联合多代卫星测高和多源重力数据的局部大地水准面精化方法

本文研究了基于泊松小波径向基函数融合多代卫星测高及多源重力数据精化大地水准面模型的方法.分别以沿轨垂线偏差和大地水准面高高差作为卫星测高观测量,研究了使用不同类型测高数据对于大地水准面建模精度的影响.针对全球潮汐模型在浅水区域及部分开阔海域精度较低的问题,引入局部潮汐模型研究了不同潮汐模型对于大地水准面的影响.数值分析表明:相比于使用沿轨垂线偏差作为测高观测量,基于沿轨大地水准面高高差解算得到的大地水准面模型的精度更高,特别是在海域区域,其精度提高了2.3cm.由于使用沿轨大地水准面高高差作为测高观测量削弱了潮汐模型长波误差的影响,采用不同潮汐模型对大地水准面解算的影响较小.总体而言,船载重力及测高观测数据在海洋重力场的确定中呈现互补性关系,联合两类重力场观测量可以提高局部重力场的建模精度.     

哈尔滨测绘院GNSS系统进行GPS静态四等水准测量的研发

哈尔滨测绘院利用GNSS系统进行GPS静态四等水准控制测量的设计与实现是哈尔滨市GNSS系统进行GPS高等级静态水准控制测量的历史性突破,比对常规四等水准测量检测成果,成果精度优良。利用GNSS系统进行GPS静态四等水准控制测量,大幅度地缩短了工期,降低了外业劳动强度,整体组织科学,实现了良好的社会效益,对哈尔滨市及黑龙江省以至于全国GNSS系统进行GPS静态高等级水准控制测量起到了带头和推动作用。     

水准面精化成果在公路勘测中的应用

通过在玉树西南高海拔、无控制点区域公路工程的生产作业中,利用常规方法和玉树似大地水准面精化成果在基础控制测量中的应用,互相校核,通过相关应用数据统计,为西部困难地区取代低等级水准测量和精化成果的推广应用进行了有益的探讨.     

In situ study of the $$ R\overline{3} c \to R\overline{3} m $$ orientational disorder in calcite

The temperature dependences of the crystal structure and intensities of the (113) and (211) reflections in calcite, CaCO₃, were studied using Rietveld structure refinements based on synchrotron powder X-ray diffraction data. Calcite transforms from to at about T _c = 1,240 K. A CO₃ group occupies, statistically, two positions with equal frequency in the disordered phase, but with unequal frequency in the partially ordered phase. One position for the CO₃ group is rotated by 180° with respect to the other. The unequal occupancy of the two orientations in the partially ordered phase is obtained directly from the occupancy factor, x, for the O1 site and gives rise to the order parameter, S = 2x − 1. The a cell parameter shows a negative thermal expansion at low T, followed by a plateau region at higher T, then a steeper contraction towards T _c, where the CO₃ groups disorder in a rapid process. Using a modified Bragg–Williams model, fits were obtained for the order parameter S, and for the intensities of the (113) and (211) reflections. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Nodal-based three-dimensional discontinuous deformation analysis (3-D DDA)

This paper presents a new numerical model that can add a finite element mesh into each block of the three-dimensional discontinuous deformation analysis (3-D DDA), originally developed by Gen-hua Shi. The main objectives of this research are to enhance DDA block’s deformability. Formulations of stiffness and force matrices in 3-D DDA with conventional Trilinear (8-node) and Serendipity (20-node) hexahedral isoparametric finite elements meshed block system due to elastic stress, initial stress, point load, body force, displacement constraints, inertia force, normal and shear contact forces are derived in detail for program coding. The program code for the Trilinear and Serendipity hexahedron elements have been developed, and it has been applied to some examples to show the advantages achieved when finite element is associated with 3-D DDA to handle problems under large displacements and deformations. Results calculated for the same models by use of the original 3-D DDA are far from the theoretical solutions while the results of new numerical model are quite good in agreement with theoretical solutions; however, for the Trilinear elements, more number of elements are needed.     

有限断层模型在2015年9月16日智利Mw8.3级地震海啸数值模拟中的应用与评估

2015年9月16日22时54分（当地时间）智利中部近岸发生M_w8.3级地震,震源深度25 km。同时,强震的破裂区长200 km,宽100 km,随之产生了中等强度的越洋海啸。海啸影响了智利沿岸近700 km的区域,局部地区监测到近5 m的海啸波幅和超过13 m的海啸爬坡高度。太平洋区域的40多个海啸浮标及200多个近岸潮位观测站详细记录了此次海啸的越洋传播过程,为详细研究此次海啸近场及远场传播及演化规律提供了珍贵的数据。本文选择有限断层模型和自适应网格海啸数值模型建立了既可以兼顾越洋海啸的计算效率又可以实现近场海啸精细化模拟的高分辨率海啸模型。模拟对比分析了海啸的越洋传播特征,结果表明采用所建立的模型可以较好地再现远场及近场海啸特征,特别是对近场海啸的模拟结果非常理想。表明有限断层可以较好地约束近场、特别是局部区域的破裂特征,可为海啸预警提供更加精确的震源信息,结合高分辨率的海啸数值预报模式实现海啸传播特征的精细化预报。本文结合观测数据与数值模拟结果初步分析了海啸波的频散特征及其对模型结果的影响。同时对观测中典型的海啸波特征进行的简要的总结。谱分析结果表明海啸波的能量主要分布在10~50 min周期域内。这些波特征提取是现行海啸预警信息中未涉及,但又十分重要的预警参数。进一步对这些波动特征的详细研究将为海啸预警信息及预警产品的完善提供技术支撑。     

Atmospheric inorganic aerosol of a non-industrial city in the centre of an industrial region of the North of Spain,and its possible influence on the climate on a regional scale

Mineral particles could have influenced on the climate of Oviedo, a non-industrial city situated in the centre of an industrial zone of the North of Spain, increasing the temperature and the precipitations, in spite of the fact that “greenhouse gases” concentrations have diminished in this city in recent years. The directive (1999/30/EC) of the European Commission began to be applied in Oviedo in the year 2003. In agreement with this norm, our first aim was the identification of the inorganic particulate matter of the PM10 and PM2.5 fractions sampled in this city. X-ray diffraction and scanning electron microscopy coupled with X-ray dispersive energy spectrometry were used. The percentages of the different mineral phases of the PM were obtained by a Rietveld refinement of powder X-ray diffraction data. The compositions of the PM10 and PM2.5 fractions of this city are similar. Sulphates are the most abundant particles in the both fractions. Most sulphates, nitrates and sal-ammoniac would have formed by reaction between solid, liquid and/or gas particles and they could be associated with the power stations near to the city and traffic. Wüstite and haematites come from the iron and steel industries of Gijón and Avilés. The main natural sources of halite and carbonates and silicates are sea spray and soil resuspension by the wind, respectively.     

面向对象的精细化建模分析

本文首先利用像片与点云融合建模的技术方法,提出了面向对象的精细化建模思路,从数据采集、数据处理及模型生产3个阶段对某一景观小品进行了实践与探索。然后通过对比分析,得出不同类别传感器所获取的数据在模型成果中的优缺点。最后利用点云与像片融合建模的技术,解决了实景模型几何结构粗糙、纹理差的问题,为小尺度规划工作提供了可参考的基础数据。     

高光谱红外传感器在轨光谱定标

高光谱红外传感器高精度在轨光谱定标是红外遥感定量反演及应用的重要前提.本文针对大气红外探测仪AIRS (Atmospheric Infrared Sounder)的观测数据,分析传感器等效入瞳亮温与大气透过率光谱中的吸收线特征,基于NODD和包络线去除的光谱归一化处理,融合多种光谱匹配算法构建非线性代价函数,提出了一种...     

The role of iron in tetrahedrite and tennantite determined by Rietveld refinement of neutron powder diffraction data

Rietveld refinement of neutron powder diffraction data on four samples of synthetic, iron-bearing tetrahedrite (Cu_12?xFe_xSb₄S₁₃) with x = 0.28, 0.69, 0.91, 2.19 and four samples of synthetic tennantite (Cu_12?xFe_xAs₄S₁₃) with x = 0.33, 0.38, 0.86, 1.5 indicate unambiguously that iron is incorporated into tetrahedral M1 (12d) sites and not into triangular M2 (12e) sites in the cubic crystal structure (space group I $ \ifmmode\expandafter\bar\else\expandafter\=\fi{4} Rietveld refinement of neutron powder diffraction data on four samples of synthetic, iron-bearing tetrahedrite (Cu_12−xFe_xSb₄S₁₃) with x = 0.28, 0.69, 0.91, 2.19 and four samples of synthetic tennantite (Cu_12−xFe_xAs₄S₁₃) with x = 0.33, 0.38, 0.86, 1.5 indicate unambiguously that iron is incorporated into tetrahedral M1 (12d) sites and not into triangular M2 (12e) sites in the cubic crystal structure (space group I 3 m). The refinement results also confirm that M2 is a split (24g), flat-pyramidal site situated statistically on both sides of the S1−S1–S2 triangle. In tetrahedrite, this split is about 0.6 ?, in tennantite about 0.7 ?. Trends in bond lengths and magnitude of the M2 split were evaluated by means of linear regression with Fe concentration as the independent variable.