近、现代黄河三角洲地貌形态反演

1855年黄河改夺大清河河道后于山东利津县东北入海。至今黄河尾癌河道历经10次大的改道变迁，塑造了近、现代黄河三角洲，形成了7个主要的亚三洲堆积体。该文利用黄河尾癌河道改道资料，近、现代河口流路变迁图，近、现代黄河三角洲体系图以及1985－1986年的水文工程地质钻孔资料，在研究黄河三角洲沉积模式的基础上，对工程地质钻孔数据进行沉积层序分析，将今论古，反推近、现代黄河三角洲沉积地貌，研究结果近似展示了近、现代黄河三角洲二维平面的发育演变和其时其地的地貌形态。     

海底MT信号采集电路的设计

设计海底大地电磁信号采集电路，需考虑海底信号特征、海上作业以及海底环境等各种因素。分析表明，除遵循电路设计的一般原则外，海底大地电磁测量要重点解决微弱信号检测、智能化数据采集、海底环境监测和同步记录等4个方面的问题。在设计方案中，电路灵敏度达到微伏级；使用嵌入式计算机实现采集控制；对方位、倾斜、振动、温度等参数进行巡回记录；仪器的时钟精度精准到微秒。所研制的电路经过了室内模拟测试和海洋试验。首次采集到中国海域的大地电磁数据。     

Inversion of receiver function by wavelet transformation

Introduction Receiver function has been extensively applied in studying S wave velocity of crust and up-per mantle for about 20 years (Owens, et al, 1987; LIU, et al, 1996), which is a time series ob-tained by the deconvolution of vertical component from horizontal component for teleseismic P waveform. Receiver function represents the teleseismic P plane wave response of crust and upper mantle beneath seismic station, from which the source and propagation effects are removed. Receiver funct…     

Geostatistical inversion of coupled problems: dealing with computational burden and different types of data

Practical application of geostatistical inversion to coupled problems is hampered by a number of difficulties. In this paper, we address two of them: first, the computational cost of sensitivity (Jacobian) matrices and, second, the evaluation of the relative weights of different types of data. Regarding the first, we revise the adjoint state equations to propose a form whose cost is independent of the number of unknown parameters and only grows with the number of observation wells. Regarding the second, we derive expressions for the relative weights of different types of data. These expressions are based on minimizing the expected likelihood, rather than the likelihood itself. The efficiency of both improvements is tested on a synthetic example. The example analyzes a wide range of groundwater flow and solute transport conditions. Yet, the expected likelihood consistently yields the optimal weights. The proposed form of the adjoint state equations leads to one order of magnitude reduction in CPU time with respect to the conventional sensitivity equations.     

吐哈盆地中央构造带正反转演化特征

吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。     

POSITIVE INVERSION STRUCTURE OF THE CENTRAL STRUCTURE BELT IN TURPAN-HAMI BASIN

The central structure belt in Turpan-Hami basin is composed of the Huoyanshan structure and Qiketai structure formed in late Triassic-early Jurassic, and is characterized by extensional tectonics. The thickness of strata in the hanging wall of the growth fault is obviously larger than that in the footwall, and a deposition center was evolved in the Taibei sag where the hanging wall of the fault is located. In late Jurassic the collision between Lhasa block and Eurasia continent resulted in the transformation of the Turpan-Hami basin from an extensional structure into a compressional structure, and consequently in the tectonic inversion of the central structure belt of the Turpan-Hami basin from the extensional normal fault in the earlier stage to the compressive thrust fault in the later stage. The Tertiary collision between the Indian plate and the Eurasian plate occurred around 55Ma, and this Himalayan orogenic event has played a profound role in shaping the Tianshan area, only the effect of the collision to this area was delayed since it culminated here approximately in late Oligocene-early Miocene. The central structure belt was strongly deformed and thrusted above the ground as a result of this tectonic event.     

Magnetotelluric Investigation of the Hydrothermal System and Heat Source in the Muine-Toyoha Geothermal Area, Hokkaido, Japan

Abstract. Magnetotelluric (MT) surveys were carried out around the Muine volcano, Hokkaido, Japan, where it is expected that the heat and metal source forming the polymetallic Ag-Pb-Zn-Cu-In Toyoha deposit is present at depth. Measurements were performed at 20 sites, 18 of which were located along a WSW-ENE profile traversing the north ridge of Mt. Muine. A resistivity model obtained from 2D inversion of the MT data shows subsurface specific conductive and resistive features. Conductive layers are present at the surface of Mt. Muine. The low resistivity is probably due to the clay-rich rocks associated with the hydrothermal alteration. A high resistivity layer, which corresponds to the pre-Tertiary Usubetsu Formation, crops out east of Mt. Muine and dips westward. At the west foot of Mt. Muine, relatively high resistive layers are widely exposed. The resistivity increases with depth and exceeds 1000 ohm-m. This fact indicates that this region is not influenced by the recent hydrothermal activity. An extremely conductive zone about 3–6 km wide and 6–9 km thick exists at a depth of 2 km below Mt. Muine. This zone mostly corresponds to an elastic wave attenuation zone detected by a seismic survey. It is interpreted as a large hydrothermal reservoir or melted magma, which is a heat source of the hydrothermal system in this area.     

Geomechanical model for the post-Variscan evolution of the Permocarboniferous–Mesozoic basins in Northeast Germany

The Permocarboniferous basins in Northeast Germany formed on the heterogeneous and eroded parts of the Variscan orogene and its deformed northern foreland. Transtensional tectonic movements and thermal re-equilibration lead to medium-scale crustal fragmentation, fast subsidence rates and regional emplacement of large amounts of mostly acidic volcanics. The later basin formation and differentiation was triggered by reversals of the large-scale stress field and reactivation of prominent zones of weakness like the Elbe Fault System and the Rhenohercynian/Saxothuringian boundary that separate different Variscan basement domains in the area. The geomechanical behaviour of the latter plays an important role for the geodynamic evolution of the medium to large-scale structural units, which we can observe today in three dimensions on structural maps, geophysical recordings and digital models. This study concentrates on an area that comprises the southern Northeast German Basin, the Saale Basin, the Flechtingen High, the Harz Mountains High and the Subhercynian Basin. The presented data include re-evaluations of special geological and structural maps, the most recent interpretation of the DEKORP BASIN 9601 seismic profile and observations of exposed rock sections in Northeast Germany. On the basis of different structural inventories and different basement properties, we distinguish two structural units to the south and one structural unit to the north of the Elbe Fault System. For each unit, we propose a geomechanical model of basin formation and basin inversion, and show that the Rhenohercynian Fold and Thrust Belt domain is deformed in a thin-skinned manner, while the Mid-German Crystalline Rise Domain, which is the western part of the Saxothuringian Zone, rather shows a thick-skinned deformation pattern. The geomechanical model for the unit north to the Elbe Fault System takes account to the fact that the base of the Zechstein beneath the present Northeast German basin shows hardly any evidence for brittle deformation, which indicates a relative stable basement. Our geomechanical model suggests that the Permocarboniferous deposits may have contributed to the structural stiffness by covering small to medium scale structures of the upper parts of the brittle basement. It is further suggested that the pre-Zechstein successions underneath the present Northeast German basin were possibly strengthening during the Cretaceous basin inversion, which resulted in stress transfer to the long-lived master faults, as indicated for example by the shape of the salt domes in the vicinity of the latter faults. Contrary to this, post-Zechstein successions deformed in a different and rather complex way that was strongly biased by intensive salt tectonic movements.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.