The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

Calibration of an oscillating nozzle‐type rainfall simulator

Nozzle‐type rainfall simulators are commonly used in hydrologic and soil erosion research. Simulated rainfall intensity, originating from the nozzle, increases as the distance between the point of measurement and the source is decreased. Hence, rainfall measured using rain gauges would systematically overestimate the rainfall received at the ground level. A simple model was developed to adjust rainfall measured anywhere under the simulator to plot‐wide average rainfall at the ground level. Nozzle height, plot width, gauge diameter and height, and gauge location are required to compute this adjustment factor. Results from 15 runs at different rain intensities and durations, and with different rain gauge layouts, showed that a simple average of measured rain would overestimate the plot‐wide rain by about 20 per cent. Using the adjustment factor to convert measured rainfall for individual gauges before averaging improved the estimate of plot‐wide rainfall considerably. For the 15 runs considered, overall discrepancy between actual and measured rain is reduced to less than 1 per cent with a standard error of 0·97 mm. This model can be easily tested in the ?eld by comparing rainfall depths of different sized gauges. With the adjustment factor they should all give very similar values. Copyright © 2003 John Wiley & Sons, Ltd.     

关联度分析法在确定土地定级因素权重中的应用

从关联度分析法的基本原理入手，介绍了应用关联度分析法确定土地定级因素权重的具体方法，探讨了关联度分析法运用于土地定级因素权重确定的可行性。     

西南三江地区矿产资源遥感综合预测方法

详细阐述了矿产资源遥感综合预测方法的工作程序、控矿要素的数字化分析与遥感找矿模型的建立,以及遥感矿产的综合分析评价方法与应用等,并以西南三江中段遥感综合预测成果佐证了矿产资源遥感综合预测方法在矿产资源预测中能使野外调查工作更具预见性和目的性,从而大大缩短了矿产资源调查的工作周期。     

多因素复杂系统最佳因素权重确定的一种新思路——以深港西部通道工程深圳湾公路大桥为例

为了客观地反映各因素对目标问题的影响程度,本文首次提出了最佳因素权重概念。定义最佳因素权重为研究区域内系统质量处于极限状态时的各因素权重之组合。结合深港西部通道工程深圳湾公路大桥桥址比选方案,详细说明了本方法的研究思路及其确定方法。通过最佳因素权重方法,能客观地、定量地确定出多因素复杂系统中的最优场址。     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

天津气象塔风温梯度观测资料的统计特征

利用天津气象塔风温梯度观测资料对其统计特征及平均风温廓线的日变化规律进行了分析，特别是分析了稳定层结的风温廓线特征，还给出了几种典型天气的低层大气结构的个例分析。     

猝死与气象条件的关系

通过调查1999年1～12月上海市医疗救护中心急救的839例院外猝死病例，并与同期气象资料进行分析，发现院外猝死男性多于女性，高发年龄为60～84岁，院外猝死在年内的高峰期为冬季，在昼夜中的高峰点为早晨07时，既往有心血管病史是院外猝死的主要原因。总猝死数与相对湿度、平均气压呈正相关，与最低气温、平均气温呈负相关，心血管猝死数除与以上气象要素相关外，还与气压变化、最低气温变化、日照时数变化等呈正相关。冠心病和其他心脏病与平均风速呈负相关，高血压病与平均气压呈正相关。     

日照市短时冰雹定时-定点-定量预报

利用1960～2000年青岛、射阳、徐州3站08时探空资料及日照站08时地面气象资料，分析了日照地区出现的16次降雹天气的时空分布特征，在对降雹天气分型的基础上利用积云数值模式计算降雹因子，用降雹因子和单站要素因子建立历史降雹因子个例库，用历史实况资料建立实况个例库，用距离相似法实现日照地区短时冰雹定时、定点、定量的客观预报。     

北京地区一次典型大雾天气的空气污染过程物理量分布特征

2002年11月30至12月4日，北京持续4天大雾天气，空气污染物在持续的稳定层结条件下，空气质量连续3天达5级以上。文中分析了大雾天气各主要污染物的变化特征，以及此次过程中天气形势的特点及演变，并对造成大雾日空气污染天气的物理量分布特征进行分析。结果表明：高空WNW气流、稳定性持续增加、逆温层结持续存在、低空风速较小、相对湿度大，导致局地污染物不能及时随大气扩散；1000～700hPa有弱的上升气流形成和维持，与500hPa高空下沉气流之间在低空的某层高度上形成稳定层结(逆温层)，导致大雾及重污染的形成；850hPa为暖区，850～500hPa为冷平流，有利于大雾的形成和加重。