs because water, when passing through the soil pores, absorbs many of the solutes that cause an increase in alkalinity and electrical conductivity. Measurements at a river bank filtration site for a year showed that alkalinity of 116–32 mg l^?1 in river water increased to 222.4–159.9 mg l^?1 in the river bank filtered water. Likewise, the electrical conductivity increased from 280–131 μS cm^?1 to 462–409.6 μS cm^?1. This study uses a probabilistic approach for investigating the variation of alkalinity and electrical conductivity of source water that varies with the natural logarithm of the concentration of influent water. The probabilistic approach has the potential of being used in simulating the variation of alkalinity and electrical conductivity in river bank filtrate. Copyright © 2011 John Wiley & Sons, Ltd.     

Graphical methods of river profile analysis to unravel drainage area change,uplift and erodibility contrasts in the Central Range of Taiwan

To reveal river channel steepness patterns and variance in settings with significant variation in rock uplift rate, rock erodibility and moving water divides, we present a series of graphical methods to interpret channel profiles. To complement Cartesian χ plots, longitudinal profiles and mapping methods, we introduce a new method based on a radial coordinate system. We map each basin onto polar coordinates in which the radial dimension is χ and the azimuthal coordinate, ?, is calculated with an increment (Δ?) scaled to the distance to neighboring channel heads. The elevation is contoured on this mapping. Average channel steepness is estimated by fitting a conical surface to the elevation. The graph simplifies the comparison of χ and elevation between channels that share a divide, and helps identify spatial changes in drainage area and patterns of erodibility. We apply this approach to derive the uplift pattern in the eastern and southern Central Range of Taiwan, where the high tectonic convergence and uplift rates combined with sub‐tropical climate and frequent typhoons results in high exhumation rate, and well‐developed, detachment‐limited river networks. Additionally, the tectonic activity leads to drainage basin reorganization. We identify examples of divide migration, discrete river capture as well as anomalous steepness that we attribute to local variability in rock erodibility. Estimated basin‐average steepness values show the highest and a near constant value from Hsinwulu basin to Liwu basin in the center of the Island. To the north and south of this region, the values gradually decrease. These estimates show good correlation with the topography of the Central Range and erosion rates derived from in situ ¹⁰Be concentrations in river‐borne quartz. We conclude that the basin steepness reflects systematic differences in rock uplift rate and erosion rate. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of a confluence‐based sediment‐fingerprinting approach to a dynamic sedimentary catchment,New Zealand

Fine sediment is a dynamic component of the fluvial system, contributing to the physical form, chemistry and ecological health of a river. It is important to understand rates and patterns of sediment delivery, transport and deposition. Sediment fingerprinting is a means of directly determining sediment sources via their geochemical properties, but it faces challenges in discriminating sources within larger catchments. In this research, sediment fingerprinting was applied to major river confluences in the Manawatu catchment as a broad‐scale application to characterizing sub‐catchment sediment contributions for a sedimentary catchment dominated by agriculture. Stepwise discriminant function analysis and principal component analysis of bulk geochemical concentrations and geochemical indicators were used to investigate sub‐catchment geochemical signatures. Each confluence displayed a unique array of geochemical variables suited for discrimination. Geochemical variation in upstream sediment samples was likely a result of the varying geological source compositions. The Tiraumea sub‐catchment provided the dominant signature at the major confluence with the Upper Manawatu and Mangatainoka sub‐catchments. Subsequent downstream confluences are dominated by the upstream geochemical signatures from the main stem of Manawatu River. Variability in the downstream geochemical signature is likely due to incomplete mixing caused in part by channel configuration. Results from this exploratory investigation indicate that numerous geochemical elements have the ability to differentiate fine sediment sources using a broad‐scale confluence‐based approach and suggest there is enough geochemical variation throughout a large sedimentary catchment for a full sediment fingerprint model. Combining powerful statistical procedures with other geochemical analyses is critical to understanding the processes or spatial patterns responsible for sediment signature variation within this type of catchment. Copyright © 2015 John Wiley & Sons, Ltd.     

River evaporation,condensation and heat fluxes within a first‐order tributary of Catamaran Brook (New Brunswick,Canada)

Stream temperature plays an important role in many biotic and abiotic processes, as it influences many physical, chemical and biological properties in rivers. As such, a good understanding of the thermal regime of rivers is essential for effective fisheries management and the protection aquatic habitats. Moreover, a thorough understanding of underlying physical processes and river heat fluxes is essential in the development of better and more adaptive water temperature models. Very few studies have measured river evaporation and condensation and subsequently calculated corresponding heat fluxes in small tributary streams, mainly because microclimate data (data collected within the stream environment) are essential and rarely available. As such, the present study will address these issues by measuring river evaporation and condensation in tributary 1 (Trib 1, a small tributary within Catamaran Brook) using floating minipans. The latent heat flux and other important fluxes were calculated. Results showed that evaporation was low within the small Trib 1 of Catamaran Brook, less than 0.07 mm day^?1. Results showed that condensation played an important role in the latent heat flux. In fact, condensation was present during 34 of 92 days (37%) during the summer, which occurred when air temperature was greater than water temperature by 4–6 °C. Heat fluxes within this small stream showed that solar radiation dominated the heat gains and long‐wave radiation dominated the heat losses. © 2015 Her Majesty the Queen in Right of Canada. Hydrological Processes. © 2015 John Wiley & Sons, Ltd.     

Prediction of river water temperature: a comparison between a new family of hybrid models and statistical approaches

River water temperature is a key physical variable controlling several chemical, biological and ecological processes. Its reliable prediction is a main issue in many environmental applications, which however is hampered by data scarcity, when using data‐demanding deterministic models, and modelling limitations, when using simpler statistical models. In this work we test a suite of models belonging to air2stream family, which are characterized by a hybrid formulation that combines a physical derivation of the key equation with a stochastic calibration of parameters. The air2stream models rely solely on air temperature and streamflow, and are of similar complexity as standard statistical models. The performances of the different versions of air2stream in predicting river water temperature are compared with those of the most common statistical models typically used in the literature. To this aim, a dataset of 38 Swiss rivers is used, which includes rivers classified into four different categories according to their hydrological characteristics: low‐land natural rivers, lake outlets, snow‐fed rivers and regulated rivers. The results of the analysis provide practical indications regarding the type of model that is most suitable to simulate river water temperature across different time scales (from daily to seasonal) and for different hydrological regimes. A model intercomparison exercise suggests that the family of air2stream hybrid models generally outperforms statistical models, while cross‐validation conducted over a 30‐year period indicates that they can be suitably adopted for long‐term analyses. Copyright © 2016 John Wiley & Sons, Ltd.     

Metrics to assess how longitudinal channel network connectivity and in‐stream Atlantic salmon habitats are impacted by hydropower regulation

Habitat fragmentation in channel networks and riverine ecosystems is increasing globally due to the construction of barriers and river regulation. The resulting divergence from the natural state poses a threat to ecosystem integrity. Consequently, a trade‐off is required between the conservation of biodiversity in channel networks and socio‐economic factors including power generation, potable water supplies, fisheries, and tourism. Many of Scotland's rivers are regulated for hydropower generation but also support populations of Atlantic salmon (Salmo salar L.) that have high economic and conservation value. This paper investigates the use of connectivity metrics and weightings to assess the impact of river barriers (impoundments) associated with hydropower regulation on natural longitudinal channel connectivity for Atlantic salmon. We applied 2 different weighting approaches in the connectivity models that accounted for spatial variability in habitat quality for spawning and fry production and contrasted these models with a more traditional approach using wetted area. Assessments of habitat loss using the habitat quality weighted models contrasted with those using the less biologically relevant wetted area. This highlights the importance of including relevant ecological and hydrogeomorphic information in assessing regulation impacts on natural channel connectivity. Specifically, we highlight scenarios where losing a smaller area of productive habitat can have a larger impact on Atlantic salmon than losing a greater area of less suitable habitat. It is recommended that future channel connectivity assessments should attempt to include biologically relevant weightings, rather than relying on simpler metrics like wetted area which can produce misleading assessments of barrier impacts.     

Investigation of the thermal regime and subsurface properties of a tidally affected,variably saturated streambed

Temperature and moisture content in the variably saturated subsurface are two of the most important physical parameters that govern a wide variety of geochemical and ecological processes. An understanding of thermal and hydraulic processes and properties of transient vadose zones is therefore fundamental in the evaluation of such processes. Here, an investigation of the thermal regime and subsurface properties of a tidally affected, variably saturated streambed is presented. Field and laboratory measurements, as well as a forward numerical model, are jointly employed in the investigation. Temperature, soil moisture, surface level, and water level data were recorded in a transect perpendicular to a tidally driven stream. Frequency‐domain analysis of the subsurface temperature measurements revealed the rapid decay of the tidal temperature driver within the top ～30 cm of sediment. Several techniques were used to evaluate subsurface thermal and hydraulic properties, including thermal conductivity and the soil water retention curve. These properties were used to constrain a forward numerical model that included coupled treatment of relevant variable saturation thermal and hydraulic physics. Even though the investigated vadose zone is intermittent and relatively shallow ( 20 cm), the results illustrate how error can be introduced into heat‐transport calculations if unsaturated conditions are not taken into account.     

Variability in the vertical hyporheic water exchange affected by hydraulic conductivity and river morphology at a natural confluent meander bend

River confluences and their associated tributaries are key morphodynamic nodes that play important roles in controlling hydraulic geometry and hyporheic water exchange in fluvial networks. However, the existing knowledge regarding hyporheic water exchange associated with river confluence morphology is relatively scarce. On January 14 and 15, 2016, the general hydraulic and morphological characteristics of the confluent meander bend (CMB) between the Juehe River and the Haohe River in the southern region of Xi'an City, Shaanxi Province, China, were investigated. The patterns and magnitudes of vertical hyporheic water exchange (VHWE) were estimated based on a one‐dimensional heat steady‐state model, whereas the sediment vertical hydraulic conductivity (K_v) was calculated via in situ permeameter tests. The results demonstrated that 6 hydrodynamic zones and their extensions were observed at the CMB during the test period. These zones were likely controlled by the obtuse junction angle and low momentum flux ratio, influencing the sediment grain size distribution of the CMB. The VHWE patterns at the test site during the test period mostly showed upwelling flow dominated by regional groundwater discharging into the river. The occurrence of longitudinal downwelling and upwelling patterns along the meander bend at the CMB was likely subjected to the comprehensive influences of the local sinuosity of the meander bend and regional groundwater discharge and finally formed regional and local flow paths. Additionally, in dominated upwelling areas, the change in VHWE magnitudes was nearly consistent with that in K_v values, and higher values of both variables generally occurred in erosional zones near the thalweg paths of the CMB, which were mostly made up of sand and gravel. This was potentially caused by the erosional and depositional processes subjected to confluence morphology. Furthermore, lower K_v values observed in downwelling areas at the CMB were attributed to sediment clogging caused by local downwelling flow. The confluence morphology and sediment K_v are thus likely the driving factors that cause local variations in the VHWE of fluvial systems.