Mountain Protection Forests against Natural Hazards and Risks: New French Developments by Integrating Forests in Risk Zoning

Forests can play a very significant role in protection against natural hazards and risks in mountain lands, especially against erosion and rockfalls. This paper first assesses knowledge concerning the capacity of forests to control natural hazards, with emphasis placed on forest location in catchments or slopes. Zoning aspects are then presented; based on the use of GIS, they allow determining priorities for forestry operations (cuts and biological engineering), in view to setting up an 'optimal management' of mountain forest ecosystems. Finally, an explanation is given of how the results of research are used for the management and planning of mountain ecosystems, illustrated by an example of researcher-practitioner transfer in France. Zoning, prevention, display and regular aspects are developed. On the basis of the experience and knowledge presented here, recommendations are proposed to better take into account the role of mountain forests in the control of natural hazards and risks. It is necessary to have an adapted legislative and economic framework, define priority forest intervention zones and determine an adapted sylviculture.     

重庆石碗溪小流域坡度和高程对土地利用及经济发展的影响

坡度和高程是土地资源固有的两个重要环境因子,与土地利用关系密切,尤其是在山区,坡度和高程基本上决定了土地利用的方向和方式,从而影响农业和经济的发展。石碗溪小流域面积20.73km2,为丘陵低山区。按坡度和高程对土地利用的影响程度,把坡度和高程各分为3级,即:0°～15°、15°~25°、>25°和500m以下、500~800 m、800m以上。从1:10 000地形圈上提取土地坡度和高程分级图,与土地利用现状图又叠加,获取各坡度、高程级及其土地利用类型和数据。结果表明,土地面积随坡度、海拔级的增加而加大。耕地分布在各个高程级0～15°的缓坡上,800m以上地区面积最大,果园和森林大多分布在800m以上>25°的陡坡地上。通过分析比较小流域各个行政村2002年农业总收入及种植业、林业、牧业收入与坡度和高程的关系,可以看出坡度和高程对经济发展的影响。最后,根据坡度和高程状况,结合小流域社会经济条件,提出几点建议,以其为山区小流域土地可持续利用及经济持续发展提供科学依据。     

金沙江流域(云南境内)山地灾害危险性评价

云南境内的金沙江流域是斜坡不稳定的敏感区,根据1988-2000年的区域调查和统计,区内发育山地灾害点1697处,其中流域面积大于1km2的泥石流沟808条,体积大于1×104m3的滑坡580处,体积大于1000m3的崩塌309处。用于山地灾害危险性评价的主要敏感因子包括岩土体类型、山坡坡度、降雨、土地利用、地震烈度和人类活动。在对这些因子进行了敏感性评价的基础上,应用GIS对敏感因子集成评价而产生了云南金沙江流域山地灾害危险性评价图。评价结果表明:高危险区面积占全区面积6464km2的8 77%,中危险区占全区总面积的41 51%,低危险区占41 12%,无危险区占8 60%。山地灾害危险性评价图可以帮助规划者或工程师在土地发展规划中选择最佳建设场所,以减轻灾害的影响。     

乌拉苔草光合速率日变化及日同化量

乌拉苔草沼泽是长白山沟谷湿地的重要类型 ,对其光合速率研究的结果表明 ,乌拉苔草光合速率日变化呈单峰曲线 ,最高峰出现在 1 0时 ,最大值是 1 8.0 7μmol(CO2 ) / (m2 ·s) ;与其该群落伴生的修氏苔草光合速率日变化出现“午休”现象。影响光合速率最大的环境因素是光量子通量密度和叶温 ,呈极显著的正相关 ,其他因素亦多呈正相关 ,环境因子综合影响了乌拉苔草的光合日进程。乌拉苔草光合作用的日总同化量为 1 896 0 1 .2 μmol(CO2 ) /m2 ,是光合能力较强的一种沼泽植物     

InSAR用于南极测图的可行性研究

利用1996年ERS-1／2tandem方式的雷达影像数据进行了生成Grove山数字高程模型的试验研究，并与实测的DEM进行比较分析，论证了利用InSAR技术进行南极测图的可行性。试验证明，在南极研究中，InSAR是一种非常有效的手段，不仅可用于地图制图，而且在冰川动力学、冰貌环境变化等研究领域也有巨大的潜力。     

Self-affinity dimensions of topography and its implications in morphotectonics: an example from Taiwan

This paper discusses the self-affinity dimensions of landscape surfaces at a short-range scale and the link to morphotectonic features of the young orogenic belts of Taiwan. The variogram method is adopted to estimate such parameters as the fractal dimension (D), the ordinate-intercept (γ) and the range (R) from data subsets of the digital elevation model (DEM) in a moving-window operation. The fractal morphology expressed by D and γ is found to be useful in defining geomorphic provinces that are related to tectonic features. The mountainous terrain is characterized by high gamma values and low fractal dimensions in contrast to the coastal plains where low gamma values and high fractal dimensions are found. A zone, defined by the fractal parameters (2.4<D<2.6 and 0<γ<2.4), is found to coincide with the most tectonically active zone of Taiwan. Active faults often occur at the boundary between landscapes with contrasting fractal patterns. In the flat lowlands along the western coast, the fractal morphology displays a west-facing amphitheatric pattern, which may be related to the indentation of the pre-Miocene Peikang Basement High. The fractal morphology may reflect some subtle changes in surface textures of a landscape sculpted by surface processes, which in turn are influenced by tectonic activities. The surface roughening and diffusive smoothing may concur to shape the landscape surface at the short ranges we discuss in this study.     

Wood storage in a wide mountain river: case study of the Czarny Dunajec,Polish Carpathians

Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha^?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

Methods for the visualization of digital elevation models for landform mapping

Digital elevation models (DEMs) are increasingly used for landform mapping, particularly with the growing availability of national and global datasets. In this paper we describe a variety of techniques that can visualize a DEM. We then compare five techniques to ascertain which performs the most complete and unbiased visualization. We assess the visualization techniques by comparing landforms mapped from them against a detailed morphological map (derived from mapping of multi‐azimuth relief‐shaded DEMs cross‐checked with stereo aerial photographs). Results show that no single visualization method provides complete and unbiased mapping. The relief‐shaded visualizations are particularly prone to azimuth biasing, although they can highlight subtle landforms. We recommend curvature visualization for initial mapping as this provides a non‐illuminated (and therefore unbiased) image. Initial mapping can then be supplemented with data from relief‐shaded visualizations. Copyright © 2005 John Wiley & Sons, Ltd.     

DEM-based morphometry of range-front escarpments in Attica, central Greece, and its relation to fault slip rates

In this paper, we apply current geological knowledge on faulting processes to digital processing of Digital Elevation Models (DEM) in order to pinpoint locations of active faults. The analysis is based on semiautomatic interpretation of 20- and 60-m DEM and their products (slope, shaded relief). In Northern–Eastern Attica, five normal fault segments were recognized on the 20-m DEM. All faults strike WNW–ESE. The faults are from west to east: Thriassion (THFS), Fili (FIFS), Afidnai (AFFS), Avlon (AVFS), and Pendeli (PEFS) and range in length from 10 to 20 km. All of them show geomorphic evidence for recent activity such as prominent range-front escarpments, V-shaped valleys, triangular facets, and tilted footwall areas. However, escarpment morphometry and footwall geometry reveal systematic differences between the “external” segments (PEFS, THFS, and AVFS) and the “internal” segments (AFFS and FIFS), which may be due to mechanical interaction among segments and/or preexisting topography. In addition, transects across all five escarpments show mean scarp slope angles of 22.1°±0.7° for both carbonate and metamorphic bedrock. The slope angle equation for the external segments shows asymptotic behaviour with increasing height. We make an empirical suggestion that slope angle is a function of the long-term fault slip rate which ranges between 0.13 and 0.3 mm/yr. The identified faults may rupture up to magnitude 6.4–6.6 earthquakes. The analysis of the 60-m DEM shows a difference in fault patterns between Western and Northern Attica, which is related to crustal rheology variations.