多卜勒雷达经向速度资料的预处理方法

利用变分法原理提出了对雷达速度资料进行预处理的一种方法，数值试验表明该法能有效地消除雷达速度资料中的小尺度运动径向速度分量及“噪声”。     

单站点无地面控制摄影机自检校

“单站点无地面控制摄影机自检校”是一种利用纯摄影测量信息检校摄影机的方法。本文由共线条件方程出发导出了顾及到摄影机旋转中心与其摄影中心不一致时正直摄影象片与倾斜摄影象片同名象点坐标的几何关系式及线性化的误差方程式。编制了适用于VAX-11/750计算机使用的FORTRAN程序,并给出了用模拟数据和实际数据的计算结果。     

An equal area conversion model for rasterization of vector polygons

Vector-raster conversion is one of the classic research topics in the field of Geographical Information Systems (GIS). The algorithms commonly used in GIS are devoted to maintaining the vector polygons' shape characteristics, but neglect the gain and loss of a polygon's area, which is another important attribute. This paper proposes an equal-area conversion model based on an area compensation optimization principle. According to the topological relationship among polygons and boundary grids, a neighborhood compensation principle was adopted to assign the attributes of boundary grids and a global optimization algorithm was developed to minimize area distortion in the whole data set. Two experiments were designed and the results indicated that this algorithm not only guaranteed the area error is as small as possible, but also has the advantage as being adaptive to polygon shape and spatial structure.     

基于数码相机立体像对的物体3维信息快速获取方法

研究了数码相机的内方位元素检测和镜头畸变差校正，应用近景摄影测量的原理与方法，提出了一种基于立体像对无物方控制的物体表面3维模型信息快速获取方法，试验表明，该方法获取3维信息速度快、精度较高。同时文中还比较了可变焦数码相机和固定焦距相机在获取3维信息精度方面的差异。     

重磁数据的线性滤波与反演失真问题

文中对国内研制的4种主要线性滤波方法进行了对比分析。选出一种具代表性的滤波方法,用计算机模拟观测场,探讨了在复杂干扰下重磁异常因滤波引起的失真,并就重磁异常在因滤波而引起失真的情况下如何反演解释,提出了可行的办法和建议。     

Distorted Froude‐scaled flume analysis of large woody debris

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.     

地壳上层水平位移与江西省二叠纪沉积相带的畸变

江西省茅口—龙潭期地层研究的较为详细,可分为3区6小区,反映出当时古地理条件下所形成的不同沉积相带,它们沿走向相当稳定,沿倾向则有规律递变。但目前这种有规律的分布已经错乱,通过地层对比推知在武夷山、武功山及九岭山等地均发生过较大规模的水平位移。正是这种水平位移导致了江西省二叠纪沉积相带的畸变与古地理图失真。目前这些山区的核心部位均无盖层,其原因不仅仅在于风化剥蚀,构造剥蚀可能是更重要的因素。     

空间墨卡托投影研究

主要研究适合星下点轨迹是赤道的卫星数据投影选择的空间墨卡托投影,推导了空间墨卡托投影公式,研究了其变形情况,并证明了该投影是等角空间投影,最后给出了算例。     

一种根据曲率变化检校畸变差的方法

提出了基于曲率变化的畸变差检校方法。首先对影像上提取的直线进行二分，根据重新匹配出的直线可确定实际物方直线在影像上的投影因镜头畸变而产生弯曲的程度，以此可对镜头的畸变进行检校。但对于镜头畸变较大的情况二分直线无法检测出实际曲线的弯曲程度，因此，需要对所有共线的直线进行分组，由每组直线来确定实际曲线的弯曲程度，检校镜头畸变，从而消除其对影像的影响。实验证明，通过这种方法对镜头畸变进行检校，能够得到较好的结果。