Variations in the distribution of magma in the lower crust and at the Moho beneath the East Pacific Rise at 9°-10°N

Measurements of the seafloor deformation under ocean waves (compliance) reveal an asymmetric lower crustal partial melt zone (shear velocity less than 1.8 km/s) beneath the East Pacific Rise axis between 9° and 10°N. At 9°48′N, the zone is less than 8 km wide and is centered beneath the rise axis. The zone shifts west of the rise axis as the rise approaches the westward-stepping 9°N overlapping spreading center discontinuity and is anomalously wide at the northern tip of the discontinuity. The ratio of the compliance determined shear velocity to the compressional velocities (estimated by seismic tomography) suggests that the melt is well-connected in high-aspect ratio cracks rather than in isolated sills. The shear and compressional velocities indicate less than 18% melt in the lower crust on average. The compliance measurements also reveal a separate lower crustal partial melt zone 10 km east of the rise axis at 9°48′N and isolated melt bodies near the Moho beneath four of the 39 measurement sites (three on-axis and one off-axis). The offset of the central melt zone from the rise axis correlates strongly with the offset of the overlying axial melt lens and the inferred center of mantle melting, but its shape appears to be controlled by crustal processes.     

Water-weakened lower crust and its role in the concentrated deformation in the Japanese Islands

The nature and origin of the concentrated deformation zone along the Japan Sea coast (NKTZ: Niigata-Kobe tectonic zone) was investigated by carefully analyzing the GPS data and qualitatively modeling the lower crust in NKTZ. It was concluded that this deformation zone is not a plate boundary between the Amurian plate (AMU) and the North America plate but is rather an internal deformation zone near the eastern margin of AMU. The data previously obtained on the conductivity anomalies in the lower crust and the ³He/⁴He ratios suggest that the concentrated deformation in NKTZ results from the lower crust in NKTZ being weakened by a high water content. The high water content is thought to result from the dehydration of subducting slabs. NKTZ has a higher water content in the lower crust than other regions do because there is no Philippine Sea plate (PHS) seismic slab beneath NKTZ. In other regions, it is estimated that the mantle wedge above the seismic Philippine Sea slab prevents the water dehydrated from the slab from rising to the lower crust, and that the lithosphere within PHS itself prevents the water dehydrated from the Pacific plate from rising up through it.     

Insights into river bank erosion processes derived from analysis of negative erosion‐pin recordings: observations from three recent UK studies

Recent studies of river bank erosion in three catchments in the UK have been characterized by the persistent occurrence of negative erosion‐pin results. The cause of these negative recordings is considered with reference to field data from the Afon Trannon, Nant Tanllwyth and River Arrow, and to a laboratory study of freeze–thaw and desiccation processes. It seems that there is potential for, and in some cases evidence of, a number of different circumstances that generate negative results, but none of these alone is sufficient to explain all incidents. Factors considered include: deposition of sediment during high flows; soil fall from the upper parts of the bank on to lower erosion pins; loosening of the soil surface and expansion/contraction of the soil mass with fluctuations in temperature and moisture content; movement of the erosion‐pin within the bank and human interference. Each has its own implications for the use of erosion pins. Further issues arise when including negative data in subsequent data analysis, and it is demonstrated that attempts to correlate erosion rates with hydro‐meteorological data in order to ascertain causes of erosion will be influenced by the way in which negative data are handled. It is thus suggested that any study of river bank erosion using erosion pins should state whether or not negative data were obtained, and if so, how they were included in data analysis. Failure to include this information could lead to comparison of mean erosion rates that reflect bank processes very differently. The studies presented here offer a clear example of the value of ‘anomalous’ field data: results which do not appear to fit expected patterns can reveal as much about the processes in operation as those that do. Copyright © 2002 John Wiley & Sons, Ltd.     

Towards an integrated environmental assessment for wetland and catchment management

This paper develops a decision support system for evaluation of wetland ecosystem management strategy and examines its, so far partial, application in a case study of an important complex coastal wetland known as the Norfolk and Suffolk Broads, in the east of England, UK. Most managed ecosystems are complex and often poorly understood hierarchically organized systems. Capturing the range of relevant impacts on natural and human systems under different management options will be a formidable challenge. Biodiversity has a hierarchical structure which ranges from the ecosystem and landscape level, through the community level and down to the population and genetic level. There is a need to develop methodologies for the practicable detection of ecosystem change, as well as the evaluation of different ecological functions. What is also required is a set of indicators (environmental, social and economic) which facilitate the detection of change in ecosystems suffering stress and shock and highlight possible drivers of the change process. A hierarchical classification of ecological indicators of sustainability would need to take into account existing interactions between different organization levels, from species to ecosystems. Effects of environmental stress are expressed in different ways at different levels of biological organization and effects at one level can be expected to impact other levels, often in unpredictable ways. The management strategy, evaluation methodologies and indicators adopted should also assess on sustainability grounds whether any given management option is supporting, or reducing, the diversity of functions which are providing stakeholders with the welfare benefits they require.     

The hydrogeochemistry of the Kärkevagge Valley, Lapland, Sweden

The Kärkejokk (jokk = Lappish for brook) is rich in sulfate and calcium, both elements having been considered enigmatic. To resolve these problems we collected waters at 13 sites during 27 June to 1 September 1996. Nine sites were in the Kärkevagge, and the others in the drainage towards lake Torne Träsk. Rain waters were collected the same period. Conductivity, pH, and temperature were measured in the field, whereas salt load and the elements Na, K, Ca, Mg, S, Si, Fe, Al, Mn, Zn, Sr, and Ba were determined in the laboratory.
Mixing models based on rain water and leaching products of the major bedrocks do not explain observed element patterns except in the lower parts of the jokk. However, oxidation of pyrite has formed acid, sulfate–rich solutions that released Ca and Mg from limestones, and Fe, Mn, Al, and Si, from black shales (Malmsten 1998; Malmsten et al. 2000). Conservative mixing models, using rain water, leached bedrock and pyrite, match the jokk waters quite well, and sulfur isotope data corroborate these findings. The nearby Låktajokk, and Vassijokk also contain much S.
Where these waters debouch they may deposit Si, Al, and Ca, but only little S on various rocks. Total rock analyses, thermodynamic and X–ray data suggest that gypsum, barite, or alunite are not formed in major quantities.
These models show that the hydrogeochemistry of the Kärkejokk may be less enigmatic than often assumed.     

咸淡水过渡带化学过程的试验研究

通过不同比例的咸淡水混合作用及水岩作用的室内模拟实验,对咸淡水过渡带的水文地球化学作用进行了研究。在咸淡水混合作用的过程中,海水与淡水的混合是以机械混合为基础的复杂的化学过程,混合液的总碱度和pH值均显著上升,而电导率明显下降,方解石和石膏的饱和指数均明显增大,而Pco2降低。在水岩作用的过程中,混合液的pH值、总碱度和电导率均显著上升,石膏的饱和指数由～1．06～-0．71升高至-0．86～-0．50,石膏发生溶解;方解石的饱和指数由0．69～1．07降至0.00-0．10,方解石发生沉淀．最后接近平衡状态。     

全球地表热流的产生与分布

全球地表热流是反映地球内部热与动力学过程的一种主要能流.本文在三维球坐标框架下，就几个不同的粘度模型分别研究地幔内部密度异常(基于全球地震层析结果)以及板块运动激发的地幔流动的热效应及其对于观测地表热流产生和分布特征的贡献.由于地幔动力系统具有较高的Pe数，可以期望由板块运动激发的地幔流动将强烈地扰动地幔内部初始传导状态下的温度场以及地表热的热流分布.结果表明，与地幔内部密度异常产生的热效应相比，运动的板块及其激发的地幔流动在全球地表观测热流的产生和分布特征上起着更为重要的作用.观测到的大洋中脊处的高热流在很大程度上可以归因于板块激发的地幔流动的热效应.计算的平均温度剖面较好地揭示了岩石圈和D″层的温度特征，即温度随深度的剧烈变化，这与我们目前通过其他手段对岩石圈和D″层的温度结构了解是一致的.一个下地幔粘度比上地幔高出30倍的粘度结构(文中使用的粘度模型2)较之其余模型的拟合程度似乎更好.     

Capabilities and limitations of detailed hillslope hydrological modelling

Hillslope hydrological modelling is considered to be of great importance for the understanding and quantification of hydrological processes in hilly or mountainous landscapes. In recent years a few comprehensive hydrological models have been developed at the hillslope scale which have resulted in an advanced representation of hillslope hydrological processes (including their interactions), and in some operational applications, such as in runoff and erosion studies at the field scale or lateral flow simulation in environmental and geotechnical engineering. An overview of the objectives of hillslope hydrological modelling is given, followed by a brief introduction of an exemplary comprehensive hillslope model, which stimulates a series of hydrological processes such as interception, evapotranspiration, infiltration into the soil matrix and into macropores, lateral and vertical subsurface soil water flow both in the matrix and preferential flow paths, surface runoff and channel discharge. Several examples of this model are presented and discussed in order to determine the model's capabilities and limitations. Finally, conclusions about the limitations of detailed hillslope modelling are drawn and an outlook on the future prospects of hydrological models on the hillslope scale is given.The model presented performed reasonable calculations of Hortonian surface runoff and subsequent erosion processes, given detailed information of initial soil water content and soil hydraulic conditions. The vertical and lateral soil moisture dynamics were also represented quite well. However, the given examples of model applications show that quite detailed climatic and soil data are required to obtain satisfactory results. The limitations of detailed hillslope hydrological modelling arise from different points: difficulties in the representations of certain processes (e.g. surface crusting, unsaturated–saturated soil moisture flow, macropore flow), problems of small‐scale variability, a general scarcity of detailed soil data, incomplete process parametrization and problems with the interdependent linkage of several hillslopes and channel–hillslope interactions. Copyright © 1999 John Wiley & Sons, Ltd.