在卸荷产生拉剪情况下裂隙岩体的力学行为

据岩体在卸荷情况下的拉剪应力状态,确定了节理岩体的线弹性断裂力学模型。依照此模型,可以得到相对远离裂隙(该位置的点到裂隙中心的距离比裂缝长度大)且受裂隙影响区域内应力、应变和变形方程。这些对评估裂隙岩石变形有重要的参考意义。通过用理论方程的计算结果和卸荷情况下试验观测所得的数据对比,证明该模型应用于实际工程中具有可行性。     

Algorithm of Calculation of Lyapounov Coefficients for Analysis of Chemical Autooscillations, as Applied to Calcite Crystallization Model

The numerical algorithm of calculation of Lyapounov coefficients (L _k) of any order is developed. The apparatus of analytical calculations is not used in this algorithm. The proposed algorithm is of use for usual computer languages and allows us to find the numerical value of L _k for any k and to make complete qualitative analyses of dynamic models on the plane.     

数值模式中长波辐射参数化方案的对比试验

应用一个简化的长波辐射参数方案，与郭晓岚－钱永甫模式原有长波辐射参数化方案进行了对比，分析了它们对１００ｈＰａ，３００ｈＰａ，５００ｈＰａ，７００ｈＰａ及地面的高度场、温度场、流场及气压场模拟结果的影响，发现不仅两者结果相当一致，而且与实测结果也符合很好。     

Analytical and experimental investigations on seismic performance of exterior beam–column subassemblages of existing RC‐framed building

Seismic performance of exterior beam–column subassemblages of reinforced concrete structure designed and detailed on the basis of the provisions of Eurocode and Indian Standards at different stages of their evolution is evaluated. Performance of the subassemblages designed and detailed according to the three different stages of codal evolution (gravity load design, ‘Nonductile’, and ‘Ductile’) is evaluated through analytical formulations and experimental investigations. In the ‘NonDuctile’ specimens, it has been observed that the shear distortion and degradation in stiffness and strength are significantly high. Performance of the ‘Ductile’ specimens based on Eurocode and Indian Standards is almost similar in terms of strength and stiffness degradation. Nevertheless, the specimen designed on the basis of Indian Standard shows higher energy dissipation at a given drift ratio. In the analytical study, shear and flexural failure of members of subassemblage and shear failure of the joint are considered as possible modes of failure of the beam–column subassemblage. For evaluating the shear strength of the joint region, a soften strut‐and‐tie model is used. Analytically obtained strengths based on the failure criteria of different components of the specimens have been first validated with experimental results and then used to determine the strength of the specimens. The investigation could indicate even the mode of failure at local level. It is utmost important to mention here that even the ductile specimens dissipate most of the energy through the development of damage in the joint region, which is neither desirable nor safe for the stability of whole structure. Copyright © 2013 John Wiley & Sons, Ltd.     

Testing mathematical uranium migration models in combined ESR/U-series dating of fossil teeth from open-air sites

Several mathematical models have been suggested to describe uranium migration kinetics for ESR dating of fossil tooth. In the present study, different U-uptake models were used to calculate ages for fossil teeth from two open-air Paleolithic sites in Nihewan Basin – Donggutuo and Hougou and compared with independent age control of the sites. For Donggutuo site, the results show that the ages of three teeth calculated by EU and AU models were much younger than magnetostratigraphic age. At Hougou site, two teeth from the top of Nihewan lacustrine deposits give the consistent EU and AU ages within errors but younger than sediment OSL age. This study indicates that mathematical modeling could not always give convincing results for the open-air sites, which may experience dramatic hydrological variations and high erosion rates.     

Modeling the potential distribution of shallow-seated landslides using the weights of evidence method and a logistic regression model： a case study of the Sabae Area, Japan

A number of statistical methods are typically used to effectively predict potential landslide distributions. In this study two multivariate statistical analysis methods were used （weights of evidence and logistic regression） to predict the potential distribution of shallow-seated landslides in the Kamikawachi area of Sabae City, Fukui Prefecture, Japan. First, the dependent variable （shallow-seated landslides） was divided into presence and absence, and the independent variables （environmental factors such as slope and altitude） were categorized according to their characteristics. Then, using the weights of evidence （WE） method, the weights of pairs comprising presence （w^＋（i）） or absence （w^-（i））, and the contrast values for each category of independent variable （evidence）, were calculated, Using the method that integrated the weights of evidence method and a logistic regression model, score values were calculated for each category of independent variable. Based on these contrast values, three models were selected to sum the score values of every gird in the study area. According to a receiver operating characteristic curve analysis （ROC）, model 2 yielded the best fit for predicting the potential distribution of shallow-seated landslide hazards, with 89% correctness and a 54.5% hit ratio when the occurrence probability （OP） of landslides was 70%. The model was tested using data from an area close to the study region, and showed 94% correctness and a hit ratio of 45.7% when the OP of landslides was 70%. Finally, the potential distribution of shallow-seated landslides, based on the OP, was mapped using a geographical information system.     

桩承式路堤土拱效应发挥过程研究

通过三维模型试验对桩承式路堤中土拱效应发挥过程进行了研究,重点分析了不同桩顶盖板尺寸、不同加筋方式下应力折减系数与差异沉降之间的关系。结果表明,土拱效应随变形的增加而发挥;加筋材料的设置减小了差异沉降,削弱了填土中的土拱效应,荷载向桩顶的传递是土拱效应和拉膜效应共同作用的结果。采用有限元法对桩间距、填土高度等未能在模型试验中考虑的关键因素进行了参数敏感性分析,总结了土拱效应发挥过程的相关规律。根据有限元计算结果、试验数据和文献中收集到的实测资料,提出用土拱效应发挥系数和归一化位移来描述土拱效应的发挥过程,建议二者之间采用双曲线方程模拟,从而在设计中体现土拱效应随位移的发展,并满足路堤填土、加筋材料和地基之间的变形协调要求。     

GPS高程测量在也门Block69中的应用分析

GPS高程测量代替常规水准测量的技术和方法已经成为这些年来许多大地测量学者们研究的热门课题之一,本文简单地介绍了GPS高程测量的模型及其适用范围,并通过在也门Block 69的应用分析,说明了在高程异常值变化平缓的平坦地区,只需测定少量（不少于3个）较均匀分布于测区的已知高程控制点,采用平面拟合法,拟合精度就能够达到测区测量精度的要求。     

根据GPS和InSAR数据反演2001年昆仑山口西地震同震破裂分布

利用干涉合成孔径雷达（interferometric synthetic aperture radar, InSAR）技术可以获取空间连续的地表形变监测结果,但仅能得到真实三维形变在雷达视线方向上的一维投影,降低了地表形变解译的可靠性。全球导航卫星系统（global navigation satellite system, GNSS）可提供高精度的三维形变结果,但其空间分辨率较低。因此可通过融合InSAR和GNSS来实现高精度高空间分辨率的三维地表形变监测。提出利用方差分量估计(variance component estimation, VCE)方法对经典的联合大地和卫星同步形变测量值的应变张量估计(simultaneous and integrated strain tensor estimation from geodetic and satellite deformation measurements, SISTEM)方法进行改进,发挥SISTEM方法可以考虑相邻点地表形变的空间相关性的优势,优化了函数模型中InSAR和GNSS观测的构成比例,引入VCE方法精确估计了各类观测值的后验方差,进而实现了高精度的三维地表形变测量。首先通过设计模拟实验对所提方法进行了验证,然后将该方法应用于2007年夏威夷基拉韦厄火山喷发案例中。相较于SISTEM方法,该方法在东西、南北、垂直向解算的形变精度均有大幅提升。     

冻土三轴蠕变非线性数学模型研究

采用MTS-810液压伺服材料试验机, 对人工配制的冻黏土试件进行了三轴蠕变试验, 获得了冻黏土在复杂应力状态下的蠕变曲线. 结果表明: 冻土的蠕变变形具有较强的温度敏感性, 温度越高, 这种温度敏感性越强; 相同温度下, 荷载越大, 变形越大. 运用相关理论, 推导了冻黏土在复杂应力状态下的三轴蠕变非线性数学模型, 采用MATLAB软件的数据拟合功能得到了模型方程参数的数值, 模型参数与温度之间存在密切关系, 建立了二者之间的数学表达式. 冻土三轴蠕变非线性数学模型的曲线与试验曲线拟合精度较高, 建立的数学模型可以精确体现冻土的蠕变规律, 能够为实际冻土工程的变形发展预测提供有效的理论指导.