山区公路软基病害研究

随着高等级公路建设规模的扩大，山区公路所面临的路基病害特别是软土路基病害问题也逐渐增多。结合对陕南勉(县)一宁(强)高速公路工程实例分析，对山区软土成因及其特性进行了初步分析，认为山区软土属以坡洪积、湖积和冲积为主的软土，也有少量是由坡残积物堆积而形成。山区软土的特殊性表现在成分的复杂性、分布的不均匀性、隐蔽性和物理力学性质的特殊性。根据其特性以及中国山区公路软基普遍存在的病害问题，总结了山区公路软基的主要病害类型为剪切拉裂破坏、浸水沉陷破坏、剥蚀坍塌破坏、推挤滑动破坏。还提出了相应的软基处理方法及建议。     

模糊划分矩阵在岩土参数概率分布中的应用

讨论如何在小样本条件下用已有的过程经验与试验资料确定岩土参数概率分布,用模糊划分矩阵与BAYES方法相结合,给出由小样本试验数据确定岩土参数的概率分布。     

量子化学方法研究氯代苯酚类化合物对水生物毒性的构效关系

对20个氯代苯酚类化合物进行了CNDO/2量子化学计算,讨论了化合物电子结构与其对水生物翻车鱼(Bluegill)、花鳉鱼(Guppy)、和虾(Shrimp)半致死量之间的关系,分别获得了表示其构效关系的三个线性方程,它们的显著性均远高于α=0.01水平。结果表明:氯代苯酚化合物苯环上碳原子的兀电荷之和(∑Qπ_R)越大苯环上碳原子的净电荷之和(∑Q_R)越大,或LUMO轨道能(E_(LUMO))越低,均使化合物对Bluegill和Guppy水生物的毒性增大;而化合物苯环上羟基邻位的碳原子的兀电荷布居(P_3)越大,同时HOMO轨道能E_(HOMO)越高,则化合物对Shrimp毒性也越大。据此,可预测氯代苯酚类化合物对上述三种水生物的毒性。     

重力插值方法研究

为了根据离散观测数据构制连续空间重力变化图像，分析和讨论了３种数值插值方法，计算结果表明多面函数方法插值精度最高。由于逐步回归分析筛选核函数中心点的计算繁琐，文中提出根据分形理论和Ｓｈａｎｎｏｎ取样定理来确定核函数中心点。对滇西试验场进行模拟试算，插值精度可达到４～５（１０－８ｍｓ－２）。     

优化发电能源结构的初探

从我国电力工业发展的角度，浅析了国内外发电能源结构及其变化趋势，作者认为优化我国发电能源结构、采取必要的技术措施，是实现我国电力 工业可持续发的重要途径。     

Numerical calculations in the orbital determination of an artificial satellite for a long arc

Numerical methods are usually used for the computation of ephemerides with perturbations for the precise orbital determination of an artificial satellite. But their numerical stability will be encountered in a long arc. In this case the use the improved Encke special perturbation methods has been suggested. The results of this paper show that Encke's method does indeed have a certain effectiveness, but cannot yet completely resolve the numerical stability, and the more efficient method is to use the energy integral or its variational relation to control the growth of the along-track error in general numerical calculations so that the aim of stabilization can be achieved.     

太阳活动区磁场观测的一种新方法

在太阳活动区的物理研究中,特别是在二维动力学光谱分析中,迫切需要相应活动区的磁图资料。本文介绍了在太阳光谱仪的入射狭缝后安装一种新型偏振器进行活动区二维磁场观测的新方法。这种方法不仅能获得日面上任一点的磁场强度,且可快速获得活动区的纵向场磁图。除此之外,还可利用多条谱线的同时观测,获得有关磁力线管结构等方面的资料。     

About Darcy's law in non-Galilean frame

This paper is aimed towards investigating the filtration law of an incompressible viscous Newtonian fluid through a rigid non-inertial porous medium (e.g. a porous medium placed in a centrifuge basket). The filtration law is obtained by upscaling the flow equations at the pore scale. The upscaling technique is the homogenization method of multiple scale expansions which rigorously gives the macroscopic behaviour and the effective properties without any prerequisite on the form of the macroscopic equations. The derived filtration law is similar to Darcy's law, but the tensor of permeability presents the following remarkable properties: it depends upon the angular velocity of the porous matrix, it verifies Hall–Onsager's relationship and it is a non-symmetric tensor. We thus deduce that, under rotation, an isotropic porous medium leads to a non-isotropic effective permeability. In this paper, we present the results of numerical simulations of the flow through rotating porous media. This allows us to highlight the deviations of the flow due to Coriolis effects at both the microscopic scale (i.e. the pore scale), and the macroscopic scale (i.e. the sample scale). The above results confirm that for an isotropic medium, phenomenological laws already proposed in the literature fails at reproducing three-dimensional Coriolis effects in all types of pores geometry. We show that Coriolis effects may lead to significant variations of the permeability measured during centrifuge tests when the inverse Ekman number Ek⁻¹ is 𝒪(1). These variations are estimated to be less than 5% if Ek⁻¹<0.2, which is the case of classical geotechnical centrifuge tests. We finally conclude by showing that available experimental data from tests carried out in centrifuges are not sufficient to determining the effective tensor of permeability of rotating porous media. Copyright © 2004 John Wiley & Sons, Ltd.     

A stepwise method for determining the number of component distributions in a mixture

This paper considers the problem of estimatingm, the number of components in a finite mixture of distributions from a parametric family. A step-up procedure using the bootstrap method is proposed. Some properties of the procedure are illustrated with simulation studies. An example of the method, applied to orientation of beach clasts, is given.