水动力作用下管道稳定性的试验研究

利用振荡流水槽在以下两种约束条件下，研究波浪作用下直接铺设于砂质海底的管道失稳临界条件：1）管道两端自由；2）管道可水平、垂直自由运动，但流动受到限制。试验结果表明，管重无量纳数G与管道失稳的临界Fr数之间大致呈线性关系，而当G超过一定数值时，管道是侧向稳定的。管道的约束条件、砂床特性和加载速度对管道稳定性均有影响。     

流形上的空间密度聚类算法研究

研究流形上的聚类分析，针对基于密度的空间聚类引入了流形概念，提出1种基于流形的密度聚类算法，该方法将流形的概念与聚类相结合，可以适用于样本为复杂分布的聚类。文中通过实例证明此算法的有效性。     

The impact of salt water inflows on the distribution of polycyclic aromatic hydrocarbons in the deep water of the Baltic Sea

Salt-water inflows into the Baltic Sea are important events for renewing the deep and bottom waters of the deep basins of the Baltic Sea. These events occur only at irregular intervals. The last strong event was in January 1993 followed by minor inflows in winter 1993/1994. As a result of these inflows, the deep water of the central Baltic basins was completely renewed.Based on extensive observations of polycyclic aromatic hydrocarbons (PAHs) in water, fluffy layer material and surface sediments between 1992 and 1998, the transformation of PAHs and the modification of their distribution in the Baltic deep water is discussed in connection with the spreading of the inflowing highly saline and oxygen-rich water along its pathway from the sills into the central basins. In the course of the inflows in 1993/1994, the PAH concentration in the deep water of the different basins increased significantly. The concentrations were elevated, at least by a factor of 2 and as much as seven to eight times (for the four-ring PAHs) compared to the previous and the following years. Two hypotheses for the causes were discussed: the inflowing salt water may have entrained more highly polluted surface water in the western Baltic Sea, or it may have entrained contaminated fluffy layer material or sediment particles along the route of transport.     

A new efficient 3D non-hydrostatic free-surface flow model for simulating water wave motions

A new three-dimensional, non-hydrostatic free surface flow model is presented. For simulating water wave motions over uneven bottoms, the model employs an explicit project method on a Cartesian the staggered gird system to solve the complete three-dimensional Navier–Stokes equations. A bi-conjugated gradient method with a pre-conditioning procedure is used to solve the resulting matrix system. The model is capable of resolving non-hydrostatic pressure by incorporating the integral method of the top-layer pressure treatment, and predicting wave propagation and interaction over irregular bottom by including a partial bottom-cell treatment. Four examples of surface wave propagation are used to demonstrate the capability of the model. Using a small of vertical layers (e.g. 2–3 layers), it is shown that the model could effectively and accurately resolve wave shoaling, non-linearity, dispersion, fission, refraction, and diffraction phenomena.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

欧式鳕鱼排的研制

以鳕鱼为原料 ,经过鱼糜制作、调味、速冻、切片、浸液、沾粉、二次速冻等工艺研制开发了欧式鳕鱼排。探讨了原、辅料和漂洗条件对产品质量的影响 ,测定了评价产品质量的感官、理化和微生物指标。     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

地震勘探在不同地质条件下的新应用

20世纪末，地震勘探技术在油气勘探、煤田勘探、工程勘探等多方面的应用都有了突飞猛进的发展。总结了近年来地震勘探在岩性、沉积相、构造体系等不同地质条件下的应用实例，用以说明地震勘探的多用性及其强大的生命力。