Identifying and quantifying urban recharge: a review

The sources of and pathways for groundwater recharge in urban areas are more numerous and complex than in rural environments. Buildings, roads, and other surface infrastructure combine with man-made drainage networks to change the pathways for precipitation. Some direct recharge is lost, but additional recharge can occur from storm drainage systems. Large amounts of water are imported into most cities for supply, distributed through underground pipes, and collected again in sewers or septic tanks. The leaks from these pipe networks often provide substantial recharge. Sources of recharge in urban areas are identified through piezometry, chemical signatures, and water balances. All three approaches have problems. Recharge is quantified either by individual components (direct recharge, water-mains leakage, septic tanks, etc.) or holistically. Working with individual components requires large amounts of data, much of which is uncertain and is likely to lead to large uncertainties in the final result. Recommended holistic approaches include the use of groundwater modelling and solute balances, where various types of data are integrated. Urban recharge remains an under-researched topic, with few high-quality case studies reported in the literature. Electronic Publication     

Denudation and cooling of the Lake Teletskoye Region in the Altai Mountains (South Siberia) as revealed by apatite fission-track thermochronology

Lake Teletskoye occupies a narrow graben located in the northwestern sector of the Altai fold belt in South Siberia. The lake basin is thought to have formed during the Pleistocene as a distant result of the Cenozoic collision of India and Eurasia that caused a tectonic reactivation of the Palaeozoic Gorny–Altai (GA) and West Sayan (WS) blocks.The present work reports of a pilot fission-track study performed on 13 apatite separates collected from rocks that were sampled along two profiles in close proximity of the lake. The age–length data and AFT thermochronological modelling reveal two important phases of cooling in the Altai Mountains, a first one during the Late Jurassic–Early Cretaceous and a second one that started in the Miocene–Pliocene and that persists until today. The first event is interpreted to result from uplift-induced denudation probably related to the closure of the Mongol–Okhotsk Ocean; the second event can be linked to the young Cenozoic movements that lie at the origin of the formation of the Lake Teletskoye basin.     

Intercomparison of IRS-P4-MSMR derived geophysical products with DMSP-SSM/I and TRMM-TMI finished products

In this paper, MSMR geophysical products like Integrated Water Vapour (IWV), Ocean Surface Wind Speed (OWS) and Cloud Liquid Water (CLW) in different grids of 50, 75 and 150 kms are compared with similar products available from other satellites like DMSP-SSM/I and TRMMTMI. MSMR derived IWV, OWS and CLW compare well with SSM/I and TMI finished products. Comparison of MSMR derived CLW with that derived from TMI and SSM/I is relatively in less agreement. This is possibly due to the use of 37 GHz in SSM/I and TMI that is highly sensitive to CLW, while 37 GHz channels are not available on MSMR. Monthly comparison of MSMR geophysical products with those from TMI is all carried out for climatological purpose. The monthly comparisons were much better compared to instantaneous comparisons. In this paper, details of the data analysis and comparison results are presented. The usefulness of the MSMR vis-à-vis other sensors is also discussed.     

δO of carbonate, quartz and phosphate from belemnite guards: implications for the isotopic record of old fossils and the isotopic composition of ancient seawater

Belemnite guards of Cretaceous and Jurassic age were found to contain varying amounts of quartz deposited both on the external surface and inside the rostrum. The oxygen isotopic composition of coexisting carbonate, quartz and phosphate from the same rostrum was measured according to well-established techniques. None of these compounds showed isotopic values in equilibrium with one another. Assuming δ¹⁸O values of the diagenetic water within the range of meteoric waters, the δ¹⁸O(SiO₂) yield temperatures in agreement with the apparent secondary origin of this phase. The δ¹⁸O(CO₃²⁻) range, with a certain continuity, between −10.8 and +0.97 PDB-1 with most of the intermediate values being within the range of the carbonate isotopic values of Mesozoic fossils. The most positive isotopic results obtained from phosphate are close to +23/+24‰ (V-SMOW). They can hardly be related to a secondary origin of the phosphate, or to the presence of diagenetic effects, since these results are among the most positive ever measured on phosphate. As far as we know there is no widespread diagenetic process determining an ¹⁸O enrichment of phosphate. The very low concentration of phosphate did not allow the determination of its mineralogical composition. All the available δ¹⁸O(PO₄³⁻) values from belemnite and non-belemnite fossils of marine origin of Tertiary and Mesozoic age are reported along with the newly measured belemnites. The following conclusions may be drawn from the data reported: (1) the pristine oxygen isotope composition of fossil marine organisms (either carbonate or phosphate) may easily undergo fairly large changes because of oxygen isotope exchange processes with diagenetic water; this process is apparent even in the case of geologically recent fossils; (2) the δ¹⁸O(PO₄³⁻) of belemnite rostra seems to be, at least in the case of the most positive results, in isotopic equilibrium with environmental water because of the similarity between the results from Cretaceous belemnites and the results from Cretaceous and Lower Tertiary pelecypods and fish teeth; 3) if so, the only feasible interpretation that can be suggested for the ¹⁸O enriched data is the possibility of a relatively large variation of the oxygen isotopic composition of ocean paleowater from Jurassic to recent time.     

Seismic evaluation of existing nuclear facility using ambient vibration test to characterize dynamic behavior of the structure and microtremor measurements to characterize the soil: a case study

The methods used for a building seismic hazard evaluation are presented with the associated results. The goals of the study are (1) to check the soil nature and the existence or not of a possible site effect around the installation and (2) to characterize the dynamic behavior of the building using ambient vibration records.

The results of the soil study with the Nakamura method are very difficult to interpret because they are not stable in space and time. The spectral ratios method has been used with regional earthquake records. The results of the application of this method allowed us to conclude that the installation was free of site effect.

The ambient vibration measurements on the building brought the conclusion to determine the first and second modes of the structure. These results have been used to calibrate numerical model. The modal shapes in plan (high roof) and in elevation (main column) have been evaluated. The damping of the building has been computed using ambient vibration records.     

The paleogeographic implications of loess mounds: Laizhou Bay plain

The loess mounds are a newly discovered type of landforms on the Laizhou Bay plain south of the Bohai Sea. Research shows that they were formed in the late period of the late Pleistocene when the Bohai Sea was exposed in the period of late Wümu glacial age and changed into plain. As the exposed area is not protected by vegetation, the sediments at the sea bottom are blown and transported southward by strong north winds, and deposit on the coastal plains. As thick loess is accumulated, the loess mound landforms are formed in the direction of down wind.     

Managed relocation: an assessment of its feasibility as a coastal management option

Managed relocation is explained and examined as an option to add to the usual categories considered in relation to managing coastal erosion. The paper considers the relocation of buildings in one unit, as opposed to demolition and re-construction. The standard coastal erosion management options are briefly noted and how managed relocation can fit into these options is explained. This paper focuses on four case studies. Two examples are from the USA and two from the UK; of these, two (one in each of the UK and USA) took place during the nineteenth century. Managed relocation is proposed as being feasible in particular cases, particularly where there are isolated historic or high value buildings.     

PowerBuilder 8.0中C/S模式应用过渡到B/S模式应用的实现技术

简要分析了PowerBuilder 8．0中各种B/S解决方案的优劣，探讨了适用于已有C／S模式应用过渡到B／S模式应用的实现方法，以及利用ASP技术实现对不同类型的客户测览器隐藏底层实现方法的技术，并给出了C／S模式应用过渡到B／S模式应用的一个实例。     

b值在地震预测中的三类应用及其物理基础与须注意的问题

将b值在地震预测中的直接应用归为三类：1）根据b值的动态变化预测地震。2）根据G－R律求出各级地震平均复发周期或年均发生率，推测未来一定时段如50年或100年内发生各级地震的危险性。3）根据G－R直线在横轴的截距，预测强余震的震级。讨论了这三种用法的物理基础及现有工作中容易出现的问题。