贵州织金下寒武统黑色页岩矿物岩石成分及资源利用特征

通过野外采样、化学分析、电子探针(EPMA)和X射线衍射(XRD)分析等手段,研究了贵州织金地区黑色页岩矿物成分、化学组分、微量元素、稀土元素特征。研究区矿样化学成分以SiO_2和Al_2O_3为主,且具有高K低Na的特征。电子探针和X射线衍射分析表明,研究区黑色页岩主要矿物组成有石英、粘土矿物、白云石及黄铁矿等。织金黑色页岩中Pb、Ni、U、V、Cr等金属元素存在不同程度的富集,稀土元素总量为153.2×10~(-6)~224.89×10~(-6),属轻稀土元素富集型。同时从多金属层、页岩气、页岩提钾及近底部含磷铀矿资源等方面讨论了织金黑色页岩资源化利用。织金黑色页岩多金属层含有Mo、V、Ni、Ag及U等多金属元素,具综合利用价值;其中有机碳含量达到页岩气开发大于2%的条件,可进一步开展研究;页岩中伊利石含量较多,可提取黑色页岩中的钾制备含钾复合肥;黑色页岩底部与磷矿层接触带产出磷铀矿,主要为胶状磷铀矿,接触带可作为铀矿找矿的标志层。     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

新疆乌苏市巴音沟煤层气勘探井护壁堵漏技术

在煤层气勘探井固体岩心钻探施工过程中,遇岩层构造发育、地下水系发达的施工条件,钻进中往往发生钻井多层漏失、护壁困难的情况。因煤层气勘探井对录井工作的特殊要求,护壁堵漏工作的成功与否成为钻探施工的关键。在进行钻井护壁堵漏处理时,因技术方法不得当或未采取正确的计算经常导致护壁堵漏失败,甚至引发重大的钻探事故。通过对工区施工的经验总结,提出了切实可行的护壁堵漏技术措施,为类似地层钻井勘探施工提供借鉴。     

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.     

滑坡碎屑化运动物理模型相似材料特性研究

高速远程滑坡物理模型试验中,岩石相似材料的选择是模型试验成功的关键,然而目前滑坡相似材料强度高、难以在缩尺试验中模拟滑坡破碎过程。以重晶石、石英砂为骨料,石膏为胶结剂,羧甲基纤维素钠、甘油、水作为辅助材料,进行可破碎岩石相似材料的配比试验。采用控制变量法研究重晶石与石英砂比例（重石比）、骨料与胶结物比例（骨胶比）、羧甲基纤维素钠含量、拌合水量、甘油含量对相似材料物理力学性质的影响。试验结果表明:所有配比情况下各相似材料物理力学参数的范围分别为单轴抗压强度为0.12～1.47 MPa,弹性模量为25.51～148.12 MPa,黏聚力为1.63～87.39 kPa,内摩擦角为22.70°～35.89°,脆性指标主要分布在0.033～0.145之间;重石比主要控制岩石相似材料的内摩擦角;骨胶比减小,对应的黏聚力和内摩擦角先增大后减小;羧甲基纤维素钠对材料的单轴抗压强度、弹性模量、黏聚力等材料的力学特性以及材料的脆性指标影响均比较大,其中对单轴抗压强度的影响最大。因此,控制羧甲基纤维素钠和拌合水量的含量,并合理调节重石比与骨胶比,在相似比约为1∶600的试验尺度下,最终确定了适用于高速远程滑坡碎屑化过程模拟的低强度高脆性岩石相似材料的配比区间。     

基于地质建造的西南山区成土母质分类方案——以大凉山区为例

为适应生态地质调查和评价工作对成土母质研究的要求,以四川大凉山区为例,提出基于地质建造的成土母质分类方案,即以地质构造演化和地质建造环境为依据,结合残坡积物的成因类型对成土母质进行分类。大凉山区的成土母质可划分为第四纪冲洪积物、新近纪—第四纪砂泥岩类残坡积物、侏罗纪—白垩纪泥质岩类残坡积物、三叠纪砂泥岩类残坡积物、中生代中酸性岩类残坡积物、二叠纪基性—超基性岩类残坡积物、震旦纪—三叠纪砂泥岩类残坡积物、震旦纪—三叠纪碳酸盐岩类残坡积物、元古宙中酸性岩类残坡积物、元古宙火山碎屑岩类残坡积物、元古宙基性—超基性岩类残坡积物、元古宙变质岩类残坡积物等12类。研究表明,大凉山区成土母质和土壤存在差异性,但同一成土母质上的不同土壤类型具有一定相似的地球化学特征,不同成土母质形成的同一种土壤类型存在较大的地球化学差异。因此,基于地质建造的成土母质分类方案既能有效反映不同构造背景和成岩环境下的成土母质差异,又能有效表征成土母质与其上土壤的内在联系。     

基于遥感技术对黄河口水色与岸线季相变化特征研究

使用Landsat-5 TM 2004年11月24日与2005年5月13日黄河口遥感影像,配合准同期外业实测资料,进行黄河口水体水色物质叶绿素a与悬浮泥沙的动态反演与河口岸线解译.研究表明由于秋末与春初黄河上游来水物质含量的差异,上述悬浮指标值存在显著的季相差异.根据样值与光谱特征建立的反演模型得出的反演值与实测值有平均在0.85以上的相关关系,具有很好的反演效果.岸线解译成果表明,黄河口岸线演变迅速,在河流平枯水量时期仍然具有较强的变化,岸线推进尤以新河口附近显著.这表明,使用遥感手段是进行河口生态环境质量监测的有效手段,是进行岸线动态变化研究的一种基本技术支撑手段.     

Isotopic tracing of ore-forming source materials for Dexing porphyry copper deposit of Jiangxi, China

Dexing copper deposit is the biggest porphyry copper deposit in China. By researching isotopes of C, Si and Cu from the samples of Tongchang and Fujiawu ore-field, the authors found that δ^13 CpDB values of siderite were close to the δ^13 CpDB value of original magma; δ^30Si values of the samples at the ore-forming stage were close to the δ^30 Si value range of magma, δ^30Si values of partial samples were far away from it; Cu isotopic compositions of massive chalcopyrite formed at the early ore-forming stage are higher than that of veinal chalcopyrite formed at the later ore-forming stage. The results show that ore-forming materials were mainly derived from the porphyry body, and part of them were from wall rock materials.     

哈尔滨市大地水准面精化的思路

详细介绍了哈尔滨市大地水准面精化所采用的基础资料、精化思路以及精度检验方法.     

深海滑坡灾害的物质点法模拟

深海滑坡可以沿着斜坡搬运大量沉积物,是危害巨大的海洋地质灾害之一。评估深海滑坡的流滑机制并量化分析其对海底结构物的冲击对海洋资源的开发利用至关重要。采用物质点法对滑坡的滑动特性进行了总应力分析。设计了三组不同的土体、海床参数,展现了三种不同的滑动形态:延展、块体和扩张。随后复现了流滑体对部分暴露管线的冲击过程,并对冲击力的稳定值进行了分析,分析中考虑了流滑体的惯性、抗剪强度和静压力的影响。研究表明,物质点法能够用于模拟深海滑坡的流滑过程及其对海底结构物的冲击,可以为海洋工程中的实际设计工作提供服务。