Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.     

Calibration of paired watersheds: Utility of moving sums in presence of externalities

Historically, paired watershed studies have been used to quantify the hydrological effects of land use and management practices by concurrently monitoring 2 similar watersheds during calibration (pretreatment) and post‐treatment periods. This study characterizes seasonal water table and flow response to rainfall during the calibration period and tests a change detection technique of moving sums of recursive residuals (MOSUM) to select calibration periods for each control–treatment watershed pair when the regression coefficients for daily water table elevation were most stable to minimize regression model uncertainty. The control and treatment watersheds were 1 watershed of 3–4‐year‐old intensely managed loblolly pine (Pinus taeda L.) with natural understory, 1 watershed of 3–4‐year‐old loblolly pine intercropped with switchgrass (Panicum virgatum), 1 watershed of 14–15‐year‐old thinned loblolly pine with natural understory (control), and 1 watershed of switchgrass only. The study period spanned from 2009 to 2012. Silvicultural operational practices during this period acted as external factors, potentially shifting hydrologic calibration relationships between control and treatment watersheds. MOSUM results indicated significant changes in regression parameters due to silvicultural operations and were used to identify stable relationships for water table elevation. None of the calibration relationships developed using this method were significantly different from the classical calibration relationship based on published historical data. We attribute that to the similarity of historical and 2010–2012 leaf area index on control and treatment watersheds as moderated by the emergent vegetation. Although the MOSUM approach does not eliminate the need for true calibration data or replace the classic paired watershed approach, our results show that it may be an effective alternative approach when true data are unavailable, as it minimizes the impacts of external disturbances other than the treatment of interest.     

基于光谱角匹配算法的水体信息提取研究

针对水体信息提取时,传统算法不能较好地解决山体阴影被误提为水体的问题,引入多用于高光谱数据处理的光谱角匹配算法,以Land-sat8 OLI(band1-band7)为数据源,以黄河小浪底水库周边区域为实验区,开展水体信息提取研究,结果显示:水体指数法和波段关系提取的结果中有大量的山体阴影信息,提取精度不超过30%,而光谱角匹配法提取结果受阴影的影响较小,提取精度在99%以上。     

基于NGM(1,1,k,c)模型和改进切线角的危岩变形预测

针对危岩变形预测问题,本文以非齐次指数序列的灰色模型(NGM)作为危岩变形预测的基本模型,通过对望霞危岩变形的分析结果显示,NGM(1,1,k,c)模型拟合效果明显优于GM(1,1)模型,说明危岩变形趋势更接近于非齐次指数序列。利用NGM(1,1,k,c)模型结合改进切线角可对危岩变形趋势进行分析预测,可作为危岩稳定性和发展趋势的评估依据。     

国产机载LiDAR系统安置角误差检校方案研究

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。     

城市点云的区域生长三角网构建方法

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。     

Response of low‐angle dunes to variable flow

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.     

Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

顾及拓扑与尖角的分类矢量数据分组压缩算法

针对现有拆分重组法对存在复杂内环以及复杂相交岛屿多边形的分类矢量数据的压缩结果中包含裂缝、重叠及大量尖锐夹角的问题,提出了一种顾及拓扑一致性与尖角的分组压缩方法。依据分类矢量数据中多边形与多边形及其内环的相交关系对矢量矢量数据分组,以修正后拆分重组法结合直接分割法和间接分割法对分类矢量数据分组压缩,压缩结果中不存在裂缝与重叠现象,维护了分类矢量数据的拓扑一致性;通过取回尖角点前后被删除的点,解决了压缩结果中尖角过多的问题。以Landsat8遥感影像分类矢量数据实验验证了文章算法,并与直接分割法、间接分割法、拆分重组法进行了对比分析,验证了本文方法的有效性。     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.