Preparation of a geotechnical microzonation model using Geographical Information Systems based on Multicriteria Decision Analysis

The purpose of this study is to develop a geotechnical microzonation model using Geographical Information Systems (GIS) based on Multicriteria Decision Analysis (MCDA). As study area, the Eskişehir downtown area has been chosen. Eskişehir is one of the most rapidly growing cities in central Turkey. The model inputs include slope, flood susceptibility, soil, depth to groundwater table, swelling potential, and liquefaction potential. The weight and rank values are assigned to the layers and to the classes of each layer respectively. The assignment of the weight/rank values and the analysis are realized by the application of two different decision models, namely Simple Additive Weighting (SAW) and Analytic Hierarchy Process (AHP) methods. The geotechnical microzonation maps prepared as outputs of these methods are found to be consistent with each other and confirmed by the experts within the study area. The geotechnical microzonation map prepared using the AHP method is recommended as the final map of the study.     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

Assessment of sand encroachment in Kuwait using GIS

Assessment of sand encroachment in Kuwait using Geographical Information System (GIS) technology has been formulated as a Multi-Criteria Decision Making problem. The Delphi method and Analytical Hierarchy Process were adopted as evaluating techniques, in which experts’ judgments were analyzed for objectively estimating and weighting control factors. Seven triggering factors, depicted in the form of maps, were identified and ordered according to their priority. These factors are (1) wind energy; (2) surface sediment; (3) vegetation density; (4) land use; (5) drainage density; (6) topographic change and (7) vegetation type. The factor maps were digitized, converted to raster data and overlaid to determine their possible spatial relationships. Applying a susceptibility model, a map of sand encroachment susceptibility in Kuwait was developed. The map showed that the areas of very high and high sand encroachment susceptibility are located within the main corridor of sand pathway that coincides with the northwesterly dominant wind direction.     

Experimental and numerical studies of rock salt strain hardening

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.     

长江口水域多光谱遥感水深反演模型研究

利用Landsat-7 ETM 遥感影像反射率和实测水深值之间的相关性可以探测水深。该文介绍单波段、双波段比值和多波段3种线性回归模型以及动量BP人工神经网络水深反演模型。选择长江口北港河道上段作为研究区,利用上述模型,分两种情况进行水深反演:一是以河道全部历史样本建模;二是将河道按自然水深划分为浅水区和深水区分别建模。结果表明:神经网络模型预测精度高于线性回归模型;水深分区后线性回归和神经网络模型预测误差均有所减小。     

宁夏产业结构演进与经济增长系统研究

产业结构的演进与升级一定程度上反映了区域经济的发展阶段与发展能力。以1978-2003年的统计数据为基础,系统研究了宁夏产业结构变迁与区域经济发展的关系。研究结果表明:(1)宁夏产业结构的变化符合产业结构变迁的一般规律,但产业结构高度化水平依然低下;(2)宁夏产业结构变迁的空间集聚效应明显;(3)宁夏产业结构演进对经济增长的影响形成产业结构偏离为正,竞争力偏离份额为负型、产业结构偏离为正,竞争力偏离份额为正型和产业结构偏离为负,竞争力偏离份额为正型三种类型;(4)产业结构变迁对各地区经济增长的影响差异较大。研究指出,在西部大开发和区域经济一体化进程中,以及在国家和地区产业政策调整的背景下,建立产业协调与分工合作机制,发展特色优势产业,推进重点地带布局开发,形成区域性“群落型”经济优势,成为新时期宁夏产业结构调整的战略选择。     

Modelling net erosion responses to enviroclimatic changes recorded upon multisecular timescales

Land use change has been recognized throughout the Earth as one of the most important factors influencing the occurrence of rainfall-driven geomorphological processes. However, relating the occurrence of historical soil erosion rates is difficult because of the lack of long-term research projects in river basins. Also, complex models are not adequate to reconstruct erosion rate changes because they require significant input data not always available on long timescales. Given the problems with assessing sediment yield using complex erosion models, the objective of this study is to explore a parsimonious scale-adapted erosion model (ADT) from the original Thornes and Douglas algorithms, which aims at reconstruction of annual net erosion (ANE) upon multisecular timescales. As a test site, the Calore River basin (3015 km² in southern Italy) provides a peculiar and unique opportunity for modelling erosion responses to climate and land cover changes, where input-data generation and interpretation results were also supported by documented hydrogeomorphological events that occurred before and after land deforestation. In this way, ANE_ADT-values were reconstructed for the period 1675–2004 by using precipitation indexes, complemented by recent instrumental records, and by using land cover statistics from documented agrarian sources. Pulses of natural sedimentation in the predeforestation period have been related to Vesuvius volcanic activity and changes in rainstorm frequency. After deforestation, the basin system became unstable with sudden fluctuations in the hydrogeomorphological regime contributing significantly to increased erosion and, in turn, sediment transport sequences via river drainage towards the Tyrrhenian coast.     

A simple hypoplastic model for normally consolidated clay

The paper presents a simple constitutive model for normally consolidated clay. A mathematical formulation, using a single tensor-valued function to define the incrementally nonlinear stress–strain relation, is proposed based on the basic concept of hypoplasticity. The structure of the tensor-valued function is determined in the light of the response envelope. Particular attention is paid towards incorporating the critical state and to the capability for capturing undrained behaviour of clayey soils. With five material parameters that can be determined easily from isotropic consolidation and triaxial compression tests, the model is shown to provide good predictions for the response of normally consolidated clay along various stress paths, including drained true triaxial tests and undrained shear tests.