黑潮延伸体上游中尺度涡场的年代际振荡及其相关机制

黑潮延伸体上游区域的中尺度涡场的涡动能和涡特征尺度存在显著地年代际振荡,和黑潮延伸体路径的年代际变化有很好的相关性。当黑潮延伸体路径比较稳定时,其上游区域涡动能比较高,涡特征尺度比较大,反之相反。通过对黑潮延伸体上游区域的中尺度涡场进行集合分析发现:当黑潮延伸体处于稳定状态时,上游涡场几乎是各向均匀地,有轻微的径向伸长;而当黑潮延伸体处于不稳定状态时,上游的中尺度涡场有显著地纬向伸长。对与中尺度涡场的产生相关的线性斜压不稳定和正压不稳定进行了计算分析,结果显示,线性斜压不稳定不是控制中尺度涡场年代际变化的机制,而正压不稳定对中尺度涡场的年代际变化有积极的贡献。不稳定产生的中尺度涡之间存在非线性涡-涡相互作用。     

Seismic attenuation estimation using a complete ensemble empirical mode decomposition-based method

The frequency attenuation gradient method can provide important information for hydrocarbon detection. In this paper, a method using Complete Ensemble Empirical Mode Decomposition (CEEMD), Hilbert transform and the least-squares curve-fitting is proposed for seismic attenuation estimation as an effective frequency attenuation gradient estimation approach. We first use CEEMD to obtain the different Intrinsic Mode Functions (IMFs), which have a narrow band and can enhance the physical meaning of instantaneous attributes trace by trace. The time-frequency spectrum, which is computed using a Hilbert transform of each IMF, is represented as a spectrum with a single-peak that has narrow side lobes, which is conducive to frequency attenuation gradient estimation. Second, for each time sample, the frequency-amplitude spectrum of each IMF trace is extracted from the time-frequency spectrum to conduct the attenuation gradient computation. Then, the logarithm operation is performed for each IMF trace. Due to the very narrow bands of some IMFs in some seismic traces, a variable frequency window is adopted along the IMF trace according to the local data characteristics. Finally, the attenuation gradient for each IMF in a seismic trace can be computed using least-squares fitting. A different IMF reflects a seismic trace with a different spatiotemporal scale and can highlight different geologic and stratigraphic information. The correlation weighted average operation is used to highlight some useful details in seismic trace and obtains the attenuation gradient for each seismic trace. Field data examples demonstrate our method and its effectiveness. The proposed method can stably estimate the frequency attenuation gradient.     

腐蚀管道在内压和轴向压力影响下的弯曲破坏

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。     

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.     

基于稳态碎岩方式的PDC钻头设计分析研究

自从20世纪80年代PDC复合片研发成功以来,PDC钻头由于其钻进性能强和耐磨性能好,在世界许多国家的石油钻井和地质勘探中得到了广泛应用,取得了很好的效果。但是,如何进一步提高其在钻探工程中的技术经济指标是一个很迫切的问题。俄罗斯博士Скоромных В. В.教授等对此进行多年研究,提出了稳态破碎岩石方式的思想,即在轴载和扭矩切力形成的合力R与切削面成垂直角度条件下,切入深度h不变时形成的一种碎岩方式。并在此基础上提出了一些设计PDC钻头方面的建议。     

粉煤灰基地质聚合物水热原位转化NaP型沸石分子筛的研究

以固体废弃物粉煤灰基地质聚合物为基本骨架,通过水热合成法将其原位转化为自支撑Na P型沸石分子筛型体,并研究了水热过程中碱液浓度、碱液体积、水热温度和水热时间对NaP型沸石分子筛结晶程度、形貌和机械强度的影响,得到粉煤灰基地质聚合物原位转化Na P型沸石分子筛型体的适宜条件为水热温度100℃、NaOH浓度2.0mol/L、NaOH体积50 m L、水热时间24 h。所得Na P型沸石分子筛型体的抗压强度为23.21 MPa,BET比表面积为50.46 m~2/g,已达到工业生产P型沸石的水平。该法工艺简单,环境友好,可控成型。在此方法的基础上通过改变原料配比和反应条件,可以合成其他类型的沸石分子筛型体。     

开挖条件下含陡倾结构面顺层岩质边坡破坏模式与稳定性预测

顺层岩质边坡易发生失稳破坏,当边坡中发育有顺坡向陡倾结构面时,更不利于边坡稳定。以贵州某水电站大坝左岸含陡倾结构面顺层边坡为例,在综合分析地质条件及开挖扰动的基础上,结合离散元软件UDEC,分析了边坡的变形破坏模式和稳定性。研究结果表明,边坡可能发生的变形破坏模式主要有滑移、拉裂—滑移两种;自然状况下及开挖后,边坡都有沿断层f_9、卸荷裂隙L_1及岩层面发生滑移的趋势,且工程开挖导致边坡沿该结构面发生内部滑动;对边坡采用预应力锚索加固后,变形得到有效控制,位移数值计算值与实际监测值基本吻合。     

落石冲击混凝土板与缓冲层组合结构的动力响应

钢筋混凝土（RC）板与一定厚度的土颗粒缓冲层组合结构被广泛用于山区高位单体及群发性崩塌落石的防治,为研究此类防护结构在落石作用下的冲击力衰减规律及RC板的破坏模式,开展了室外系列落石冲击试验。结果表明,增大缓冲层厚度能够有效减小最大冲击力,峰值加速度随缓冲层厚度减小而增大,尤其在缓冲层厚度为0.1 m及0.2 m时,最大值急剧增大,峰值加速度与缓冲层厚度的变化满足指数函数关系;根据量纲分析原理得到缓冲层最大冲击深度与动能的平方成正比、与最大入射冲击力成反比的计算公式,且与实测值较吻合;入射冲击力在缓冲层内的衰减率随缓冲层厚度的增加以指数函数递增,在0.6 m缓冲层厚度下可使峰值冲击力衰减70%左右;随累积冲击能级的增大,RC板经历了弯曲起裂及扩展、次级弯曲裂纹和剪裂纹产生及跨中弯曲裂纹贯通的过程,试验结束时RC板整体表现出典型的弯曲破坏特征。     

基于优化经验模态分解和聚类分析的滑坡位移智能预测研究

针对三峡库区"阶跃式"滑坡的变形特征,提出了一种新的滑坡位移预测方法。以白水河滑坡ZG118和XD-01监测点位移数据为例,采用基于软筛分停止准则的经验模态分解(SSSC-EMD)将累计位移-时间曲线和影响因子时间序列自适应地分解为多个固有模态函数(IMF),并采用K均值(K-Means)聚类法对其进行聚类累加,得到有物理含义的位移分量(趋势性位移、周期性位移以及随机性位移)和影响因子分量(高频影响因子和低频影响因子)。使用最小二乘法对趋势性位移进行拟合预测;采用果蝇优化-最小二乘支持向量机(FOA-LSSVM)模型对周期性位移和随机性位移进行预测。将各位移分量预测值进行叠加处理,实现滑坡累计位移的预测。研究结果表明,所提出的(SSSC-EMD)-K-Means-(FOA-LSSVM)模型能够预测"阶跃式"滑坡的位移变化规律,且预测精度高于传统的支持向量机回归(SVR)、最小二乘支持向量机(LSSVM)模型;并通过改变训练集长度,进行单因素分析,发现其与预测精度之间呈正相关关系。     

Three-dimensional publication mode of Journal of Palaeogeography(Chinese Edition)

The network technology has provided impetus and channels for the development of sci-tech periodicals and promoted the transformation of the publication mode of Journal of Palaeogeography(Chinese Edition). Through the independent website construction,providing readers with diversified access to articles,diversified communication methods,personalized accurate article push,joining the OSID open science program,etc.,a three-dimensional publication mode adapted to the development of periodicals has been gradually formed.