Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.     

基于地性线分级的DEM信息量计算方法研究

主要对基于DEM提取的地性线进行信息量的定量分析,探讨地性线的信息量与分辨率、地形单元的关系。这个过程中首先利用河网的自相似理论研究与当前DEM所代表的地貌详细程度相适宜的地性线提取的阈值区间,并讨论此阈值下地性线的分级,以此为基础通过以该分级为权重进行DEM地形信息量的计算。实践证明,这种顾及地性线等级的DEM信息量计算方法能较准确地反映地性线的分布规律和不同等级的要素造成的信息量度量差异。     

车载移动测量系统应用于城市大比例尺地形图更新

将车载移动测量系统与城市大比例尺数字地形图测图相结合,成功地将车载移动测量系统运用于城市大比例尺测图更新应用中。通过在测区内布设靶标控制点,对比靶标的点云量算坐标与全站仪实测实际坐标,统计分析车载移动测量系统的测图精度。实验结果表明,车载移动测量系统能够满足城市大比例尺地形图测图要求。     

基于ArcMap的地图制作研究

随着计算机技术的飞速发展,计算机软件为地图设计和制作提供了更加便捷的操作模式,电子地图的出现摆脱了传统纸张对地图的限制,使其可以更好地为用户服务。ArcMap是一个统一的地理信息平台,在数据库制作、符号制作和地图装饰等方面具有独特的优势,适用范围广泛,在林业、牧业、电力等多行业具有非常好的数据展现效果,方便用户浏览、搜索和定位。本文从ArcMap制图流程入手,研究不同流程中制图方法。     

研习新时期地理信息系统中测量数据的管理方式

地理信息系统是把各种信息用地理以及相关的视图相结合,利用计算机及数据库技术对所需的信息进行收集和分析,经过分析和研究处理过的信息具有很高的使用价值,能够为土地利用、城市规划等各种大型工程提供数据参考。本文在简要阐述地理信息系统中测量数据管理问题的基础上,对新时期地理信息系统中测量数据管理的方式和优缺点及无缝空间数据管理的技术原理和优缺点进行了详细研究和分析。     

地基探测与NCEP GFS模式预报云量在ARM SGP站点对比

使用大气辐射测量实验(Atmospheric Radiation Measurements:ARM)在美国南部大平原站点(Southern Great Plains:SGP)长时间序列(2001 2010年)的地基主动遥感云(Active Remote Sensing of Clouds:ARSCL)和美国国家环境预报中心(National Centers for Environmental Prediction:NCEP)全球预报系统(Global Forecast System:GFS)模式预报资料,对比分析了两者云量在不同时间尺度内(年际、月份和季节)的差异。结果表明,GFS模式预报总云量为83.8%,略高于地基观测结果(78.1%);两者总云量差异在秋季最大(8.8%),春季最小(2.2%)。在低垂直高度分辨率(≥3 km)时,地基探测低云、中云和高云的云量分别为46.1%、43.5%和61.2%;模式预报三类云的云量均要高于地基探测的云量,差异分别为9.6%、17.2%和9.1%。但是,在高垂直分辨率(250 m)时,地基探测云量在大多数高度层上要高于模式预报结果。这应该是两种资料廓线中有云出现的高度层数目存在差异引起的。地基观测和GFS模式预报同时表明,SGP站点上空云量垂直廓线呈现双峰结构,在边界层附近(1 km)和上对流层区域(8-12 km)云量较大,2-3 km高度范围内云量较小。在春夏秋冬四个季节内,两种资料在低层边界层附近的最大云量偏差分别为9.5%、8.8%、7.8%和11.2%。     

利用GNSS干涉信号振荡幅度反演土壤湿度

根据干涉效应和GNSS接收机信噪比估计方法,推导了利用GNSS干涉信号幅度进行土壤湿度反演的模型,建模过程考虑了天线增益、土壤介电常数和噪声的影响。提出了使用AMPD算法从含有噪声的归一化干涉功率曲线中提取干涉峰值与谷值,进而反演了土壤介电常数与土壤湿度的方法,并对其进行了仿真。结果表明,利用提取出来的干涉谷值进行反演性能比峰值好,相对稳定准确的卫星仰角范围为5°~25°,湿度大于0.06cm~3/cm~3时反演结果更为准确,标准差在0.01cm~3/cm~3左右波动。     

运用社交网络分析淹水空间信息之关联性

随着社交网络的普遍发展,大量的讯息透过智能手机发布在个人的微博或其他社交网站。台湾地区的社交网站以脸书(Facebook)的使用量最大,平均每天有近千万笔的讯息量,大多数的讯息多以食衣住行或个人讯息为主,但从本研究所撷取自2010年至2015年的数据中显示,公众在社交网站所分享的信息中具有降雨、淹水或相关灾情的讯息,而这些讯息具有极高比例的正确性。由于社交网站无法提供私人讯息,故本研究将从社交信息中,以地点为单位撷取大量的数据信息再辅以语意关键词萃取出有关可作为淹水预判的讯息数据。为检核资料的可性度,本研究透过历史台风数据FLO-2D仿真重建淹水之空间信息进行检核。从研究比对分析中发现,经萃取后的公众信息其与灾害的关联性及正确性相当显着,故透过社交网站中大量的非结构讯息,透过语意及空间的转换,可萃取转化为防灾信息,对广域的都市治理而言,此一讯息将可作为预判区域淹水或防救灾情报之有效参考。     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

直线型海洋重力仪负漂移原因分析及处理

分析了直线型KSS31M(SN035)海洋重力仪短期负漂移现象的原因、采取的处理措施和经验总结,认为在减震措施不足的情况下,重力仪长期经受震动,而频繁的搬动会使重力仪弹性系统中的金属弹簧产生较大的弹性疲劳,这种影响在短时间内无法完全消除,由此可能导致月漂移超标;陀螺稳定平台轴因承受震动磨损较严重,轴承间隙变大,导致安装在平台之上的重力传感器经过抛物线测试之后不能完全垂直指向地心,重力在水平方向存在一个微小的分量,最终导致重力读数偏小,即短期负漂移;重力基点环境的变化等对漂移也有一定的影响。建议在搬动重力仪后将仪器保持足够长时间的恒温后再开机,密切监测一段时间,以确保仪器处于良好的工作状态。