吉尔嘎朗图凹陷宝饶洼槽下白垩统层序地层与沉积体系

运用高分辨率层序地层学原理和方法,通过对钻井和地震资料的综合分析,在二连盆地吉尔嘎朗图凹陷下白垩统中识别出1个超长期基准面旋回(二级层序)SSC1和5个长期基准面旋回(三级层序):LSC1,LSC2,LSC3,LSC4,LSC5,分析了各旋回的发育特征。识别出五种类型的沉积体系:滨浅湖近岸水下扇、较深水湖浊积扇、滨浅湖扇三角洲、滨浅湖辫状河三角洲和河流沉积体系,并在等时地层格架内分析了各基准面旋回的沉积体系构成和储层砂体的发育情况。综合分析生、诸、盖条件后认为,在垂向上,LSC3旋回为本区最有利的储集层段,在平面上,本区的油气勘探应主要寻找宝饶构造带辫状河三角洲前缘砂体,主要储层砂体类型为前缘分流水道砂和前缘席状砂。     

下庄铀矿田337矿床成矿流体稀土元素示踪

337铀矿床位于下庄矿田东缘,区内发育近EW向、NNE向构造裂隙群及NW向辉绿岩和正长岩脉体,发育以碱性为主的多种围岩蚀变。区内矿床主要赋矿围岩的稀土元素特征属壳源型。矿石内金属矿物以沥青铀矿为主,矿石的LREE/HREE比值为3.25,Sm/Nd比值平均为0.307,Ce/Yb比值为7.127,这些数据都显示出成矿流体具有较深来源。矿石较围岩亏损稀土元素尤其是轻稀土元素,稀土元素分布模式平缓,与幔源辉绿岩特别是与正长岩的稀土元素分布模式相近,负铕异常比围岩更为强烈,反映成矿流体的来源具有幔源性。结合区域地质特征,可以认为337矿床成矿流体来源具有幔源性质。     

乌江下游沿岸滑坡发育特征

乌江是黔东北和渝东南少数民族地区与外界联系的一条水上黄金通道。担负了流域内80％以上的客货运输量。满足了沿岸2000多万人民生产和生活必需品运输的需要。乌江下游的彭水县城至涪陵市是乌江进入长江航运的咽喉要道，沿岸广泛分布和频繁发生的滑坡严重地威胁着航运的安全。通过现场调查发现，在长约150km范围内，两岸共发育各类滑坡28个，发育线模数为0．187个／km。沿岸滑坡发育形式主要为岩石顺层滑坡和风化堆积层滑坡。沿岸滑坡具有群发性的分布特征，与地层岩性和河谷岸坡类型等密切相关。岩石顺层滑坡主要集中分布在顺向岸坡软、硬岩层相间地段。风化堆积层滑坡则主要分布在软岩地层及其风化物堆积的岸坡地段。构造变动、河流的切蚀作用及人类活动是滑坡发育形成的主要原因，暴雨和长时间降雨是滑坡发生的重要诱发因素。目前，多数滑坡处于稳定状态，少数滑坡受降雨及江水涨落的影响而处于周期性蠕动变形状态。三峡水库蓄水后，部分滑坡有复活的可能。     

雷达遥感在澜沧江中下游地区锰矿调查评价中的应用

澜沧江吓游地区地处热带-亚热带，植被及第四系覆盖严重，应用雷达遥感技术可以初步揭露植覆盖，利用SAR图像识别主要岩石类型和构造形式，并圈定了主要含锰岩系，进而确定了成锰有利地段。     

中下扬子区二叠系露头层序地层研究

按新近国际年代地层划分方案（ICS，2000），下扬子区二叠纪地层自下向上分为3统，9阶和相对应的华南传统6阶划分。二叠系从阿瑟尔阶至长兴阶（44Ma)共划分出14个三级层序，每个三级层序平均时限约为3.14Ma，其中“紫松阶”）相当阿瑟尔＋2／3萨克马尔阶）1个（船山组中上部）、“隆林阶、（相当1／3萨克马尔阶＋阿丁斯克阶）2个（分别对应船山组上部和梁山组或镇江组）、“栖霞阶”（相当库班甘德阶＋1／3罗德阶）3个（栖霞组），“茅口阶”（相当于2／3罗德阶＋沃德阶＋卡皮丹阶）4个（孤峰组，茅口组，堰桥组，银屏组和武穴组），吴家坪阶2个（龙潭组或吴家坪组），长兴阶2个（长兴组或大隆组）；共归并为4个层序组（sequence set)。     

富碱斑岩中超镁铁深源包体岩石的矿物学特征

在云南省鹤庆县六合乡富碱斑岩体中找到超镁铁深源岩石包体，这对于研究富碱斑岩的起源和演化及其成岩成矿作用具有重要意义。本文较系统地研究了深源包体岩石的矿物学特征，揭示该深源包体具有原始上地幔岩在地幔条件下受到一定程度富集地幔流体交代作用改造的特征，具有富集地幔低程度部分熔融属性，为富碱斑岩的成岩成矿演化提供了重要的矿物学依据。     

Lithosphere structure of European sedimentary basins from regional three-dimensional gravity modelling

A three-dimensional (3D) density model, approximated by two regional layers—the sedimentary cover and the crystalline crust (offshore, a sea-water layer was added), has been constructed in 1° averaging for the whole European continent. The crustal model is based on simplified velocity model represented by structure maps for main seismic horizons—the “seismic” basement and the Moho boundary. Laterally varying average density is assumed inside the model layers. Residual gravity anomalies, obtained by subtraction of the crustal gravity effect from the observed field, characterize the density heterogeneities in the upper mantle. Mantle anomalies are shown to correlate with the upper mantle velocity inhomogeneities revealed from seismic tomography data and geothermal data. Considering the type of mantle anomaly, specific features of the evolution and type of isostatic compensation, the sedimentary basins in Europe may be related into some groups: deep sedimentary basins located in the East European Platform and its northern and eastern margins (Peri-Caspian, Dnieper–Donets, Barents Sea Basins, Fore–Ural Trough) with no significant mantle anomalies; basins located on the activated thin crust of Variscan Western Europe and Mediterranean area with negative mantle anomalies of −150 to −200×10⁻⁵ ms⁻² amplitude and the basins associated with suture zones at the western and southern margins of the East European Platform (Polish Trough, South Caspian Basin) characterized by positive mantle anomalies of 50–150×10⁻⁵ ms⁻² magnitude. An analysis of the main features of the lithosphere structure of the basins in Europe and type of the compensation has been carried out.     

Study and review on crust-mantle velocity structure in Bohai Bay and its vicinity

Introduction Bohai Bay, along with its adjacent areas, is one of the seismically active areas in North China. Understanding its crust/upper-mantle structural characteristics and lateral heterogeneity of the medium in this area is of great significance to the study of seismogenic environment, thus improvimg the level of earthquake prediction. For years, scientists have studied the area by gravity and magnetic methods (FENG, et al, 1989), geothermal field (WU, et al, 1988; TIAN, ZHANG, 19…     

Recycling in the Puerto Rican mantle wedge, Greater Antilles Island Arc

Abstract The initial volcanic phase of Cretaceous island arc strata in central Puerto Rico, at the eastern end of the extinct Greater Antilles Arc, comprises a 6‐km thick pile of lava and volcanic breccia (Río Majada Group). Preserved within the sequence is a conspicuous shift in absolute abundances of the more incompatible elements, including Th, Nb, and the light rare earth elements (LREE: La, Ce, Pr and Nd). The compositional shift is marked by a decrease in La/Sm from averages of 2.11 in the lowest third of the pile (Formation A) to 1.48 at the top (Formation C), and by a distinctive flattening of LREE segments of chondrite‐normalized REE patterns. i⁸⁷Sr/⁸⁶Sr and ?_Nd average about 0.7035 and 8.2, respectively, in early Formation A basalts. These ranges normally overlap samples from later Formations B and C. Isotope compositions of the latter group are more variable, however, and several samples are considerably more radiogenic than Formation A basalts, such that i⁸⁷Sr/⁸⁶Sr averages almost 0.7042 while ?_Nd‐values decrease to 7.5 in Formation B and C basalts. Theoretical models of non‐modal melting processes in both amphibole peridotite and spinel lherzolite sources provide insight into the origin of depleted Th, Nb, and LREE abundances in Puerto Rican basalts. Low Nb concentrations less than normal mid‐oceanic ridge basalts in Formation A basalts indicate the wedge was slightly depleted by low‐volume decompression fusion due to induced convection in the back‐arc region prior to entry of the source into the arc melting zone. However, depleted patterns in Formation C basalts cannot be generated by relatively greater degrees of decompression fusion in the back‐arc, because addition of the La‐enriched slab‐derived component to more depleted source material invariably produces elevated rather than decreased La/Sm. Refluxing of Formation A harzburgitic residua is similarly precluded. In contrast, the observed patterns are readily reproduced by multistage melting models involving hybridized sources containing normal Formation A lherzolite source material blended with recycled, unrefluxed harzburgite residua. Successful models require hybrid sources containing large volumes of recycled harzburgite (up to 50%) during generation of Formation C basalts. Slightly elevated radiometric Sr and Nd isotopes in a few flows from Formation C are attributed to partial refluxing of the hybrid sources within the wedge.