关于数字相位式测距仪的频率改正

本文在分析自动脉冲数字测相基本原理的基础之上，推出了不仅与测距频率有关，而且还与填充脉冲频率及低频测相频率有关的新的频率改正公式，并给出新的频率改正公式与传统频率改正公式之间等同的条件，即有锁相环路（或频率跟踪电路）的正常工作来保证。     

DC型液动冲击器及调试情况

介绍了用于大口径钻探的ＤＣ型无簧式双作用液动冲击器的结构和工作原理及设计计算结果，给出了其冲程，上阀程和上阀自由行程，下阀程和下阀自由行程的测量及调整方法。     

岩石有限应变测量的莫尔圆图解网法

通常进行的应变测量需经过繁杂的数学计算或莫尔圆作图才能获得应变结果。本文介绍了笔者新设计的莫尔圆图解网及其使用方法。它可以快速准确地作出莫尔圆,进而求得应变结果,也可用于求解应力莫尔圆问题。     

高分辨率中子俘获伽马能谱测井

叙述了NCGS测井的原理及元素含量计算方法;解决了现场测井中计算元素含量时必须得到的参数,如等效相对探测效率曲线的刻度、探管和井液中干扰(Fe、Ti、H)份额的扣除。用自己研制的仪器经山东几个煤田钻孔实测资料验证.计算的元素含量与岩芯化学分析对照结果,其精度不低于美国PGT公司和Schlumberger公司制造的仪器。此外,还介绍了连续测量获得的谱,经处理绘制成连续曲线,首次推出S_(511)、S_B、S_H/S_B等曲线,提供多种有用地质信息。     

Numerical analysis model of horizontal displacement of active faults

In this paper, a numerical model was presented for interpreting the movement feature of an active fault zone. This model was based on the analytic solution, given by Crouch (Crouch, 1976), for the problem of displacement discontinuity in an infinite elastic solid, making full use of geodetic and geological data and it was constructed by the boundary element method. A numerous test computation shows that if you want to catch the possible seismic precursor from the displacement’s vector, you have to associate the computation with geological survey in a deep going way, otherwise you would fail in your propose. This method is valid for analysing the zone of strike-slip fault and it has some values for dealing with other analogous problems. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 153–158, 1993.     

缝长,尺度对水压致裂应力测量结果的影响规律

本文从弹性力学、断裂力学的基本理论出发,结合室内实验和野外观测结果研究了尺度、缝长对水压致裂应力测量结果的影响规律。研究结果表明,室内实验样品的孔径比不应大于四分之一,最好小于十分之一,较大的绝对尺度可以使实验结果变得稳定。野外实际测量除了满足上述要求外,裂缝单翼长度不应小于十倍的钻孔半径,否则测不到可靠的封闭压力。据此,进行大尺度水压致裂室内模拟实验对于提高压裂技术,完善水压致裂应力测量理论是非常必要的。     

Lunisolar Apsidal Resonances at low Satellite Orbits

Eccentricity resonances between the secular motion of an Earth satellite's orbit and the longitudes of the Sun and the Moon are studied within a Hamiltonian framework. The problem is approximated in a traditional manner, with the Earth's potential including only the second zonal harmonic, and a Hill‐type approximation for perturbing bodies. For a family of 10 resonances, stable and unstable points are identified and libration widths are estimated. Numerical values are given for the maximum variation of eccentricity available at each resonance. The respective amplitudes of the perigee heights' librations range from 2 to 750 km. The resonances of the solar origin are generally stronger than their lunar counterparts. This revised version was published online in July 2006 with corrections to the Cover Date.     

Use of Factor Analysis to Study the Distribution of Metalliferous Bauxitic Tailings in the Seabed of the Gulf of Corinth,Greece

In 1994, a detailed marine environmental survey was carried out in surface sediments of the northern flank (Antikyra Bay) and the basin floor of the Gulf of Corinth. Metalliferous tailings (red-mud slurry) of a bauxite processing plant are discharged through a pipeline at a water depth of 100 m, in the Antikyra Bay, covering an area of 16 km². The bauxitic tailings are detached from the main deposit at the outfalls, flow as turbidity currents downslope, and are redeposited on the basin floor of the Gulf of Corinth, where they cover an area of about 277 km². One hundred sediment samples, that were collected from red-mud deposits and the surrounding natural sediments, were analyzed for Ag, Al, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb, Si, Ti, V, and Zn concentrations. Statistical analysis of the heavy metals concentrations using factor analysis allowed (i) an examination of the interrelations among metals and (ii) distinguishing possible sample groups on the basis of metal concentrations in order to study the mechanisms of transport of the red mud and the degree of mixing with natural sediments. Factor 1 (Al, Cr, Ti, Fe, Co, Ni, Pb, Ag, Hg, V, Cd, and Cu) and the positive pole of Factor 2 (Cu, Ag, Cd, and Hg) are red-mud factors, reflecting different metal behaviors, which are related to processes that take place during the transport and redeposition of the red mud. The negative poles of Factors 2 and 3 and the positive pole of Factor 4 are related to natural sediment supply processes. Q-mode factor analysis identifies three distinct sediment groups located in different areas, on the base of the degree of mixing of red mud with natural sediments.     

Drought assessment in a south Mediterranean transboundary catchment

ABSTRACT

Predicting the impacts of climate change on water resources remains a challenging task and requires a good understanding of the dynamics of the forcing terms in the past. In this study, the variability of precipitation and drought patterns is studied over the Mediterranean catchment of the Medjerda in Tunisia based on an observed rainfall dataset collected at 41 raingauges during the period 1973–2012. The standardized precipitation index and the aridity index were used to characterize drought variability. Multivariate and geostatistical techniques were further employed to identify the spatial variability of annual rainfall. The results show that the Medjerda is marked by a significant spatio-temporal variability of drought, with varying extreme wet and dry events. Four regions with distinct rainfall regimes are identified by utilizing the K-means cluster analysis. A principal component analysis identifies the variables that are responsible for the relationships between precipitation and drought variability.     

中国大陆及其周边块体的现时运动、变形及其动力学解释

运用块体不连续变形分析方法 ,对利用GPS测量数据解算中国大陆及其周边块体的位移进行分析。结果显示 ,除块体 2、10、13为近东西方向的运动 ,块体 15为近北东向的运动外 ,其余块体均朝南东或南东东方向运动。同时 ,各块体还以各自的角速度绕其重心旋转。整个研究区在南北方向是压缩的 ,所得的最大主应力方向与利用震源机制解与原地应力测量的结果总的来说大体一致。最后 ,对产生中国大陆及周边块体运动与变形的动力源进行了讨论