Ontogenic variation and effect of collection procedure on leaf biomechanical properties of Mediterranean seagrass Posidonia oceanica (L.) Delile

Leaf mechanical traits are important to understand how aquatic plants fracture and deform when subjected to abiotic (currents or waves) or biotic (herbivory attack) mechanical forces. The likely occurrence of variation during leaf ontogeny in these traits may thus have implications for hydrodynamic performance and vulnerability to herbivory damage, and may be associated with changes in morphologic and chemical traits. Seagrasses, marine flowering plants, consist of shoot bundles holding several leaves with different developmental stages, in which outer older leaves protect inner younger leaves. In this study we examined the long‐lived seagrass Posidonia oceanica to determine ontogenic variation in mechanical traits across leaf position within a shoot, representing different developmental stages. Moreover, we investigated whether or not the collection procedure (classical uprooted shoot versus non‐destructive shoot method: cutting the shoot without a portion of rhizome) and time span after collection influence mechanical measurements. Neither collection procedure nor time elapsed within 48 h of collection affected measurements of leaf biomechanical traits when seagrass shoots were kept moist in dark cool conditions. Ontogenic variation in mechanical traits in P. oceanica leaves over intermediate and adult developmental stages was observed: leaves weakened and lost stiffness with aging, while mid‐aged leaves (the longest and thickest ones) were able to withstand higher breaking forces. In addition, younger leaves had higher nitrogen content and lower fiber content than older leaves. The observed patterns may explain fine‐scale within‐shoot ecological processes of leaves at different developmental stages, such as leaf shedding and herbivory consumption in P. oceanica.     

基于SPOT6遥感影像的滩涂湿地入侵种互花米草植株高度的反演研究

本文以SPOT6 高空间分辨率遥感影像为数据源,通过植被覆盖度和地上生物量两个参数进行滩涂湿地入侵种互花米草植株高度的估算研究。结果表明,三沙湾滩涂湿地互花米草植株高度平均值为2.04 m,以1~2 m和2~3 m植株为主要分布高度,分布面积分别为6.83 km2和10.31 km2,占研究区互花米草总面积的33.83%和51.06%,小于1 m和大于3 m的互花米草仅占9.26%和5.84%。估算值与真实值之间的均方根误差为0.204,绝对误差为0.04~0.37 m。该方法是对高空间分辨率光学影像应用研究的重要尝试,其反演方法具有较好的可行性,可较为准确的获取滩涂湿地植株高度信息。     

西北太平洋浪流相互作用对有效波高的影响研究

西北太平洋强流区会对海浪的特征和分布产生显著的影响,尤其是研究台风过程中海流与海浪的相互作用具有重要的研究意义。本文以ROMS海洋模式和SWAN海浪模式为基础,构建了浪流耦合模式系统,对2013年10月6-17日间的台风“丹娜丝”、“百合”、“韦帕”过程中西北太平洋浪流相互作用中海流对有效波高的影响进行了研究。通过对比模式模拟有效波高与浮标观测资料,发现耦合后的有效波高比非耦合结果更接近观测值,耦合模式中海流的存在对有效波高的分布有明显的影响。研究表明,特别是在有效波高峰值处,海流引起的有效波高增大最大可达1 m。海浪浪向及流向的空间分布以及中国近海浮标处浪向与流向的时间序列表明,流向与浪向反向时,海流的影响造成有效波高增大;二者同向时,有效波高减小。海流对有效波高的调整会沿着海浪传播的方向传播相当一段距离。在西北太平洋的海浪场计算中,引入海流的耦合模式计算结果对改善强流区海浪预报具有重要意义,并且海流的模拟精度对于高精度的海浪预报非常重要。     

台山核电邻近海域春秋季浮游植物群落结构特征

根据2013年4月(春季)和9月(秋季)2个航次调查数据,对台山核电邻近海域浮游植物种类组成、时空分布及多样性指数等群落特征进行了分析。共鉴定浮游植物3门61种,其中硅藻类48种,占78.69%;甲藻类11种,占18.03%;金藻类2种,占3.28%。种类组成以暖水种和广温种为主。浮游植物丰度均值春季(11.78×107个/m3)与秋季(29.37×107个/m3)无明显差异;然而丰度水平变化较大,整体表现为春秋两季核电站温排水口附近站位均低于远离站位。春秋两季浮游植物优势种共出现了7种,春季仅出现了中肋骨条藻Skeletonema costatum1种,优势度高达0.996;秋季出现了7种,包括中肋骨条藻(0.291)、柔弱拟菱形藻Pseudo-nitzschia delicatissima(0.222)、拟弯角毛藻Chaetoceros pseudocurvisetus(0.214)和并基角毛藻Chaetoceros decipiens(0.056)等。海域春季Shannon-Wiener多样性指数H′、Pielou均匀度指数J′和Margalef物种丰富度指数D均值分别为0.55、0.18和0.50;秋季分别为2.80、0.62和0.80。多样性指数显示台山核电附近海域水质状态受到了一定程度的污染。     

黄海海浪季节变化的数值模拟研究

利用第三代海浪数值模式SWAN,研究了黄海海浪有效波高的季节变化特征及相关的物理过程。结果表明,在黄海的大部分区域,混合浪有效波高的最大值出现在冬季,而最小值则基本出现在夏季。北黄海北部和山东半岛南岸的近海海域呈现稍微不同的季节变化,有效波高的最大值出现在春季。全年4个季节中混合浪有效波高的空间分布基本一致:均在济州岛西南最大,沿黄海中部区域向北和由中部区域向近岸区域逐渐减小。黄海海浪为风浪占主,涌浪有效波高远小于风浪有效波高。在黄海的大部分区域,白冠耗散和四波非线性相互作用对黄海海浪的季节变化均至关重要;对于外海区域,四波非线性相互作用更为重要,而对于近海区域,白冠耗散则影响更大。本研究旨在研究黄海海浪的季节变化特征及其物理过程,为进一步探讨该海域海浪在其他时间尺度上的变异特征和动力学过程提供研究基础。     

Effects of initial step height on the headcut erosion of bank gullies: a case study using a 3D photo-reconstruction method in the dry-hot valley region of southwest China

Abstract

Headcut erosion has been recognized as one of the main processes involved in gully development in the dry-hot valley region of southwest China. To examine the effect of initial step height on headcut erosion processes, three headcuts were constructed ranging in height from 0.75 to 1.25 m on an active bank gully head, and a series of scouring experiments were conducted under a flow discharge of 120 L min^?1. The morphological evolutions of the plunge pools and soil loss volume were estimated by three-dimensional photo-reconstruction methods (3D-PR). As the step height increased, the experimental results showed that: (1) the transformed potential energy and shear stress would increase by approximately 4.89 J s^?1 and 26.4 Pa on average when the step height increased 0.25 m; (2) the mean depth and width of the plunge pool exhibited obvious growth, and the morphology of the cross-section developed from approximately V-shaped to U-shaped; and (3) soil loss volume increased logarithmically, with total soil loss volumes of 0.076, 0.105 and 0.116 m³, respectively. Although the significant effects of the initial step height on headcut erosion were verified, further quantitative studies are required to quantify the mechanism of headcut erosion, especially for plunge pool erosion.     

Comparative analysis of significant wave height between a new Southern Ocean buoy and satellite altimeter

中国于2019年第35次南极考察中,首次在南大洋布放了锚系实时综合观测浮标(西风带海洋环境监测浮标,WEMB),为深入了解此海区的海洋环境变化提供了宝贵资料.国家海洋技术中心WEMB研究团队基于AVISO公开发布的多颗卫星高度计L3产品,通过数据配对,误差统计和最小二乘线性拟合等方法,对西风带海洋环境监测浮标的有效波高数据误差进行了分析与校正.校正后的浮标有效波高统计显示西风带常年处于大浪以上海况,观测期间内57％处于巨浪海况,并且伴随有高度相关的大风天气.     

Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.     

Main Detrainment Height of Deep Convection Systems over the Tibetan Plateau and Its Southern Slope

Deep convection systems (DCSs) can rapidly lift water vapor and other pollutants from the lower troposphere to the upper troposphere and lower stratosphere. The main detrainment height determines the level to which the air parcel is lifted. We analyzed the main detrainment height over the Tibetan Plateau and its southern slope based on the CloudSat Cloud Profiling Radar 2B_GEOPROF dataset and the Aura Microwave Limb Sounder Level 2 cloud ice product onboard the A-train constellation of Earth-observing satellites. It was found that the DCSs over the Tibetan Plateau and its southern slope have a higher main detrainment height (about 10?16 km) than other regions in the same latitude. The mean main detrainment heights are 12.9 and 13.3 km over the Tibetan Plateau and its southern slope, respectively. The cloud ice water path decreases by 16.8% after excluding the influences of DCSs, and the height with the maximum increase in cloud ice water content is located at 178 hPa (about 13 km). The main detrainment height and outflow horizontal range are higher and larger over the central and eastern Tibetan Plateau, the west of the southern slope, and the southeastern edge of the Tibetan Plateau than that over the northwestern Tibetan Plateau. The main detrainment height and outflow horizontal range are lower and broader at nighttime than during daytime.     

2018年常州一次罕见持续性雾-霾天气分析

利用常规气象观测资料、探空资料、污染物浓度及AQI资料、NCEP再分析资料等,对2018年11月24日至12月3日夜间常州持续11 d的强浓雾和严重霾天气过程进行了分析。结果表明：（1）此次雾-霾过程持续时间长、范围广、强度大、污染重。（2）中纬度地区高层持续纬向环流控制、中低层暖脊稳定存在,地面持续受均压场或弱倒槽顶部、弱冷锋前部影响,是这次持续性雾-霾过程的重要天气条件。（3）边界层内弱辐散、负涡度及弱的下沉气流是此次雾-霾天气得以长时间维持、发展的动力因子。近地层长时间水汽饱和且维持小风速利于雾-霾的长时间维持。（4）近地面高强度的贴地逆温长时间维持和持续较低的混合层高度是此次雾-霾形成、发展和长时间维持的重要热力条件。雾比霾的平均混合层高度明显偏低且霾等级越高混合层高度越低,混合层高度的变化先于能见度变化,对雾-霾临近预警有较好的指导作用。（5）弱冷空气渗透、风速适当增加、混合层高度的先期快速下降、负净辐射曝辐量绝对值的明显增大是雾爆发性增强的主要原因。