胡安·德富卡洋脊因代沃段热液黑烟囱体成矿物质来源:硫同位素的限制

选取胡安.德富卡洋脊(Juan de Fuca Ridge,JDFR)因代沃(Endeavour)段的17个热液黑烟囱体样品对其中的硫同位素进行分析测定,讨论了因代沃段热液活动区内黑烟囱体成矿的物质来源、将硫同位素数据与已发表的热液流体及硫化物数据耦合,并结合前人的成果得到如下认识:(1)因代沃段硫化物的硫同位素组成与其他无沉积物覆盖的洋脊硫化物硫同位素组成相似,然而其相比于南胡安.德富卡洋脊(South Juan de Fuca Ridge,SJFR)硫化物亏损重同位素;(2)结合前人研究成果,如果SJFR硫化物的硫全部来自基底玄武岩的淋洗与海水中的硫酸盐,那么因代沃段硫化物的硫可能有1%～3%来自沉积物的贡献,故提出因代沃段成矿系统中的硫来源主要来自基底玄武岩,同时伴随有少量海水硫酸盐来源及沉积物来源的硫加入;(3)将硫同位素数据与已发表的热液流体及硫化物数据进行耦合发现热液流体中的沉积物信号与硫化物中的硫可能来自不同的源,并提出沉积物端元可能位于下渗区。     

基于多目标决策模型的如东近岸浅滩适宜围填规模研究

适宜的围填海规模能够最大限度的协调岸滩围填和海洋资源环境保护的关系。以江苏辐射沙脊海域如东近岸浅滩围填海为例,运用多目标决策理论与方法,综合考虑围填海对动力泥沙环境、海洋生态环境、资源综合开发和社会经济影响,建立围填海适宜规模评价指标体系,构建适宜围填规模评价决策模型。并对该岸段不同的围填规模方案进行计算,据此推荐围堤前沿线位于+5 m的围填海方案是该岸段的适宜围填规模。对围填海适宜规模的研究手段和方法进行了探索和尝试。提出的研究方法及推荐的如东岸段近岸浅滩适宜围填规模可为江苏滩涂资源的开发提供参考。     

The life cycle of crevasse splays as a key mechanism in the aggradation of alluvial ridges and river avulsion

Accommodation space in the unconfined distal part of low‐gradient fluvial fans facilitates abundant floodplain deposition. Here, the development of crevasse splays plays a key role in the aggradation of alluvial ridges and subsequent river avulsion. This study presents an analysis of different stages in the evolution of crevasse splays based on observations made in the modern‐day Río Colorado dryland fluvial fan fringing the endorheic Altiplano Basin in Bolivia. A generic life cycle is proposed in which crevasse‐splay channels adjust towards a graded equilibrium profile with their lower‐lying distal termini acting as a local base level. Initial development is dominantly controlled by the outflow of floodwater, promoting erosion near the crevasse apex and deposition towards the splay fringes. When proximal incision advances to below the maximum level of floodplain inundation, return flow occurs during the waning stage of flooding. This floodwater reflux leads to a temporary repositioning of the local base level to the deeper trunk‐channel thalweg at the apex of the crevasse‐splay channels. The resultant decrease in the floodplainward gradient of these channels ultimately leads to backfilling and abandonment of the crevasse splay, leaving a subtle local elevation of the floodplain. Consecutive splays form an alluvial ridge through lateral amalgamation and subsequent vertical stacking, which is mirrored by the aggradation of their parent channel floor. As this alluvial ridge becomes increasingly perched above the surrounding floodplain, splay equilibration may cause incision of the levee crevasse down to or below its trunk channel thalweg, leading to an avulsion. The mechanisms proposed in this study are relevant to fluvial settings promoting progradational avulsions. The relatively rapid accumulation rate and high preservation potential of crevasse splays in this setting makes them an important constituent of the resultant fluvial stratigraphy, amongst which are hydrocarbon‐bearing successions. Copyright © 2018 John Wiley & Sons, Ltd.     

Sediment characteristics and internal architecture of offshore sand ridges on a tideless continental shelf (western Mediterranean)

An integrated approach combining swath bathymetry, an extensive dataset of vibrocores and high-resolution seismic reflection data was used to assess the origin and evolution of offshore sand ridges on a tideless continental shelf (Gulf of Valencia, western Mediterranean). The sand ridges are located in the mid-outer shelf at 55–85 m water depth, obliquely oriented to the shoreline. They are 1.5 to 7 m high, with a wavelength between 600 and 1,100 m and a mean height-to-wavelength ratio of 0.004. The sand ridges are composed of well-sorted medium sand and are partially covered by a mud layer, evidencing a moribund stage. They overlie an erosion surface that locally crops out at the seafloor and is interpreted as the Holocene wave-ravinement surface. In the sediment cores, this surface corresponds to an erosional lag composed of coarse sand and gravel with pebbles. Small topographic irregularities on this surface are interpreted as shoreline-associated features that may act as the precursor for ridge development. Their preservation within the sand ridges could be related to the hardness of these features. Internally, the sand ridges display high-angle dipping reflections, indicating ridge migration towards the southeast in the direction of the present-day sediment transport direction. The presence of interbedded mud layers, associated with these reflections, indicates intermittent episodes of mud deposition when active. The internal architecture of some small ridges also provides new insights into their transition from an active to moribund state, as evidenced by a change in the geometry of the internal units from progradational to aggradational, finally being overlain by onlapping finer deposits over the flanks and in the troughs. The Gulf of Valencia sand ridge field constitutes a valuable potential sand resource of 22 million m³ of well-sorted medium and coarse sand with limited mud content, which must be preserved as a strategic sand reservoir. © 2020 John Wiley & Sons, Ltd.     

超慢速扩张洋中脊岩浆形成和迁移汇聚动力学研究

超慢速扩张洋中脊具有不同于其他扩张速率洋中脊的特征,表现为剧烈变化的洋壳厚度和典型的非岩浆段。本文对前人研究的洋中脊岩浆形成关键因素和迁移聚集模式进行综合分析,结合实际地球物理和地球化学的观测数据,探讨了超慢速扩张洋中脊岩浆从地幔源区形成、迁移汇聚、形成洋壳的整个地质过程,进一步指出了影响洋壳结构的关键控制因素。研究结果表明,超慢速扩张洋中脊沿轴洋壳厚度的变化受岩浆补给量和迁移汇聚的共同制约。其中,岩浆补给量受控于洋中脊的地幔潜热、地幔成分和扩张速率的变化;岩浆迁移和汇聚过程则与超慢速扩张洋中脊密集的分段特征和阻渗层的空间结构密切相关。     

The vertical structure of tidal currents

Abstract

The accuracy to which the vertical structure of tidal currents can be predicted is examined. Theoretical models for current structure are developed employing (a) a constant eddy viscosity E = ε and (b) an eddy viscosity varying linearly with height above the sea bed z; E(z)=βz. By requiring these models to satisfy the commonly accepted quadratic friction law, the condition ε>½k is deduced where k is the bed friction coefficient, W a representative velocity and D the depth.

The sense of rotation of a current ellipse is shown to be related to the configuration of co-tidal charts. The vertical structure of the current ellipse is illustrated from the theoretical models and the sensitivity of this structure is examined for the following variables: (a) eddy viscosity ε or βz, (b) the bed friction parameter kW, (c) rotation of the prescribed pressure gradients and (d) tidal period. While reasonable agreement between observed and calculated current profiles may often be reported, precise agreement is shown to depend upon accurate specification of both eddy viscosity and the bed stress condition.     

2005年6月东亚夏季风活动异常及其影响机制初步分析

应用欧洲中心（ECMWF）N日08时客观分析资料、中国测站降水资料、OLR资料和NCEP2再分析资料以及国家气象中心提供的1976～2006年的逐日西太平洋副热带高压脊线位置，利用合成分析、小波分析和带通滤波等方法，初步分析了2005年东亚夏季风的活动特征和影响机制。结果发现2005年6月东亚夏季风活动出现明显异常，其中31～32候季风前沿异常停留在南海-菲律宾一带以及华南西部，33～35候季风前沿停滞在华南地区，较常年明显偏南，造成了我国华南洪涝；36候季风前沿跳至黄淮地区，导致长江空梅、黄淮地区多雨。进一步研究发现西太平洋副热带高压和中高纬槽脊活动异常及热带和中高纬度低频振荡是导致2005年6月东亚夏季风异常的主要原因。     

智利三联点南部含洋脊海洋板块俯冲过程的数值模拟

"三联点"是全球板块运动系统的重要组成部分.扩张的智利洋脊向南美板块俯冲形成了智利三联点,并造成了智利三联点以南数百千米范围内剧烈的地形变化.智利三联点区域的初始板块俯冲角度、洋脊扩张速率等因素的差异对南美板块岩石层热结构及地形起伏造成了显著影响.本文采用有限差分方法,构建了智利三联点区域洋脊俯冲的二维数值模型,模拟洋...     

Analysis of simrad EM12 multibeam bathymetry and acoustic backscatter data for seafloor mapping,exemplified at the Mid-Atlantic Ridge at 45° N

The EM12 multibeam echosounder can record acoustic backscatter information as well as high resolution bathymetry. The dataset presented, from the axis of the Mid-Atlantic Ridge at 45° N, was the first EM12 survey of a mid-ocean ridge. This paper presents methods for utilising the backscatter information. Data processing enables the production of a mosaic of acoustic backscatter, and visualisation techniques are investigated to provide initial qualitative views of the combined backscatter and bathymetry datasets. The co-registration of the backscatter and bathymetry data enables quantitative analysis of their relationships. Various sites of different geological type have been selected and their angular acoustic backscattering relationships estimated, including the effect on backscatter of incidence angle, its regional variability with bottom type and the influence of bottom slope. Incidence angles and bottom type are shown to affect backscatter to a similar degree, while slopes appear to contribute little. The geometry of hull-mounted systems, such as the EM12, is significantly different from that of conventional sidescan sonars, such as GLORIA, and the backscatter images from the two types differ in various respects. Because of the wide variations in incidence angle that are common with hull-mounted systems, and the importance of incidence angle in determining backscatter strength, it is vital to consider the effect of incidence angle during interpretation.