Sedimentary characteristics of tide-dominated estuary in Donghetang Formation（Upper Devonian）, central Tarim Basin

The Donghetang Formation （Upper Devonian） in central Tarim Basin has been thought an important oil and gas reservoir since the abundant oil and gas resources were found in the wells W16, W20, W34, and other fields. However, the sedimentary environment of the Donghetang Formation has been disputed because it suffered from both tidal and fluvial actions and there were not rich fossils in the sandstone. After the authors analyzed sedimentary features by means of drill cores, well logging data, paleosols, and with SEM obseruations, three kinds of sedimentary environments were distinguished： alluvial fan, tide-dominated estuary, and shelf. Particularly, the sedimentary features of tide-dominated estuary were studied in detail. Besides, the authors discussed sedimentary characteristics of the Donghetang Formation which was divided into two fourth-order sequences and five system tracts. At the same time, according to the forming process of five system tracts, the whole vertical evolution and lateral transition of tide-dominated estuary were illustrated clearly. Finally, the reservoir quality was evaluated based on porosity and permeability.     

Upscaling of elastic properties for large scale geomechanical simulations

Large scale geomechanical simulations are being increasingly used to model the compaction of stress dependent reservoirs, predict the long term integrity of under‐ground radioactive waste disposals, and analyse the viability of hot‐dry rock geothermal sites. These large scale simulations require the definition of homogenous mechanical properties for each geomechanical cell whereas the rock properties are expected to vary at a smaller scale. Therefore, this paper proposes a new methodology that makes possible to define the equivalent mechanical properties of the geomechanical cells using the fine scale information given in the geological model. This methodology is implemented on a synthetic reservoir case and two upscaling procedures providing the effective elastic properties of the Hooke's law are tested. The first upscaling procedure is an analytical method for perfectly stratified rock mass, whereas the second procedure computes lower and upper bounds of the equivalent properties with no assumption on the small scale heterogeneity distribution. Both procedures are applied to one geomechanical cell extracted from the reservoir structure. The results show that the analytical and numerical upscaling procedures provide accurate estimations of the effective parameters. Furthermore, a large scale simulation using the homogenized properties of each geomechanical cell calculated with the analytical method demonstrates that the overall behaviour of the reservoir structure is well reproduced for two different loading cases. Copyright © 2004 John Wiley & Sons, Ltd.     

Experimental research on reservoir sensitivity to stress and impacts on productivity in Kela 2 Gas Field

Kela 2 Gas Field, with high formation pressure (74.35MPa), high pressure coefficient (2.022) and difficulty of potential test and evaluation, is the largest integrated proved dry gas reservoir in China so far and the principal source for West-East Gas Development Project. In order to correctly evaluate the elastic-plastic deformation of rocks caused by the pressure decline during production, some researches, as the experiment on reservoir sensitivity to stress of gas filed with abnormal high pressure, are made. By testing the rock mechanic properties, porosities and permeabilities at different temperature and pressure of 342 core samples from 5 wells in this area, the variations of petro-physical properties at changing pressure are analyzed, and the applicable inspection relationship is concluded. The average productivity curve with the reservoir sensitivity to stress is plotted on the basis of the research, integrated with the field-wide productivity equation. The knowledge lays a foundation for the gas well productivity evaluation in the field and the gas field development plan, and provides effective techniques and measures for basic research on the development of similar gas fields.     

夏季红枫湖地区农田土壤-大气界面汞交换通量的初步研究

采用动力学通量箱法(Dynamic Flux Chamber)与高时间分辨率大气测汞仪联用技术对贵州红枫湖地区土壤-大气界面间汞交换通量进行了初步研究.结果显示,红枫湖地区土壤-大气界面间汞交换通量变化范围为-8.6 ng～215.3 ng@m-2@h-1,平均27.4士40.1 ng/m2@h(n=255);且土壤与大气界面间的汞交换是双向的既有土壤汞的释放,又有大气汞的沉降,主要以土壤汞的释放为主(n释放=253,n沉降=2n).土壤汞的释放通量与土壤温度、气温、光照强度有强相关关系,相关系数分别为0.80、0.83、0.74.     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

南方公益性页岩气调查研究进展

2019—2021年期间,由中国地质调查局油气资源调查中心牵头组织实施的“南方页岩气地质调查工程”,以实现“新区、新层系、新类型、新认识”四新领域油气调查战略发现和突破,推动创建页岩气勘查开发新格局为目标,按照总体部署、分步实施、点上突破、面上评价原则,重点开展了南方复杂构造区页岩气地质调查与评价工作。圈定并优选了一批页岩气远景区和有利区,部署实施了二维地震、参数井和压裂试气工程,实现了长江上游新区新层系页岩气重大突破和发现,完成垭紫罗裂陷槽、皖江、川西南等重点地区页岩气资源潜力评价。这些成果大大提振了南方复杂构造区页岩气油气资源勘查的信心,推动了油气地质调查与科技创新的深度融合,形成了页岩气成藏理论新认识和调查评价新技术,发挥了公益性油气资源调查的引领和带动作用。     

泌阳凹陷毕店地区油藏特征浅析

泌阳凹陷毕店地区经过三十多年的勘探,一直没有取得实质性的突破。2005年以来对该区三维地震资料重新处理与解释攻关,基本具备了精细勘探的物质基础。毕店地区主体已发现的油气藏类型以断层+岩性油气藏为主。通过应用系统的研究思路,以现代石油地质理论为指导,初步探讨毕店地区油藏分布特征与油气成藏的控制作用。     

油藏GIS图元编辑UNDO/REDO功能的实现

应用二次开发组件面向特定领域开发GIS系统,其撤销和重做功能应针对相应需求来定制实现。本文设计了一种存储用户编辑操作结果的栈结构,并针对油藏GIS的实际应用需求进行了优化。在栈数据结构的基础上,本文介绍了用户编辑操作记录接口RecordEdit、撤销操作接口UndoEdit和重做操作接口RedoEdit的程序运行逻辑。最后,作者使用Visual Basic 6.0开发平台结合MapObjects开发组件对UNDO/REDO功能模块进行了实现,并集成到一个油藏开发动态分析图形系统中,得到了实际的应用。     

浅析《三峡库区地图集》的设计特点与主要技术

详细论述了《三峡库区地图集》的内容结构与编排体系的设计特点、版面设计与表达创新,以及图集制作的主要技术问题和处理方法。     

航测立体采集在水库河流测量中的应用

自古以来,水库和河流等水利工程就是一件关系着国计民生的大事。水库的库容及水库的调度,河流的河道情况,关系到防洪安全、水库区及河流两岸居民的居住环境的变化和蓄水兴利。本文介绍了大中型水库库区范围内,以及沿河两岸地物、地貌的航空摄影的内业采集及采集过程中所遇到的困难以及解决办法。