Endogenic heat from Enceladus' south polar fractures: New observations, and models of conductive surface heating

Linear features dubbed “tiger stripes” in the south polar region of Enceladus have anomalously high heat fluxes and are the apparent source of the observed plume. Several explanations for the observed activity have been proposed, including venting from a subsurface reservoir of liquid water, sublimation of surface ice, dissociation of clathrates, and shear heating. Thermal modeling presented in this work, coupled with observations from the Cassini Composite Infrared Spectrometer (CIRS) instrument, seeks to elucidate the underlying physical mechanism by constraining vent temperatures and thermal emission sources, using a model in which the observed thermal signature results primarily from conductive heating of the surface by warm subsurface fractures. The fractures feed surface vents, which may themselves contribute to the observed thermal emission. Model variables include vent temperature, presence of a surface insulating layer, vent width, time-variable heat input, and heat sources other than the central vent. Results indicate that CIRS spectra are best fitted with a model in which the surface is heated by narrow vents at temperatures as high as 223 K. Although equally good fits can be obtained for vent temperatures in the range of 130 to 155 K if the vents are wider (180 m and 22 m respectively) and dominate the emission spectrum, these models are probably less realistic because vents with these temperatures and widths cannot supply the observed H₂O vapor flux. The lack of emission angle dependence of the thermal emission when July 2005 and November 2006 CIRS observations are compared also argues against thermal emission being dominated by the vents themselves. Thus, results favor high-temperature models, possibly venting from a subsurface liquid water reservoir. However, a fracture filled with liquid water near the surface would produce significantly higher radiances than were detected unless masked by a thermally insulating surface layer. Models that best match the CIRS data are characterized by small fractions of the surface at high temperatures, which strengthens the case for the vents and/or their conductively-heated margins being the primary heat source. Models where the thermal emission is dominated by conductive heating of the surface from below by a laterally-extensive buried heat source cannot reproduce the observed spectrum. Models with a 10 cm thick upper insulating layer produce a poor match to the CIRS spectra, suggesting high thermal inertias near the tiger stripes. Finally, tiger stripe thermal emission measured by CIRS varied by less than 15% over the 16 month period from July 2005 to November 2006.     

Compaction and fragmentation of porous gypsum targets from low-velocity impacts

We performed low-velocity impact experiments of gypsum spheres with porosity ranging from 0 to 61% and diameter ranging from 25 to 83 mm. The impact velocity was from 0.2 to 22 m/s. The target was an iron plate. The outcome of gypsum spheres with porosity 31-61% was different from those of non-porous ice [Higa M., Arakawa, M., Maeno, N., 1996. Planet. Space Sci. 44, 917-925; Higa M., Arakawa, M., Maeno, N., 1998. Icarus 133, 310-320] and non-porous gypsum. In between the intact and fragmentation modes, the outcome of the non-porous ice and gypsum was crack growth at the impact point. However, the outcome of the porous gypsum was compaction. We found that the restitution coefficients of the porous gypsum spheres were all in a similar range, in spite of the difference of the porosity and size at impact velocities up to about 10 m/s where they begin to be fragmented in pieces. Moreover, there is not a large difference between the restitution coefficient of porous and non-porous gypsum. These results collectively indicate that restitution coefficient of gypsum spheres of cm-size is not strongly dependent upon the porosity and compaction process.     

Spatial distribution of putative water related features in Southern Acidalia/Cydonia Mensae, Mars

Many putative water-related features exist in the northern lowlands of Mars. These features may provide clues to the abundance and timing of water or ice that existed there in the past. The Cydonia Mensae and Southern Acidalia area was chosen as the study area owing to the abundance of two of these features: giant polygons and pitted cones. In addition a section of the Deuteronilus shoreline is located there. The abundance and close proximity of the features makes this area an excellent place to study the spatial relationships between these landforms, as well as the morphological characteristics of pitted cones. The features were mapped into a GIS for spatial analyses. The highest densities of pitted cones and giant polygons are adjacent but distinctly separated by a knobby ridge that is surrounded by the Deuteronilus putative shoreline. Pitted cones were measured and examined to determine if a classification by morphology is possible, but the results were inconclusive. Statistical tests on pit-to-cone diameter ratios and tests of surface temperatures of cone material suggest, but do not verify, a single cone origin. The various shapes, sizes, and putative ages of pitted cones may be attributed to temporal variation in emplacement and spatial variation in material properties. Among the possible scenarios put forth for pitted cone genesis on Mars two are likely candidates in Cydonia Mensae: (1) the sublimation of a cold-based glacier, and (2) a buried lens of methane and/or CO₂ clathrates.     

Evaluation of carbonate abundance in putative martian paleolake basins

Carbonate deposits have not been found so far on Mars, although there appears to have been sufficient water to have supported their formation. Many hypotheses have been proposed in order to explain this. In the present work we explore the possibility that the missed detection of carbonate deposits on the martian surface could be simply due to the fact that the concentration of carbonates, when mixed with other materials present in the sedimentary deposits, may be below the detection limit of the various instruments used so far in this search. In the present study we consider 21 putative paleolacustrine basins and use a sediment transport model to estimate the abundance of carbonates which could be present in the sediments deposited on the basin floor. In this way we find that for all the selected basins the estimated carbonate abundances are in general less than a few percent, and such values are below (or at best comparable to) the detection limits of the spectrometers flown around Mars during the recent space missions. Furthermore, applying the sediment transport model to the well studied Eberswalde crater, we conclude that the fluvio-lacustrine activity in this basin should have lasted for a period on the order of 10³–10⁴ years, in good agreement with previous work. Our results suggest that a hydrological cycle, able to move large volumes of water and to create relatively stable lakes, could have been active intermittently on Mars in the past, producing carbonate deposits that could escape detection by the instruments that have flown to date.     

Geologic context of in situ rocky exposures in Mare Serpentis, Mars: Implications for crust and regolith evolution in the cratered highlands

Global acquisition of infrared spectra and high-resolution visible and infrared imagery has enabled the placement of compositional information within stratigraphic and geologic context. Mare Serpentis, a low albedo region located northwest of Hellas Basin, is rich in spectral and thermophysical diversity and host to numerous isolated exposures of in situ rocky material. Most martian surfaces are dominated by fine-grained particulate materials that bear an uncertain compositional and spatial relationship to their source. Thus location and characterization of in situ rock exposures is important for understanding the origin of highland materials and the processes which have modified those materials. Using spectral, thermophysical and morphologic information, we assess the local and regional stratigraphy of the Mare Serpentis surface in an effort to reconstruct the geologic history of the region. The martian highlands in Mare Serpentis are dominated by two interspersed surface units, which have distinct compositional and thermophysical properties: (1) rock-dominated surfaces relatively enriched in olivine and pyroxene, and depleted in high-silica phases, and (2) sediment or indurated material depleted in olivine and pyroxene, with relatively higher abundance of high-silica phases. This is a major, previously unrecognized trend which appears to be pervasive in the Mare Serpentis region and possibly in other highland areas. The detailed observations have led us to form two hypotheses for the relationship between these two units: either (1) they are related through a widespread mechanical and/or chemical alteration process, where less-mafic plains materials are derived from the mafic bedrock, but have been compositionally altered in the process of regolith formation, or (2) they are stratigraphically distinct units representing separate episodes of upper crust formation. Existing observations suggest that the second scenario is more likely. In this scenario, plains materials represent older, degraded, and possibly altered, “basement” rock, whereas the rocky exposures represent later additions to the crust and are probably volcanic in origin. These hypotheses should be further testable with decimeter-resolution imagery and meter-resolution short wavelength infrared spectra.     

The geology of Hotei Regio, Titan: Correlation of Cassini VIMS and RADAR

Joint Cassini VIMS and RADAR SAR data of ∼700-km-wide Hotei Regio reveal a rich collection of geological features that correlate between the two sets of images. The degree of correlation is greater than anywhere else seen on Titan. Central to Hotei Regio is a basin filled with cryovolcanic flows that are anomalously bright in VIMS data (in particular at 5 μm) and quite variable in roughness in SAR. The edges of the flows are dark in SAR data and appear to overrun a VIMS-bright substrate. SAR-stereo topography shows the flows to be viscous, 100-200 m thick. On its southern edge the basin is ringed by higher (∼1 km) mountainous terrain. The mountains show mixed texture in SAR data: some regions are extremely rough, exhibit low and spectrally neutral albedo in VIMS data and may be partly coated with darker hydrocarbons. Around the southern margin of Hotei Regio, the SAR image shows several large, dendritic, radar-bright channels that flow down from the mountainous terrain and terminate in dark blue patches, seen in VIMS images, whose infrared color is consistent with enrichment in water ice. The patches are in depressions that we interpret to be filled with fluvial deposits eroded and transported by liquid methane in the channels. In the VIMS images the dark blue patches are encased in a latticework of lighter bands that we suggest to demark a set of circumferential and radial fault systems bounding structural depressions. Conceivably the circular features are tectonic structures that are remnant from an ancient impact structure. We suggest that impact-generated structures may have simply served as zones of weakness; no direct causal connection, such as impact-induced volcanism, is implied. We also speculate that two large dark features lying on the northern margin of Hotei Regio could be calderas. In summary the preservation of such a broad suite of VIMS infrared color variations and the detailed correlation with features in the SAR image and SAR topography evidence a complex set of geological processes (pluvial, fluvial, tectonic, cryovolcanic, impact) that have likely remained active up to very recent geological time (<10⁴ year). That the cryovolcanic flows are excessively bright in the infrared, particularly at 5 μm, might signal ongoing geological activity. One study [Nelson, R.M., and 28 colleagues, 2009. Icarus 199, 429-441] reported significant 2-μm albedo changes in VIMS data for Hotei Arcus acquired between 2004 and 2006, that were interpreted as evidence for such activity. However in our review of that work, we do not agree that such evidence has yet been found.     

Formation of H2 on an olivine surface: a computational study

The formation of H₂ on a pristine olivine surface [forsterite (010)] is investigated computationally. Calculations show that the forsterite surface catalyzes H₂ formation by providing chemisorption sites for H atoms. The chemisorption route allows for stepwise release of the reaction exothermicity and stronger coupling to the surface, which increases the efficiency of energy dissipation. This suggests that H₂ formed on a pristine olivine surface should be much less rovibrationally excited than H₂ formed on a graphite surface. Gas-phase H atoms impinging on the surface will first physisorb relatively strongly  ( E _phys= 1240 K)  . The H atom can then migrate via desorption and re-adsorption, with a barrier equal to the adsorption energy. The barrier for a physisorbed H atom to become chemisorbed is equal to the physisorption energy, therefore there is almost no gas-phase barrier to chemisorption. An impinging gas-phase H atom can easily chemisorb  ( E _chem= 12 200 K)  , creating a defect where a silicate O atom is protonated and a single electron resides on the surface above the adjacent magnesium ion. This defect directs any subsequent impinging H atoms to chemisorb strongly (39 800 K) on the surface electron site. The two adjacent chemisorbed atoms can subsequently recombine to form H₂ via a barrier (5610 K) that is lower than the chemisorption energy of the second H atom. Alternatively, the adsorbed surface species can react with another incoming H atom to yield H₂ and regenerate the surface electron site. This double chemisorption 'relay mechanism' catalyzes H₂ formation on the olivine surface and is expected to attenuate the rovibrational excitation of H₂ thus formed.