基于三维激光扫描技术的岩质边坡泥化夹层空间分布和几何形态

为了定量研究泥化夹层的空间分布和几何形态,以云南省玉溪市生活垃圾焚烧发电厂高边坡局部开挖剖面为对象,利用徕卡ScanStation C10三维激光扫描仪和瑞典ROMER RA-7520-2六轴关节臂三维测量仪进行扫描,得到了开挖剖面和泥化夹层的原始点云数据;然后采用Cyclone和Geomagic Wrap软件对点云数据进行一系列处理,分析了泥化夹层的三维空间分布、层面产状、间距、层面粗糙度和几何形态。结果表明：大部分泥化夹层横向分布于整个扫描剖面,少数呈局部分布;泥化夹层的平均倾向为196.41°±5.51°,平均倾角为22.27°±2.23°,间距在3.7~49.1 cm之间,平均值为（20.4±12.0）cm;不同层位及同一层位不同横向位置的泥化夹层厚度都不等,最厚约20 mm,最薄小于1 mm;泥化夹层顶面局部典型区域的平面拟合偏差在-22.4~32.5 mm之间,沿夹层倾向的粗糙度系数在5.67~16.77之间,平均值为10.11±3.25;泥化夹层的表面积与体积之比在5.14~5.86 cm^-1之间。运用三维激光扫描技术研究泥化夹层的空间分布和几何形态是可行的。玉溪市生活垃圾焚烧发电厂高边坡的泥化夹层具有宏观整体上相对平直、相互近似平行、非等距分布、间距小、层数多、厚度薄,细观上顶面粗糙底面相对光滑、三维形态复杂的特点。     

水库现代沉积过程沉积磷的早期成岩作用模型研究

在沉积磷形态分析、孔隙水化学、核素计年以及吸附解吸实验等的基础上,运用一维“反应-平流-扩散”模型,研究了红枫湖现代沉积过程中磷的沉积改造。结果表明:红枫湖现代沉积过程中,有机态磷的矿化分解和铁结合态磷的络合/溶解,是控制沉积物磷迁移转化动力学的主要机制。沉积物-水界面附近有机磷的快速降解,可能克服沉积界面上铁氧化物对溶解磷的吸附缓冲,而形成向水体的磷酸盐迁移通量;自生磷灰石的沉积改造相对不明显,沉积磷向稳定形态含磷矿物(钙氟磷灰石)的转化过程同样不能影响红枫湖现代沉积过程中磷转化的质量平衡。     

反向沙丘近地层气流变化及其对沙丘形态的影响

反向沙丘形态-动力学过程是风沙地貌的重要研究内容.选择腾格里沙漠东南缘推平沙地发育的反向沙丘为研究对象,采用二维超声风速仪对沙丘表面5个位置0.25 m和0.5 m高度的气流进行野外观测.结果表明:(1)气流方向影响近地层气流特征.以沙丘脊线垂线为轴,0.25 m高度处沙丘脊线的垂线两侧风向变化不完全对称.当丘顶气流方...     

谈地下水数学模型在南干渠灌区中的预测与应用

地下水数学模型是用数学方法表述,经过概化地下水系统,在系统分析地下水补、径、排的基础上,对地下水预测分析的一种有效方法.随着南干渠灌区建成后水量的变化,本文通过选用适宜的数学模型,对灌区地下水资源量进行模拟计算,根据模拟计算结果对灌区地下水升幅进行预测,对灌区生态环境的变化做出评价.     

运用模糊数学法评价项城地下水水质

以频率统计法选择Hg、COD等评价因子,从隶属度、权重的计算以及模糊模型的选择等方面,详细介绍模糊数学法运用于项城市浅层地下水水质现状评价的过程,并结合综合指数评价结果对其进行简析.     

Late glacial fans in the eastern Skagerrak; depositional environment interpreted from swath bathymetry and seismostratigraphy

The origin of acoustically transparent fan deposits overlying glacial till and ice-proximal sediments on the southern margin of the Norwegian Channel has been studied using high-resolution seismic-reflection profiles and multibeam bathymetry. The first deposits overlying glacigenic sediments are a series of stacked, acoustically transparent submarine fans. The lack of glaciomarine sediments below and between individual fans indicates that deposition was rapid and immediately followed the break up of the Late Weichselian ice cover. The fans are overlain by stratified glaciomarine sediments and Holocene mud. Because of the uniformity of this drape, the upper surface of the fan deposits is mimicked at the present seafloor, and the bathymetric images clearly show the spatial relationship of the fans to bedrock ridges and the presence of braided channel-levee systems on the surface of the youngest fans. The acoustically transparent character of the fan deposits indicates that they comprise silt and clay, and their lobate form and lack of internal stratification indicates that they were deposited by debris flows. The channel-levee morphology indicates deposition from more watery hyperconcentrated fluid flows. The fan sediments were either derived from 1) erosion of Mid Weichselian lake deposits in southern Skagerrak or 2) from Late glacial ice-margin lake deposits, ponded against the Norwegian Channel ice stream, which collapsed catastrophically when the lateral support was removed as the ice disintegrated. Fans composed almost exclusively of fine-grained sediment need not, therefore, rule out an origin in a deglacial setting relatively close to the former margins of glaciers and ice sheets.     

The effect of a topographic high on the morphological stability of a two-inlet bay system

The cross-sectional stability of two tidal inlets connecting the same back-barrier lagoon to the ocean is investigated. The condition for equilibrium is the cross-sectional area tidal prism relationship. In an earlier study [Van de Kreeke, J., 1990. Can multiple inlets be stable? Estuarine, Coastal and Shelf Science 30: 261–273.], using the same equilibrium condition, it was concluded that where two inlets connect the same basin to the ocean ultimately one inlet will close. One of the major assumptions in that study was that the water level in the basin fluctuated uniformly. In hindsight this assumption might be too restrictive. For example, in the Wadden Sea the back barrier lagoon consists of a series of basins, rather than one single basin, separated by topographic highs. These topographic highs limit but do not exclude the exchange of water between the sub-basins. For this reason in the present study, a topographic high in the form of a weir was added, separating the back-barrier lagoon in two sub-basins. The water level in the sub-basins, rather than in the back-barrier as a whole, is assumed to fluctuate uniformly. For this schematization the hydrodynamic equations are solved using a finite difference method. The results, together with the equilibrium condition, yield the equilibrium flow curve for each of the inlets. The intersections of the two equilibrium flow curves represent combinations of cross-sectional areas for which both inlets are in equilibrium. The stability of the equilibriums was investigated using a non-linear stability analysis resulting in a flow diagram. Calculations were carried out for different inlet and weir characteristics. Sinussoidal tides were the same for both inlets. The results show that for relatively large wetted cross-sectional areas over the topographic high, approaching the situation of a single basin, there are no combinations of inlet cross-sectional areas for which both inlets are in a stable equilibrium. This supports the conclusion in the earlier study. For relatively small wetted cross-sectional areas over the topographic high there is one set of stable equilibriums. In that case the two-inlet bay system approaches that of two single-inlet bay systems.     

Peaks of People: Using Topographic Prominence as a Method for Determining the Ranked Significance of Population Centers

This article borrows a statistical method from physical geography—topographical prominence—to suggest a new technique for measuring the relative significance or rank of population centers. Unlike raw population measures, prominence gives consideration to both the spatial intensity of concentrated population areas as well as the spatial dependence or independence of neighboring settlement clusters in relation to one another. We explain how to apply the topographic prominence calculation method to gridded population data and examine its practical utility through case studies of several U.S. states. We then discuss some ways in which parametric choices about point-to-surface transformations can result in considerably different outcomes and offer further suggestions for conceptualizing and measuring population center significance.     

张家界旅游企业空间成长对城镇空间形态的影响

运用核密度估计法和标准差椭圆分析法,分析张家界旅游企业空间成长特征及演化过程;选取紧凑度指标,结合城镇空间均衡分布椭圆,分析张家界城镇空间形态演化过程;通过比较不同阶段旅游企业椭圆和城镇空间椭圆的重合面积,剖析旅游企业空间成长对城镇空间形态的影响程度。研究发现：① 张家界旅游企业空间成长过程和特征为：由出现期的“一核多极点”逐渐演变为生成期的“核心-边缘”,最后在发展期形成一个高集聚中心和三个次中心联动的“组团扩展型”格局;② 张家界建成区面积呈现增长态势,城镇空间不断扩展,建成区用地紧凑度逐渐下降;③ 不同阶段,张家界旅游企业空间成长对城镇空间形态的影响程度有一定的差异性,整体呈现出逐渐增强的趋势。研究结论对于重新认识旅游对城镇化建设的作用具有重要的现实意义。     

围海造陆条件下排海高温浓盐水对渤海湾温盐场分布影响模拟及预测

自2000年以来围绕渤海湾的围海工程剧增,致使工程区附近潮流场发生变化,进而影响排海高温浓盐水的时空分布特征。本文通过建立2000年和2015年两种不同岸线、地形条件下的三维数学模型对渤海湾沿岸3个电厂高温浓盐水表层排海问题进行模拟,研究结果表明,渤海湾的潮流场和高温浓盐水输移扩散特征在近十几年发生了较大变化:工程后,渤海湾平均盐度增大0.203,平均温度升高了0.105℃,同时曹妃甸附近海域浓盐水输移扩散速度明显增加。增大排放口流量至12.7 m3/s,湾内最高温度为26.46℃,较2015年最高温度增加了2.72℃。本文模型可准确模拟及预测排海废水盐度、温度分布特征,为合理布置水电联产设备排放口的位置提供理论基础。