基于遥感的黄河三角洲蒸散的动态分析

Evapotranspiration (ET) is an important parameter for water resource management. Compared to the traditional ET computation and measurement methods, the ET computation method based on remote sensing has the advantages of quickness, precision, raster mapping and regional scale. SEBAL, an ET computation model using remote sensing method is based on the surface energy balance equation which is a function of net radiance flux, soil heat flux, sensible heat flux and latent heat flux. The former three fluxes can be computed through the parameters retrieved from remote sensing image, then the latent heat flux can be obtained to provide energy for ET. Finally we can obtain the daily ET. In this study SEBAL was applied to compute ET in the Yellow River Delta of China where water resource faces a rigorous situation. Three Landsat TM images and meteorology data of 1999 were used for ET computation, and spatial and temporal change patterns of ET in the Yellow River Delta were analysed.     

蒸发皿系数Kp计算方法研究

应用指标回归法和定性（风速和相对湿度）定量（吹程）资料，建立了蒸发皿系数Kp计算方程，并用黄河下游引黄灌区48个观测站实测资料进行了验证计算。计算结果表明，应用该方程，可大大改善Kp值的计算精度。     

变参考慢度Born近似傅氏偏移

针对常规Born近似傅氏偏移方法对于剧烈横向变速介质不能精确成像的状况而提出了变参考慢度Born近似傅氏偏移，理论上解决了任意速度变化地质模型的偏移成像问题。此外，为进一步提高复杂地层的成像精度和波场延拓算子的稳定性，对散射波场的计算公式作了改进。将改进的方法运用于盐丘模型的正演和偏移试验，并与常规Born近似偏移方法相比较，可明显看出变参考慢度Born近似傅氏偏移方法在效果上要优于后者，其处理速度横向变化的能力大大增强。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.     

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).     

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal     

国家地理空间信息基准框架工程建设

提出了国家地理空间信息基准框架内改进与更新原有的大地坐标基准、高程基准和重力基准的建设道路及解决原则。     

CHARACTERISTICS OF EVAPOTRANSPIRATION IN THE YANGTZE DELTA REGION FOR PAST 40 YEARS AND MAIN INFLUENCE FACTORS*

The Kotoda-Bortan (KB) model (Liu and Kotoda 1998) used for estimating evapotranspiration was modified.The monthly evapotranspiration for various surfaces in the Yangtze Delta (118-123°E,28-33°N) was calculated using the modified model,and the annual regional average of evapotranspiration from 1961 to 1998 was obtained using a weighting method.The spatial and temporal distribution characteristics of evapotranspiration were analyzed.It is found that the regional averaged annual evapotranspiration has a decreasing trend over the past 40 years;the value dropped by about 24mm from 1961 to 1998.The main reason for this tendency is due to the change of land surface condition.Compared with the case of 1980,the current proportions of paddy field,farmland and water surface have decreased by 1.353%,4.42% and 2.597% respectively,while the proportions of urban area and non-agriculture land have increased by 3.345%.These changes clearly result in a decrease of the regional averaged evapotranspiration.     

高斯平面坐标换算到测区平均高程面上的方法

依据高斯投影原理，提出了一种在高斯平面与任决高程平面间进行坐标转换的方法，并设计了相应的计算软件。