基于GIS技术的综合水文物探数据库系统研究

利用GIS的强大空间数据架构功能，将各类水文物探数据与空间数据相关联，建立了基于GIS技术的综合水文物探系统。水文物探数据量大，而且复杂多变，本系统利用新兴的GIS技术和数据库功能对水文物探属性数据与空间数据进行有效的整合，高效地管理空间与属性数据，实现了图形编辑、空间分析、数据的查询与统计、专题图绘制、以及数值模拟等功能。利用本系统可对图形进行空间处理分析，对各类数据进行各种查询，实现图形和数据的互动，并对所获得的数据制作各种专题图，并且通过数值模拟具体、直观的再现观测实体的空间位置与相应的属性，为综合预测与评估提供科学依据。     

北方某城市浅层地下水中有机污染物迁移转化的数值模拟研究

在3次野外取水样分析的基础上，分析了研究区域有机污染特征，并根据室内实验和国内外文献资料所获取的参数，利用地下水模拟系统软件（GMS）对研究区三氯乙烯（TCE）和四氯乙烯（PCE）在地下水中的运移转化进行数值模拟研究，模拟结果表明：研究区地下水中TCE和PCE存在生物降解作用，但是反应速率很小，这表明在相当长的时间内，其浓度仍可能保持在相当的水平上。     

条带开采煤柱稳定性的试验模拟与数值分析——以山东省济宁市太平煤矿为例

以山东省济宁市太平煤矿为例，采用煤柱模拟试验和数值分析手段，对薄基岩条带开采时所留设煤柱的应力应变状态、煤柱强度结构及煤柱长期稳定性进行了深入的分析与研究，揭示了煤柱稳定性及煤柱应力分布与条采尺寸、采出率、覆岩特征的相互关系，进行了条带煤柱的稳定性评价，为工程实践提供了理论依据。     

长江下游一次大暴雨的中尺度模拟分析

运用中尺度数值模式（MM5V3.6）对2004年6月25日长江下游地区一次大暴雨天气过程进行了数值模拟,结合天气形势和卫星云图对此次过程进行了分析.结果表明：在东北冷涡和西太平洋副热带高压两大天气尺度系统的作用下,西南低空急流的再次加强和中低层切变线共同作用是此次大暴雨过程的主要原因.螺旋度分析表明,在不均匀的强上升气流的作用下,涡旋的水平分量向垂直分量转化是此次强降水的可能机制之一.     

2005年8月21日桂西大暴雨天气分析与降水模拟

利用常规、红外云图、雷达资料对2005年8月21日发生在桂西的大暴雨天气过程进行诊断分析,发现造成桂西这次强降雨主要直接影响系统来自低层切变线、高空低槽和地面静止锋。低层切变线是引发此次强降水的主要系统。低层低涡是在桂西强降水发生后才逐渐发展起来的。采用非静力中尺度数值模式(MM 5)对这次大暴雨过程进行初步模拟试验,结果表明模式对这次强降水的雨带分布、暴雨中心强度及其位置的模拟也与实况较为接近。     

Observations And Modelling Of The On-Ice And Off-Ice Air Flow Over The Northern Baltic Sea

Two cases of on-ice and off-ice air flow characterizing the opposite weather situations over the ice-edge zone in the northern Baltic Sea are analysed on the basis of aircraft observations, and modelled using atwo-dimensional mesoscale model. The stable boundary layer (SBL) during theon-ice flow exhibited little thermal modification, but a low-level jet (LLJ) was generated at the 250-m high top of the SBL. In the model, the LLJ was associated with inertial oscillations in space, while the baroclinicity explained the shape of the wind profile well above the SBL. Although the observed LLJ was most pronounced over the ice, the modelling suggests that it was not generated by the ice edge but by the coastline some 400 km upwind of the ice edge, where a much more drastic change in the thermal stratification and surface roughness took place. The generation, maintenance, and strength of the LLJ were very sensitive to the parameterization of turbulent mixing in the SBL. In the case of the off-ice flow, the modification of the air mass and the development of a convective boundary layer (CBL) both over the ice and open sea were reasonably well modelled. Sensitivity runs suggested that it was essential to take into account the effects of subgrid-scale leads, a forest in the archipelago (which was crossed by the air flow), and water vapour condensationinto ice crystals. The heat flux from leads was particularly important for the heatbudget of the CBL, and the observed growth of the CBL was partly due to theeffective mixing over the rough and relatively warm forest.     

FLAC数值模拟软件及其在地学中的应用

FLAC是以拉格朗日差分法为基础的一种数值模拟应用软件,主要用于岩土力学工程。近年地质学家将其应用到地质构造和块体运动学、动力学研究中,以证实或证伪地球学家们提出的相关地球动力学模型。本文初步介绍了FLAC应用软件的基本原理、使用方法以及它在国内外地质学上的几个应用实例。     

An integrated hydrological model for rain‐induced landslide prediction

This paper describes an extension to the Combined Hydrology And Stability Model (CHASM) to fully include the effects of vegetation and slope plan topography on slope stability. The resultant physically based numerical model is designed to be applied to site‐specific slopes in which a detailed assessment of unsaturated and saturated hydrology is required in relation to vegetation, topography and slope stability. Applications are made to the Hawke's Bay region in New Zealand where shallow‐seated instability is strongly associated with spatial and temporal trends in vegetation cover types, and the Mid‐Levels region in Hong Kong, an area subject to a variety of landslide mechanisms, some of which may be subject to strong topographic control. An improved understanding of process mechanism, afforded by the model, is critical for reliable and appropriate design of slope stabilization and remedial measures. Copyright © 2002 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.