Vertical variations of wave-induced radiation stress tensor

INTRODUcrIONThe concept of radiation stress was deve1oPed by tonguet--Higgins and Stewart (1964 ),who intreduced the definition of radiation stress as the excess mornentum due to the presence ofwaves, on the basis of time-averaged laws of Newtonian fluid mechanics and the assmption ofa unifOrm velocity distribution over depth. Subequently, the theory has been applied success-fully in the investigation of phenomena such as wave set-up and set--down (Bowen et al.,l968), longshore currents …     

频率域电磁法中视电阻率全区定义

视电阻率定义在电法勘探中得到广泛的应用。目前在频率域电磁法中常常采用远区视电阻率定义。由于在频率域中收发距并非足够大,以致在低频段远区定义视电阻率往往不能反映地下电阻率值。我们定义全区电阻率及引入校正系数K,经二层三层模型及野外实测资料的计算,证明了方法的有效性。     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Electromagnetic methods to characterize the Savoia di Lucania waste dump (Southern Italy)

The aim of this work is the joint application and integration of non-invasive geoelectrical methods for studying the landfill of Savoia di Lucania (Southern Italy). This landfill for its engineering features and small dimensions (70 m × 30 m × 6 m) represents an optimal test site to assess a geophysical survey protocol for municipal solid waste landfills investigation and monitoring. The landfill of Savoia di Lucania has been built with a reinforced concrete material and coated with a high-density polyethylene (HDPE) liner. Three electrical resistivity tomographies (ERT), two self-potential (SP) map surveys and one induced polarization (IP) section have been performed, both in the surrounding area and inside the waste landfill. The geophysical investigations have well defined some buried boundaries of the landfill basin and localized the leachate accumulation zones inside the dumpsite. Comparison of our results with other engineering and geological investigations could be the key for evaluating the integrity of the HDPE liner. Finally, the joint use of the ERT, IP and SP methods seems to be a promising tool for studying and designing new monitoring systems able to perform a time-lapse analysis of waste landfill geometry and integrity.     

视真电阻率ρz在定井位中的应用探讨

介绍了视真电阻率ρz计算方法，通过对实际测深资料与井中电测资料的对比，证明了视真电阻率ρz的可靠性。在实际应用中可取得良好的效果。     

岩石复电阻率Dias模型及其参数求取方法

Dias模型是众多描述岩石复电阻率的频散特性模型中的一种,它不但参数少,且可由这些参数导出具有特定物理意义的参数。针对Dias模型参数的求取及反演解的不确定性评价,这里提出了一种模拟退火阻尼最小二乘联合反演方法。该方法首先将参数求解空间离散化,利用模拟退火找到全局最优解区间,然后利用阻尼最小二乘法在解空间进行求解。该方法有效地克服了原来两种方法的反演速度慢、反演结果依赖于初值的缺点,并实现了对反演结果多解性的评价。研究结果表明,对于岩石复电阻率数据的处理解释,Dias模型的使用比传统的Cole模型及其变形更具有潜在的优势。     

不等电极距情况下高密度电阻率法的反演结果分析

通过高密度电阻率法的模型实验,得出不等电极距情况对直立高阻薄板和低阻球体反演结果的影响:缺失电极对它正下方的ρ_s影响最大,而异常形态主要在水平方向有明显的变化,异常体随电极缺失的位置有趋势变化,电极缺失的数目越多,异常形态变化越大,但是从整体来看反演剖面图基本相似。     

可控深度电法对水平柱体和垂直界面的计算和实验

球状地球体可控深度电法的效应系数可近似地全面表达可控深度电法和各种效应。通过点源二度体的电算模拟实验，证明了该方法在水平柱状体和地下存在电阻率垂直界面的条件下，也是有效的。     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。