Fractional crystallization models and B–Be–Li systematics at Mt Somma-Vesuvius volcano (Southern Italy)

A compilation of B–Be–Li data on rocks that cover the entire eruptive history of Somma-Vesuvius is presented and interpreted in the light of evolution models for the Somma-Vesuvius rocks. Using major and trace element data, fractional crystalllization models are presented for different geochemical units. These data were used to constrain the source mineralogy of the Somma-Vesuvius rocks (ol-opx-cpx-gar-amp of 0.4-0.3-0.1-0.1-0.1), the amount of sediment added (5–10%) and the melt fraction from batch partial melting computations (0.05–0.1). From the B–Li data it is inferred that the main process responsible for the B isotopic signature is sediment recycling. However, the B–Li data show a major variation in Li abundances respect to B which is explained with Li dehydration before the fluid enriched the mantle wedge that produced the arc magmas. The Somma-Vesuvius B isotope composition is intermediate between that of the Campi Flegrei and the broad field of the Eolian Island arc. A low Be isotopes in the recent volcanic rocks can be explained as: (a) the top 1–22 m of the incoming sediment is accreted, (b) large amounts of sediment erosion, (c) a slow rate of subduction which have provoked a long magmatic history for the Vesuvius magma, (d) the sediment component takes several Myr longer than the subducting plate to reach the magma source region beneath Italy.     

Fe-Cu-Zn-Mo同位素示踪氧化还原过程

非传统稳定同位素（Fe-Cu-Zn-Mo）理论与数据相结合提高了科研工作者对地质体系氧化还原过程的理解。本文对这一相对较新的领域进行了综述,包括与氧化还原过程相关的同位素分馏理论和实验约束、时空尺度下的氧逸度以及同位素示踪氧化还原过程。稳定同位素理论预测,Fe-Cu-Zn-Mo同位素应该对氧化还原状态的变化能够做出响应。结果表明,Fe同位素作为岩浆过程、表生过程、俯冲带流体性质"氧逸度计"应用前景广阔;Cu同位素在岩浆、热液、陆地系统可以很好地示踪氧化还原过程;Zn同位素由于络合过程分馏已经被用在许多不同环境中作为含硫/碳流体迁移的敏感示踪剂;Mo同位素作为古氧逸度计可有效重建古海洋-大气氧化还原状态。     

Aragonite cycles: diagenesis caught in the act

Organic biomarker and nannofossil assemblages are used in combination with sedimentary petrology to identify the role of diagenesis for the formation of a rhythmic calcareous succession. A record from the Early Pliocene of the Maldives (Ocean Drilling Program, ODP Leg 115) is presented containing precession and eccentricity cycles expressed as variable aragonite content. Additional sub‐Milankovitch cycles are caused by rhythmic precipitation of calcite cement in the lower part of the interval. Comparison with palaeo‐productivity indicators (nannofossils, chlorin, total organic carbon) suggests that cementation occurs preferentially in intervals characterized by increasing or decreasing productivity. The coupled variability in productivity and carbonate diagenesis is attributed to the effect of organic matter degradation in the sediment. The observed combination of primary and diagenetic factors hampers the interpretation of the cyclicity on Milankovitch and sub‐Milankovitch scales. Diagenetically stable proxies for palaeo‐productivity, such as nannofossil assemblage data, were used to distinguish between palaeoclimate and diagenetic influences.     

青藏高原土壤水热分布特征及冻融过程在季节转换中的作用

利用GAME-Tibet期间所取得的高分辩率土壤温度和含水量资料，对青藏高原（主要是藏北高原）土壤水热分布特征及冻融过程在季节转换中的作用进行了分析。指出藏北高原4cm学深处土壤在10月份开始冻结，次年4-5月份开始消融，冻结持续时间长达5-7个月。冻结过程有利于土壤维持其水分，因此，在刚刚开始消融时土壤含水量仍然很高。从而为夏季风爆发前土壤通过蒸发向大气提供水分打下了基础。指出土壤冻融过程可能在高原季节转换中起着重要作用。     

Identification of geomorphic process units in Kärkevagge, northern Sweden, by remote sensing and digital terrain analysis

Sediment transport processes in the Kärkevagge are investigated concerning their spatial and temporal characteristics due to long–term monitoring. Within this study remote sensing techniques and GIS modelling in connection with geomorphic mapping are applied for identification and characterization of geomorphic process units. Relationships between geomorphometric parameters and slope processes like solifluction, talus creep and rockfall have been analysed. Multitemporal Landsat–TM5 scenes are used as source for landcover characteristics (Normalized Difference Vegetation Index) after preprocessing involving orthorectification and topographic normalization in order to remove possible terrain–induced effects. Additionally, a digital elevation model with a resolution of 20 m for the Kärkevagge catchment is developed and parameters like slope gradient, slope aspect and profile curvature are extracted as input for the analysis of the sediment transport system. The combination of landcover information, geomorphometrical and topological features allows the definition of areas for single process activities. They show specific sediment displacement characteristics depending on material conditions, topological and geometrical features. Geomorphic process units, which show a homogenous composition, are extracted from these available layers.     

The rate of grain release by pore-ice sublimation in cold-aeolian environments

Pore‐ice sublimation is a prerequisite for aeolian activity in cold environments where surface sediments hold significant amounts of frozen water. Few quantitative studies have defined the rate of grain release from cemented surfaces by pore‐ice sublimation. In 1996–1997, controlled field experiments at Presqu'ile Beach, Ontario, were implemented to measure sediment release from frozen surfaces. The release rates were compared to the local wind regime, ambient temperature and humidity. In additional field experiments, the effect of sediment water content on grain release by sublimation was examined. From the experimental results, an equation which predicts grain release based on local wind speed, ground temperature, humidity, and surface water content is proposed. Predicted release rates show reasonable agreement with natural deflation measured on the beach at Presqu'ile Provincial Park.     

Dynamic processes of a simple linear dune—a study in the Taklimakan Sand Sea, China

Samples of dune sands, surveys of the morphology and field measurements of wind velocity and direction of a simple linear dune in Taklimakan Sand Sea show that the airflow and sand flux vary with the change of wind direction on the dune surface. Decrease of the airflow stress on the lee flank does not result in much decrease of the sand flux because of the low threshold shear velocities and the airflow conditions. There are no significant relations between the sand flux on the lee flank and the angle of incidence of the airflow. The low threshold shear velocities and the maintenance of the sand flux at the lee flank are the main mechanisms keeping the linear shape of the dunes. Measurements of the sand flux shows that it reaches a maximum on the crest of the dune. The grain size of the transported sands has some differences compared to that of the dune surface. The sands transported are finer than that on the dune surface, but better sorted under the influence of the medium to low wind activity. The field experiment results exhibit that it is possible for the dunes to be shaped as linear dunes during the processes of accumulation and elongation.     

Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Old inherited origin for the present near-bimodal topography of Africa

Africa’s landscape is dominated by a manifold of second-order epeirogenic structures superimposed on a first-order bimodal topography. Bivariate regression analysis of Africa’s surface topography shows that this is a complexly folded surface with regionally elevated areas in southern and eastern Africa, and a topographically low northern and western Africa. The apparent spatial relationships between these features are analysed using anomaly correlation between surface topography and free-air gravity anomalies. Occurrences of positively correlated features between gravity and topography in Africa are found to be limited to second-order epeirogenic features. Geophysical modelling and geologic evidence indicate that Africa’s bimodal topography is genetically distinct from these second-order features, and linked to sources as deep as the sublithospheric mantle. The age, measured and modelled elevation of the bimodal topography require that topographic uplift of south-central Africa be episodic. We infer from our findings together with relative sea-level changes, that the near-bimodality of Africa’s topography is an ancient feature inherited at least from upper Paleozoic times. Our reconstructed paleotopography suggests that Africa was largely a low-lying continent dominated by its cratons, and that basement distribution disregards the present-day uplift patterns of Africa.