广西合浦海草床生态系统服务功能价值评估

海草床生态系统是生物多样性丰富和生产力高的近岸海洋生态系统,本文以广西合浦海草床为例,结合实地调查、已有的研究成果和当地统计资料,综合运用生态经济学、资源经济学等基本理论和方法,对该地区海草生态系统的服务功能进行了价值评估。结果表明2005年该地区海草生态系统的服务功能价值为6．29×105元／a·ha,其中间接利用价值最大,为4．47×105元／a·ha,占总经济价值的70．97％;其次为非利用价值,为1．54x105元／a·ha,占总经济价值的24．52％;最少的是直接利用价值为2．84×104元／a·ha,仅占总经济价值的4．51％。     

浅层物探技术在近海灾害地质与工程地质调查中的应用

随着海洋资源的开发与滨岸工程的建设,越来越多地遇到海洋地质灾害的影响与危害。为了避免并降低海洋地质灾害的影响程度,应开展海洋灾害地质与工程地质调查。二十多年来的实践经验表明,若采用以高分辨率地震为主,配合浅地层剖面、旁侧声纳、测深及磁力测量等综合浅层物探技术,对于了解海洋地质灾害因素与海底浅部工程地质特性等方面都能取得良好的效果,这是一种既经济又较快速地提供成果资料的好方法。     

钱塘江强潮河段江道缩窄治理研究

对钱塘江强潮河段江道缩窄治理进行研究。首先,回顾治理方案的比选,江道全线缩窄时河轴线线路和河道宽度的确定原则,以及不同河段的指数放宽率。然后,介绍了在涌潮汹涌、滩涂淤坍变化剧烈的强潮河段,实施筑堤所采取的工程措施的步序与要点。最后,分析论证了大规模江道缩窄治理后河床、潮汐、洪水位及涌潮高度等特征值的变化。可供进一步深入理论研究和工程施工参考运用。     

Adaptive Predictive Inverse Control of Offshore Jacket Platform Based on Rough Neural Network

The offshore jacket platform is a complex and time-varying nonlinear system,which can be excited of harmful vibration by external loads.It is difficult to obtain an ideal control performance for passive control methods or traditional active control methods based on accurate mathematic model.In this paper,an adaptive inverse control method is proposed on the basis of novel rough neural networks (RNN) to control the harmful vibration of the offshore jacket platform,and the offshore jacket platform model is established by dynamic stiffness matrix (DSM) method.Benefited from the nonlinear processing ability of the neural networks and data interpretation ability of the rough set theory,RNN is utilized to identify the predictive inverse model of the offshore jacket platform system.Then the identified model is used as the adaptive predictive inverse controller to control the harmful vibration caused by wave and wind loads,and to deal with the delay problem caused by signal transmission in the control process.The numerical results show that the constructed novel RNN has advantages such as clear structure,fast training speed and strong error-tolerance ability,and the proposed method based on RNN can effectively control the harmfid vibration of the offshore jacket platform.     

A traversing system to measure bottom boundary layer hydraulic properties

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.     

Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

利用TOPEX卫星高度计资料分析台湾岛周边海域巨浪和大风特征

卫星高度计实现了对全球性或区域性的海洋参量的实时监测,TOPEX卫星高度计提供了迄今为止时间序列最长、数据质量最高的全球海面风速和有效波高的同步观测资料。利用TOPEX卫星高度计资料,分析了有效波高4m以上的巨浪在台湾岛周边海域的时空分布特征,结果表明台湾岛周边海域巨浪的分布具有明显的季节特征。每年平均有效波高最大值大多数出现在夏季,春季是1a中有效波高最小的季节,而秋季和冬季是巨浪出现频率最高的季节。波高大于6m的巨浪大都出现在台湾岛东部及东北部海域,在南部海域出现较少。     

弱地形上内潮生成问题——Ⅱ.粗糙地形情况下水深对内潮能通量的影响

前人在讨论水深对内潮能通量影响的时候得出结论:有限深海洋中海面对内潮的反射使得正压潮向内潮的能量转化相比较无限深海的情况显著降低,对于选定的地形,在无限深海假定下得到的能通量是该地形上内潮能通量的上限。鉴于前人所研究的基本上都是平滑的地形,而实际的海洋地形总是比较粗糙的,本文探讨了粗糙地形上内潮能通量随水深的变化。选取了弦函数地形、随机白噪声地形、弦函数地形叠加在高斯地形之上、随机白噪声地形叠加在高斯地形之上和随机白噪声地形与弦函数地形同时叠加在高斯地形之上5种情况进行了研究,发现对于这5种情况,都存在海洋有限深时的能通量大于无限深假定时的能通量,这说明前人得出的"有限深海洋中海面对内潮的反射使得正压潮向内潮的能量转化相比较无限深海的情况显著降低"的结论对于粗糙地形并不适用。     

海洋动床物理模型试验地形制作技术

试验模型地形制作是物模试验的一个基本工作,模型制作的好坏直接关系到实验的精度.模型试验之前,需要根据相似理论,选取合适的材料,按照一定的几何比尺进行模型的制作.通过2个具体工程作为实例说明了模型制作的过程、制作的技术性问题和制作经验.     

Numerical modeling of nonlinear water waves over heterogeneous porous beds

The transformation of nonlinear water waves over porous beds is studied by applying a numerical model based on Chen's [2006. Fully nonlinear Boussinesq-type equations for waves and currents over porous beds. Journal of Engineering Mechanics, 132:2, 220–230] Boussinesq-type equations for highly nonlinear waves on permeable beds. The numerical model uses a high-order time-marching solution and fourth-order finite-difference schemes for discretization of first-order spatial derivatives to obtain a computational accuracy consistent with the model equations. By forcing the wave celerity and spatial porous-damping rate of the linearized model to match the exact linear theory for horizontal porous bed over a prescribed range of relative depths, the values of the model parameters are optimally determined. Numerical simulations of the damped wave propagation over finite-thickness porous layer demonstrate the accuracy of both the numerical model and governing equations, which have been shown by prior theoretical analyses to be accurate for both nominal and thick porous layers. These simulations also elucidate on the significance of the higher-order porous-damping terms and the influence of the hydraulic parameters. Application of the model to the simulation of the wave field around a laboratory-scale submerged porous mound provides a measure of its capability, as well as useful insight into the scaling of the porous-resistance coefficients. For application to heterogeneous porous beds, the assumption of weak spatial variation of the porous resistance is examined using truncated forms of the governing equations. The results indicate that the complete set of Boussinesq-type equations is applicable to porous beds of nonhomogeneous makeup.